ISO-10303-21;
HEADER;
FILE_DESCRIPTION((''),'2;1');
FILE_NAME('11123_ZGLOB_AL_30X30_ASM','2006-05-28T',('Work'),('Work d.o.o.'),
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2004440',
'PRO/ENGINEER BY PARAMETRIC TECHNOLOGY CORPORATION, 2004440','');
FILE_SCHEMA(('CONFIG_CONTROL_DESIGN'));
ENDSEC;
DATA;
#1=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2=DIRECTION('',(0.E0,1.E0,0.E0));
#3=DIRECTION('',(0.E0,0.E0,-1.E0));
#4=AXIS2_PLACEMENT_3D('',#1,#2,#3);
#6=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#7=DIRECTION('',(0.E0,1.E0,0.E0));
#8=DIRECTION('',(0.E0,0.E0,1.E0));
#9=AXIS2_PLACEMENT_3D('',#6,#7,#8);
#11=CARTESIAN_POINT('',(-1.35E1,0.E0,1.35E1));
#12=DIRECTION('',(0.E0,-1.E0,0.E0));
#13=DIRECTION('',(0.E0,0.E0,1.E0));
#14=AXIS2_PLACEMENT_3D('',#11,#12,#13);
#16=DIRECTION('',(1.E0,0.E0,0.E0));
#17=VECTOR('',#16,9.5E0);
#18=CARTESIAN_POINT('',(-1.35E1,0.E0,1.5E1));
#19=LINE('',#18,#17);
#20=DIRECTION('',(0.E0,0.E0,-1.E0));
#21=VECTOR('',#20,1.E0);
#22=CARTESIAN_POINT('',(-4.E0,0.E0,1.5E1));
#23=LINE('',#22,#21);
#24=DIRECTION('',(1.E0,0.E0,0.E0));
#25=VECTOR('',#24,8.E0);
#26=CARTESIAN_POINT('',(-4.E0,0.E0,1.4E1));
#27=LINE('',#26,#25);
#28=DIRECTION('',(0.E0,0.E0,-1.E0));
#29=VECTOR('',#28,1.E0);
#30=CARTESIAN_POINT('',(4.E0,0.E0,1.5E1));
#31=LINE('',#30,#29);
#32=DIRECTION('',(1.E0,0.E0,0.E0));
#33=VECTOR('',#32,9.5E0);
#34=CARTESIAN_POINT('',(4.E0,0.E0,1.5E1));
#35=LINE('',#34,#33);
#36=CARTESIAN_POINT('',(1.35E1,0.E0,1.35E1));
#37=DIRECTION('',(0.E0,-1.E0,0.E0));
#38=DIRECTION('',(1.E0,0.E0,0.E0));
#39=AXIS2_PLACEMENT_3D('',#36,#37,#38);
#41=DIRECTION('',(0.E0,0.E0,-1.E0));
#42=VECTOR('',#41,9.5E0);
#43=CARTESIAN_POINT('',(1.5E1,0.E0,1.35E1));
#44=LINE('',#43,#42);
#45=DIRECTION('',(-1.E0,0.E0,0.E0));
#46=VECTOR('',#45,1.E0);
#47=CARTESIAN_POINT('',(1.5E1,0.E0,4.E0));
#48=LINE('',#47,#46);
#49=DIRECTION('',(0.E0,0.E0,-1.E0));
#50=VECTOR('',#49,8.E0);
#51=CARTESIAN_POINT('',(1.4E1,0.E0,4.E0));
#52=LINE('',#51,#50);
#53=DIRECTION('',(-1.E0,0.E0,0.E0));
#54=VECTOR('',#53,1.E0);
#55=CARTESIAN_POINT('',(1.5E1,0.E0,-4.E0));
#56=LINE('',#55,#54);
#57=DIRECTION('',(0.E0,0.E0,-1.E0));
#58=VECTOR('',#57,9.5E0);
#59=CARTESIAN_POINT('',(1.5E1,0.E0,-4.E0));
#60=LINE('',#59,#58);
#61=CARTESIAN_POINT('',(1.35E1,0.E0,-1.35E1));
#62=DIRECTION('',(0.E0,-1.E0,0.E0));
#63=DIRECTION('',(0.E0,0.E0,-1.E0));
#64=AXIS2_PLACEMENT_3D('',#61,#62,#63);
#66=DIRECTION('',(-1.E0,0.E0,0.E0));
#67=VECTOR('',#66,9.5E0);
#68=CARTESIAN_POINT('',(1.35E1,0.E0,-1.5E1));
#69=LINE('',#68,#67);
#70=DIRECTION('',(0.E0,0.E0,1.E0));
#71=VECTOR('',#70,1.E0);
#72=CARTESIAN_POINT('',(4.E0,0.E0,-1.5E1));
#73=LINE('',#72,#71);
#74=DIRECTION('',(-1.E0,0.E0,0.E0));
#75=VECTOR('',#74,8.E0);
#76=CARTESIAN_POINT('',(4.E0,0.E0,-1.4E1));
#77=LINE('',#76,#75);
#78=DIRECTION('',(0.E0,0.E0,1.E0));
#79=VECTOR('',#78,1.E0);
#80=CARTESIAN_POINT('',(-4.E0,0.E0,-1.5E1));
#81=LINE('',#80,#79);
#82=DIRECTION('',(-1.E0,0.E0,0.E0));
#83=VECTOR('',#82,9.5E0);
#84=CARTESIAN_POINT('',(-4.E0,0.E0,-1.5E1));
#85=LINE('',#84,#83);
#86=CARTESIAN_POINT('',(-1.35E1,0.E0,-1.35E1));
#87=DIRECTION('',(0.E0,-1.E0,0.E0));
#88=DIRECTION('',(-1.E0,0.E0,0.E0));
#89=AXIS2_PLACEMENT_3D('',#86,#87,#88);
#91=DIRECTION('',(0.E0,0.E0,1.E0));
#92=VECTOR('',#91,9.5E0);
#93=CARTESIAN_POINT('',(-1.5E1,0.E0,-1.35E1));
#94=LINE('',#93,#92);
#95=DIRECTION('',(1.E0,0.E0,0.E0));
#96=VECTOR('',#95,1.E0);
#97=CARTESIAN_POINT('',(-1.5E1,0.E0,-4.E0));
#98=LINE('',#97,#96);
#99=DIRECTION('',(0.E0,0.E0,1.E0));
#100=VECTOR('',#99,8.E0);
#101=CARTESIAN_POINT('',(-1.4E1,0.E0,-4.E0));
#102=LINE('',#101,#100);
#103=DIRECTION('',(1.E0,0.E0,0.E0));
#104=VECTOR('',#103,1.E0);
#105=CARTESIAN_POINT('',(-1.5E1,0.E0,4.E0));
#106=LINE('',#105,#104);
#107=DIRECTION('',(0.E0,0.E0,1.E0));
#108=VECTOR('',#107,9.5E0);
#109=CARTESIAN_POINT('',(-1.5E1,0.E0,4.E0));
#110=LINE('',#109,#108);
#111=DIRECTION('',(0.E0,-1.E0,0.E0));
#112=VECTOR('',#111,7.2E0);
#113=CARTESIAN_POINT('',(0.E0,7.2E0,-4.15E0));
#114=LINE('',#113,#112);
#115=DIRECTION('',(0.E0,-1.E0,0.E0));
#116=VECTOR('',#115,7.2E0);
#117=CARTESIAN_POINT('',(0.E0,7.2E0,4.15E0));
#118=LINE('',#117,#116);
#119=CARTESIAN_POINT('',(0.E0,7.2E0,0.E0));
#120=DIRECTION('',(0.E0,1.E0,0.E0));
#121=DIRECTION('',(0.E0,0.E0,-1.E0));
#122=AXIS2_PLACEMENT_3D('',#119,#120,#121);
#124=CARTESIAN_POINT('',(0.E0,7.2E0,0.E0));
#125=DIRECTION('',(0.E0,1.E0,0.E0));
#126=DIRECTION('',(0.E0,0.E0,1.E0));
#127=AXIS2_PLACEMENT_3D('',#124,#125,#126);
#129=CARTESIAN_POINT('',(-1.35E1,7.2E0,1.35E1));
#130=DIRECTION('',(0.E0,1.E0,0.E0));
#131=DIRECTION('',(-1.E0,0.E0,0.E0));
#132=AXIS2_PLACEMENT_3D('',#129,#130,#131);
#134=DIRECTION('',(0.E0,0.E0,1.E0));
#135=VECTOR('',#134,2.7E1);
#136=CARTESIAN_POINT('',(-1.5E1,7.2E0,-1.35E1));
#137=LINE('',#136,#135);
#138=CARTESIAN_POINT('',(-1.35E1,7.2E0,-1.35E1));
#139=DIRECTION('',(0.E0,1.E0,0.E0));
#140=DIRECTION('',(0.E0,0.E0,-1.E0));
#141=AXIS2_PLACEMENT_3D('',#138,#139,#140);
#143=DIRECTION('',(-1.E0,0.E0,0.E0));
#144=VECTOR('',#143,2.7E1);
#145=CARTESIAN_POINT('',(1.35E1,7.2E0,-1.5E1));
#146=LINE('',#145,#144);
#147=CARTESIAN_POINT('',(1.35E1,7.2E0,-1.35E1));
#148=DIRECTION('',(0.E0,1.E0,0.E0));
#149=DIRECTION('',(1.E0,0.E0,0.E0));
#150=AXIS2_PLACEMENT_3D('',#147,#148,#149);
#152=DIRECTION('',(0.E0,0.E0,-1.E0));
#153=VECTOR('',#152,2.7E1);
#154=CARTESIAN_POINT('',(1.5E1,7.2E0,1.35E1));
#155=LINE('',#154,#153);
#156=CARTESIAN_POINT('',(1.35E1,7.2E0,1.35E1));
#157=DIRECTION('',(0.E0,1.E0,0.E0));
#158=DIRECTION('',(0.E0,0.E0,1.E0));
#159=AXIS2_PLACEMENT_3D('',#156,#157,#158);
#161=DIRECTION('',(1.E0,0.E0,0.E0));
#162=VECTOR('',#161,2.7E1);
#163=CARTESIAN_POINT('',(-1.35E1,7.2E0,1.5E1));
#164=LINE('',#163,#162);
#165=DIRECTION('',(1.E0,0.E0,0.E0));
#166=VECTOR('',#165,1.2E0);
#167=CARTESIAN_POINT('',(-8.E0,7.2E0,-1.4E1));
#168=LINE('',#167,#166);
#169=DIRECTION('',(0.E0,0.E0,-1.E0));
#170=VECTOR('',#169,2.399802703964E1);
#171=CARTESIAN_POINT('',(-1.E1,7.2E0,1.199901351982E1));
#172=LINE('',#171,#170);
#173=DIRECTION('',(1.E0,0.E0,0.E0));
#174=VECTOR('',#173,1.2E0);
#175=CARTESIAN_POINT('',(-8.E0,7.2E0,1.4E1));
#176=LINE('',#175,#174);
#177=DIRECTION('',(0.E0,0.E0,-1.E0));
#178=VECTOR('',#177,2.399802703964E1);
#179=CARTESIAN_POINT('',(1.42E1,7.2E0,1.199901351982E1));
#180=LINE('',#179,#178);
#181=DIRECTION('',(1.E0,0.E0,0.E0));
#182=VECTOR('',#181,1.2E0);
#183=CARTESIAN_POINT('',(1.1E1,7.2E0,-1.4E1));
#184=LINE('',#183,#182);
#185=DIRECTION('',(0.E0,0.E0,1.E0));
#186=VECTOR('',#185,2.8E1);
#187=CARTESIAN_POINT('',(1.1E1,7.2E0,-1.4E1));
#188=LINE('',#187,#186);
#189=DIRECTION('',(1.E0,0.E0,0.E0));
#190=VECTOR('',#189,1.2E0);
#191=CARTESIAN_POINT('',(1.1E1,7.2E0,1.4E1));
#192=LINE('',#191,#190);
#193=DIRECTION('',(0.E0,-1.E0,0.E0));
#194=VECTOR('',#193,7.2E0);
#195=CARTESIAN_POINT('',(-1.5E1,7.2E0,1.35E1));
#196=LINE('',#195,#194);
#197=DIRECTION('',(0.E0,-1.E0,0.E0));
#198=VECTOR('',#197,2.6E0);
#199=CARTESIAN_POINT('',(-1.5E1,0.E0,4.E0));
#200=LINE('',#199,#198);
#201=DIRECTION('',(0.E0,-1.E0,0.E0));
#202=VECTOR('',#201,7.2E0);
#203=CARTESIAN_POINT('',(-1.5E1,7.2E0,-1.35E1));
#204=LINE('',#203,#202);
#205=DIRECTION('',(0.E0,-1.E0,0.E0));
#206=VECTOR('',#205,2.6E0);
#207=CARTESIAN_POINT('',(-1.4E1,0.E0,4.E0));
#208=LINE('',#207,#206);
#209=DIRECTION('',(0.E0,-1.E0,0.E0));
#210=VECTOR('',#209,2.6E0);
#211=CARTESIAN_POINT('',(-1.4E1,0.E0,-4.E0));
#212=LINE('',#211,#210);
#213=DIRECTION('',(0.E0,-1.E0,0.E0));
#214=VECTOR('',#213,2.6E0);
#215=CARTESIAN_POINT('',(-1.5E1,0.E0,-4.E0));
#216=LINE('',#215,#214);
#217=DIRECTION('',(0.E0,0.E0,-1.E0));
#218=VECTOR('',#217,8.E0);
#219=CARTESIAN_POINT('',(-1.5E1,-2.6E0,4.E0));
#220=LINE('',#219,#218);
#221=DIRECTION('',(-1.E0,0.E0,0.E0));
#222=VECTOR('',#221,1.E0);
#223=CARTESIAN_POINT('',(-1.4E1,-2.6E0,4.E0));
#224=LINE('',#223,#222);
#225=DIRECTION('',(0.E0,0.E0,1.E0));
#226=VECTOR('',#225,8.E0);
#227=CARTESIAN_POINT('',(-1.4E1,-2.6E0,-4.E0));
#228=LINE('',#227,#226);
#229=DIRECTION('',(1.E0,0.E0,0.E0));
#230=VECTOR('',#229,1.E0);
#231=CARTESIAN_POINT('',(-1.5E1,-2.6E0,-4.E0));
#232=LINE('',#231,#230);
#233=DIRECTION('',(1.E0,0.E0,0.E0));
#234=VECTOR('',#233,8.E0);
#235=CARTESIAN_POINT('',(-4.E0,-2.6E0,-1.5E1));
#236=LINE('',#235,#234);
#237=DIRECTION('',(0.E0,0.E0,-1.E0));
#238=VECTOR('',#237,1.E0);
#239=CARTESIAN_POINT('',(-4.E0,-2.6E0,-1.4E1));
#240=LINE('',#239,#238);
#241=DIRECTION('',(-1.E0,0.E0,0.E0));
#242=VECTOR('',#241,8.E0);
#243=CARTESIAN_POINT('',(4.E0,-2.6E0,-1.4E1));
#244=LINE('',#243,#242);
#245=DIRECTION('',(0.E0,0.E0,1.E0));
#246=VECTOR('',#245,1.E0);
#247=CARTESIAN_POINT('',(4.E0,-2.6E0,-1.5E1));
#248=LINE('',#247,#246);
#249=DIRECTION('',(0.E0,0.E0,-1.E0));
#250=VECTOR('',#249,1.E0);
#251=CARTESIAN_POINT('',(-4.E0,-2.6E0,1.5E1));
#252=LINE('',#251,#250);
#253=DIRECTION('',(-1.E0,0.E0,0.E0));
#254=VECTOR('',#253,8.E0);
#255=CARTESIAN_POINT('',(4.E0,-2.6E0,1.5E1));
#256=LINE('',#255,#254);
#257=DIRECTION('',(0.E0,0.E0,1.E0));
#258=VECTOR('',#257,1.E0);
#259=CARTESIAN_POINT('',(4.E0,-2.6E0,1.4E1));
#260=LINE('',#259,#258);
#261=DIRECTION('',(1.E0,0.E0,0.E0));
#262=VECTOR('',#261,8.E0);
#263=CARTESIAN_POINT('',(-4.E0,-2.6E0,1.4E1));
#264=LINE('',#263,#262);
#265=DIRECTION('',(-1.E0,0.E0,0.E0));
#266=VECTOR('',#265,1.E0);
#267=CARTESIAN_POINT('',(1.5E1,-2.6E0,4.E0));
#268=LINE('',#267,#266);
#269=DIRECTION('',(0.E0,0.E0,1.E0));
#270=VECTOR('',#269,8.E0);
#271=CARTESIAN_POINT('',(1.5E1,-2.6E0,-4.E0));
#272=LINE('',#271,#270);
#273=DIRECTION('',(1.E0,0.E0,0.E0));
#274=VECTOR('',#273,1.E0);
#275=CARTESIAN_POINT('',(1.4E1,-2.6E0,-4.E0));
#276=LINE('',#275,#274);
#277=DIRECTION('',(0.E0,0.E0,-1.E0));
#278=VECTOR('',#277,8.E0);
#279=CARTESIAN_POINT('',(1.4E1,-2.6E0,4.E0));
#280=LINE('',#279,#278);
#281=DIRECTION('',(0.E0,-1.E0,0.E0));
#282=VECTOR('',#281,7.2E0);
#283=CARTESIAN_POINT('',(-1.35E1,7.2E0,-1.5E1));
#284=LINE('',#283,#282);
#285=DIRECTION('',(0.E0,-1.E0,0.E0));
#286=VECTOR('',#285,2.6E0);
#287=CARTESIAN_POINT('',(-4.E0,0.E0,-1.5E1));
#288=LINE('',#287,#286);
#289=DIRECTION('',(0.E0,-1.E0,0.E0));
#290=VECTOR('',#289,7.2E0);
#291=CARTESIAN_POINT('',(1.35E1,7.2E0,-1.5E1));
#292=LINE('',#291,#290);
#293=DIRECTION('',(0.E0,-1.E0,0.E0));
#294=VECTOR('',#293,2.6E0);
#295=CARTESIAN_POINT('',(-4.E0,0.E0,-1.4E1));
#296=LINE('',#295,#294);
#297=DIRECTION('',(0.E0,-1.E0,0.E0));
#298=VECTOR('',#297,2.6E0);
#299=CARTESIAN_POINT('',(4.E0,0.E0,-1.4E1));
#300=LINE('',#299,#298);
#301=DIRECTION('',(0.E0,-1.E0,0.E0));
#302=VECTOR('',#301,2.6E0);
#303=CARTESIAN_POINT('',(4.E0,0.E0,-1.5E1));
#304=LINE('',#303,#302);
#305=DIRECTION('',(0.E0,-1.E0,0.E0));
#306=VECTOR('',#305,7.2E0);
#307=CARTESIAN_POINT('',(1.5E1,7.2E0,1.35E1));
#308=LINE('',#307,#306);
#309=DIRECTION('',(0.E0,-1.E0,0.E0));
#310=VECTOR('',#309,7.2E0);
#311=CARTESIAN_POINT('',(1.5E1,7.2E0,-1.35E1));
#312=LINE('',#311,#310);
#313=DIRECTION('',(0.E0,-1.E0,0.E0));
#314=VECTOR('',#313,2.6E0);
#315=CARTESIAN_POINT('',(1.5E1,0.E0,-4.E0));
#316=LINE('',#315,#314);
#317=DIRECTION('',(0.E0,-1.E0,0.E0));
#318=VECTOR('',#317,7.2E0);
#319=CARTESIAN_POINT('',(-1.35E1,7.2E0,1.5E1));
#320=LINE('',#319,#318);
#321=DIRECTION('',(0.E0,-1.E0,0.E0));
#322=VECTOR('',#321,7.2E0);
#323=CARTESIAN_POINT('',(1.35E1,7.2E0,1.5E1));
#324=LINE('',#323,#322);
#325=DIRECTION('',(0.E0,-1.E0,0.E0));
#326=VECTOR('',#325,2.6E0);
#327=CARTESIAN_POINT('',(4.E0,0.E0,1.5E1));
#328=LINE('',#327,#326);
#329=DIRECTION('',(0.E0,-1.E0,0.E0));
#330=VECTOR('',#329,2.6E0);
#331=CARTESIAN_POINT('',(4.E0,0.E0,1.4E1));
#332=LINE('',#331,#330);
#333=DIRECTION('',(0.E0,-1.E0,0.E0));
#334=VECTOR('',#333,2.6E0);
#335=CARTESIAN_POINT('',(-4.E0,0.E0,1.4E1));
#336=LINE('',#335,#334);
#337=DIRECTION('',(0.E0,-1.E0,0.E0));
#338=VECTOR('',#337,2.6E0);
#339=CARTESIAN_POINT('',(-4.E0,0.E0,1.5E1));
#340=LINE('',#339,#338);
#341=DIRECTION('',(0.E0,-1.E0,0.E0));
#342=VECTOR('',#341,2.6E0);
#343=CARTESIAN_POINT('',(1.4E1,0.E0,-4.E0));
#344=LINE('',#343,#342);
#345=DIRECTION('',(0.E0,-1.E0,0.E0));
#346=VECTOR('',#345,2.6E0);
#347=CARTESIAN_POINT('',(1.4E1,0.E0,4.E0));
#348=LINE('',#347,#346);
#349=DIRECTION('',(0.E0,-1.E0,0.E0));
#350=VECTOR('',#349,2.6E0);
#351=CARTESIAN_POINT('',(1.5E1,0.E0,4.E0));
#352=LINE('',#351,#350);
#353=DIRECTION('',(0.E0,-9.995070030757E-1,-3.139666865388E-2));
#354=VECTOR('',#353,1.592525645034E1);
#355=CARTESIAN_POINT('',(-8.E0,2.311740534789E1,-1.35E1));
#356=LINE('',#355,#354);
#357=DIRECTION('',(0.E0,9.995070030757E-1,3.139666865388E-2));
#358=VECTOR('',#357,1.592525645036E1);
#359=CARTESIAN_POINT('',(-6.8E0,7.2E0,-1.4E1));
#360=LINE('',#359,#358);
#361=DIRECTION('',(0.E0,9.995070030757E-1,3.139666865388E-2));
#362=VECTOR('',#361,1.592525645032E1);
#363=CARTESIAN_POINT('',(1.22E1,7.2E0,-1.4E1));
#364=LINE('',#363,#362);
#365=DIRECTION('',(0.E0,9.995070030757E-1,3.139666865388E-2));
#366=VECTOR('',#365,1.592525645036E1);
#367=CARTESIAN_POINT('',(1.1E1,7.2E0,-1.4E1));
#368=LINE('',#367,#366);
#369=CARTESIAN_POINT('',(-8.E0,2.305461201060E1,-1.150098599385E1));
#370=DIRECTION('',(0.E0,-9.995070030757E-1,-3.139666865389E-2));
#371=DIRECTION('',(-1.E0,0.E0,0.E0));
#372=AXIS2_PLACEMENT_3D('',#369,#370,#371);
#374=CARTESIAN_POINT('',(-1.E1,7.2E0,-1.199901351982E1));
#375=CARTESIAN_POINT('',(-1.E1,7.2E0,-1.233242905983E1));
#376=CARTESIAN_POINT('',(-9.855364820593E0,7.2E0,-1.285462496046E1));
#377=CARTESIAN_POINT('',(-9.443774130941E0,7.2E0,-1.344328089085E1));
#378=CARTESIAN_POINT('',(-8.855432776832E0,7.2E0,-1.385518615679E1));
#379=CARTESIAN_POINT('',(-8.333415540015E0,7.2E0,-1.4E1));
#380=CARTESIAN_POINT('',(-8.E0,7.2E0,-1.4E1));
#382=CARTESIAN_POINT('',(-8.E0,2.305461201060E1,1.150098599385E1));
#383=DIRECTION('',(0.E0,9.995070030757E-1,-3.139666865389E-2));
#384=DIRECTION('',(-1.E0,0.E0,0.E0));
#385=AXIS2_PLACEMENT_3D('',#382,#383,#384);
#387=CARTESIAN_POINT('',(-1.E1,2.25E1,0.E0));
#388=DIRECTION('',(-1.E0,0.E0,0.E0));
#389=DIRECTION('',(0.E0,0.E0,1.E0));
#390=AXIS2_PLACEMENT_3D('',#387,#388,#389);
#392=CARTESIAN_POINT('',(-1.E1,2.25E1,0.E0));
#393=DIRECTION('',(-1.E0,0.E0,0.E0));
#394=DIRECTION('',(0.E0,0.E0,-1.E0));
#395=AXIS2_PLACEMENT_3D('',#392,#393,#394);
#397=CARTESIAN_POINT('',(-1.E1,2.25E1,0.E0));
#398=DIRECTION('',(-1.E0,0.E0,0.E0));
#399=DIRECTION('',(0.E0,0.E0,-1.E0));
#400=AXIS2_PLACEMENT_3D('',#397,#398,#399);
#402=CARTESIAN_POINT('',(-1.E1,2.25E1,0.E0));
#403=DIRECTION('',(-1.E0,0.E0,0.E0));
#404=DIRECTION('',(0.E0,0.E0,1.E0));
#405=AXIS2_PLACEMENT_3D('',#402,#403,#404);
#407=DIRECTION('',(0.E0,-1.E0,0.E0));
#408=VECTOR('',#407,1.837697373889E0);
#409=CARTESIAN_POINT('',(-1.E1,2.79E1,-1.E0));
#410=LINE('',#409,#408);
#411=DIRECTION('',(0.E0,-1.E0,0.E0));
#412=VECTOR('',#411,1.837697373889E0);
#413=CARTESIAN_POINT('',(-1.E1,1.893769737389E1,-1.E0));
#414=LINE('',#413,#412);
#415=DIRECTION('',(0.E0,0.E0,1.E0));
#416=VECTOR('',#415,2.E0);
#417=CARTESIAN_POINT('',(-1.E1,1.71E1,-1.E0));
#418=LINE('',#417,#416);
#419=DIRECTION('',(0.E0,1.E0,0.E0));
#420=VECTOR('',#419,1.837697373889E0);
#421=CARTESIAN_POINT('',(-1.E1,1.71E1,1.E0));
#422=LINE('',#421,#420);
#423=DIRECTION('',(0.E0,1.E0,0.E0));
#424=VECTOR('',#423,1.837697373889E0);
#425=CARTESIAN_POINT('',(-1.E1,2.606230262611E1,1.E0));
#426=LINE('',#425,#424);
#427=DIRECTION('',(0.E0,0.E0,-1.E0));
#428=VECTOR('',#427,2.E0);
#429=CARTESIAN_POINT('',(-1.E1,2.79E1,1.E0));
#430=LINE('',#429,#428);
#431=DIRECTION('',(0.E0,-9.995070030757E-1,-3.139666865388E-2));
#432=VECTOR('',#431,1.586243214086E1);
#433=CARTESIAN_POINT('',(-1.E1,2.305461201060E1,-1.150098599385E1));
#434=LINE('',#433,#432);
#435=CARTESIAN_POINT('',(-1.E1,2.269334125879E1,0.E0));
#436=DIRECTION('',(-1.E0,0.E0,0.E0));
#437=DIRECTION('',(0.E0,3.139666865389E-2,9.995070030757E-1));
#438=AXIS2_PLACEMENT_3D('',#435,#436,#437);
#440=DIRECTION('',(0.E0,9.995070030757E-1,-3.139666865388E-2));
#441=VECTOR('',#440,1.586243214086E1);
#442=CARTESIAN_POINT('',(-1.E1,7.2E0,1.199901351982E1));
#443=LINE('',#442,#441);
#444=DIRECTION('',(1.E0,0.E0,0.E0));
#445=VECTOR('',#444,5.E-1);
#446=CARTESIAN_POINT('',(-1.E1,2.25E1,1.1E1));
#447=LINE('',#446,#445);
#448=DIRECTION('',(1.E0,0.E0,0.E0));
#449=VECTOR('',#448,5.E-1);
#450=CARTESIAN_POINT('',(-1.E1,2.25E1,-1.1E1));
#451=LINE('',#450,#449);
#452=CARTESIAN_POINT('',(-9.5E0,2.25E1,0.E0));
#453=DIRECTION('',(-1.E0,0.E0,0.E0));
#454=DIRECTION('',(0.E0,0.E0,1.E0));
#455=AXIS2_PLACEMENT_3D('',#452,#453,#454);
#457=CARTESIAN_POINT('',(-9.5E0,2.25E1,0.E0));
#458=DIRECTION('',(-1.E0,0.E0,0.E0));
#459=DIRECTION('',(0.E0,0.E0,-1.E0));
#460=AXIS2_PLACEMENT_3D('',#457,#458,#459);
#462=CARTESIAN_POINT('',(-9.5E0,2.25E1,0.E0));
#463=DIRECTION('',(1.E0,0.E0,0.E0));
#464=DIRECTION('',(0.E0,0.E0,1.E0));
#465=AXIS2_PLACEMENT_3D('',#462,#463,#464);
#467=CARTESIAN_POINT('',(-9.5E0,2.25E1,0.E0));
#468=DIRECTION('',(1.E0,0.E0,0.E0));
#469=DIRECTION('',(0.E0,0.E0,-1.E0));
#470=AXIS2_PLACEMENT_3D('',#467,#468,#469);
#472=CARTESIAN_POINT('',(-9.5E0,3.15E1,0.E0));
#473=DIRECTION('',(-1.E0,0.E0,0.E0));
#474=DIRECTION('',(0.E0,0.E0,1.E0));
#475=AXIS2_PLACEMENT_3D('',#472,#473,#474);
#477=CARTESIAN_POINT('',(-9.5E0,3.15E1,0.E0));
#478=DIRECTION('',(-1.E0,0.E0,0.E0));
#479=DIRECTION('',(0.E0,0.E0,-1.E0));
#480=AXIS2_PLACEMENT_3D('',#477,#478,#479);
#482=CARTESIAN_POINT('',(-9.5E0,1.35E1,0.E0));
#483=DIRECTION('',(-1.E0,0.E0,0.E0));
#484=DIRECTION('',(0.E0,0.E0,1.E0));
#485=AXIS2_PLACEMENT_3D('',#482,#483,#484);
#487=CARTESIAN_POINT('',(-9.5E0,1.35E1,0.E0));
#488=DIRECTION('',(-1.E0,0.E0,0.E0));
#489=DIRECTION('',(0.E0,0.E0,-1.E0));
#490=AXIS2_PLACEMENT_3D('',#487,#488,#489);
#492=DIRECTION('',(1.E0,0.E0,0.E0));
#493=VECTOR('',#492,5.E-1);
#494=CARTESIAN_POINT('',(-1.E1,2.25E1,7.E0));
#495=LINE('',#494,#493);
#496=DIRECTION('',(1.E0,0.E0,0.E0));
#497=VECTOR('',#496,5.E-1);
#498=CARTESIAN_POINT('',(-1.E1,2.25E1,-7.E0));
#499=LINE('',#498,#497);
#500=DIRECTION('',(1.E0,0.E0,0.E0));
#501=VECTOR('',#500,2.2E0);
#502=CARTESIAN_POINT('',(-9.5E0,3.15E1,1.2E0));
#503=LINE('',#502,#501);
#504=DIRECTION('',(1.E0,0.E0,0.E0));
#505=VECTOR('',#504,2.2E0);
#506=CARTESIAN_POINT('',(-9.5E0,3.15E1,-1.2E0));
#507=LINE('',#506,#505);
#508=CARTESIAN_POINT('',(-7.3E0,3.15E1,0.E0));
#509=DIRECTION('',(-1.E0,0.E0,0.E0));
#510=DIRECTION('',(0.E0,0.E0,1.E0));
#511=AXIS2_PLACEMENT_3D('',#508,#509,#510);
#513=CARTESIAN_POINT('',(-7.3E0,3.15E1,0.E0));
#514=DIRECTION('',(-1.E0,0.E0,0.E0));
#515=DIRECTION('',(0.E0,0.E0,-1.E0));
#516=AXIS2_PLACEMENT_3D('',#513,#514,#515);
#518=CARTESIAN_POINT('',(-7.3E0,1.35E1,0.E0));
#519=DIRECTION('',(-1.E0,0.E0,0.E0));
#520=DIRECTION('',(0.E0,0.E0,1.E0));
#521=AXIS2_PLACEMENT_3D('',#518,#519,#520);
#523=CARTESIAN_POINT('',(-7.3E0,1.35E1,0.E0));
#524=DIRECTION('',(-1.E0,0.E0,0.E0));
#525=DIRECTION('',(0.E0,0.E0,-1.E0));
#526=AXIS2_PLACEMENT_3D('',#523,#524,#525);
#528=DIRECTION('',(1.E0,0.E0,0.E0));
#529=VECTOR('',#528,2.2E0);
#530=CARTESIAN_POINT('',(-9.5E0,1.35E1,1.2E0));
#531=LINE('',#530,#529);
#532=DIRECTION('',(1.E0,0.E0,0.E0));
#533=VECTOR('',#532,2.2E0);
#534=CARTESIAN_POINT('',(-9.5E0,1.35E1,-1.2E0));
#535=LINE('',#534,#533);
#536=DIRECTION('',(-1.E0,0.E0,0.E0));
#537=VECTOR('',#536,1.9E0);
#538=CARTESIAN_POINT('',(-1.E1,2.79E1,-1.E0));
#539=LINE('',#538,#537);
#540=DIRECTION('',(-1.E0,0.E0,0.E0));
#541=VECTOR('',#540,1.9E0);
#542=CARTESIAN_POINT('',(-1.E1,2.79E1,1.E0));
#543=LINE('',#542,#541);
#544=DIRECTION('',(-1.E0,0.E0,0.E0));
#545=VECTOR('',#544,1.9E0);
#546=CARTESIAN_POINT('',(-1.E1,1.71E1,1.E0));
#547=LINE('',#546,#545);
#548=DIRECTION('',(-1.E0,0.E0,0.E0));
#549=VECTOR('',#548,1.9E0);
#550=CARTESIAN_POINT('',(-1.E1,1.71E1,-1.E0));
#551=LINE('',#550,#549);
#552=DIRECTION('',(0.E0,1.E0,0.E0));
#553=VECTOR('',#552,1.837697373889E0);
#554=CARTESIAN_POINT('',(-1.19E1,1.71E1,1.E0));
#555=LINE('',#554,#553);
#556=DIRECTION('',(0.E0,0.E0,1.E0));
#557=VECTOR('',#556,2.E0);
#558=CARTESIAN_POINT('',(-1.19E1,1.71E1,-1.E0));
#559=LINE('',#558,#557);
#560=DIRECTION('',(0.E0,-1.E0,0.E0));
#561=VECTOR('',#560,1.837697373889E0);
#562=CARTESIAN_POINT('',(-1.19E1,1.893769737389E1,-1.E0));
#563=LINE('',#562,#561);
#564=DIRECTION('',(0.E0,-1.E0,0.E0));
#565=VECTOR('',#564,1.837697373889E0);
#566=CARTESIAN_POINT('',(-1.19E1,2.79E1,-1.E0));
#567=LINE('',#566,#565);
#568=DIRECTION('',(0.E0,0.E0,-1.E0));
#569=VECTOR('',#568,2.E0);
#570=CARTESIAN_POINT('',(-1.19E1,2.79E1,1.E0));
#571=LINE('',#570,#569);
#572=DIRECTION('',(0.E0,1.E0,0.E0));
#573=VECTOR('',#572,1.837697373889E0);
#574=CARTESIAN_POINT('',(-1.19E1,2.606230262611E1,1.E0));
#575=LINE('',#574,#573);
#576=CARTESIAN_POINT('',(-1.19E1,2.25E1,0.E0));
#577=DIRECTION('',(1.E0,0.E0,0.E0));
#578=DIRECTION('',(0.E0,-1.E0,0.E0));
#579=AXIS2_PLACEMENT_3D('',#576,#577,#578);
#581=CARTESIAN_POINT('',(-1.19E1,2.25E1,0.E0));
#582=DIRECTION('',(1.E0,0.E0,0.E0));
#583=DIRECTION('',(0.E0,1.E0,0.E0));
#584=AXIS2_PLACEMENT_3D('',#581,#582,#583);
#586=CARTESIAN_POINT('',(-1.19E1,2.25E1,0.E0));
#587=DIRECTION('',(-1.E0,0.E0,0.E0));
#588=DIRECTION('',(0.E0,9.627844935436E-1,-2.702702702703E-1));
#589=AXIS2_PLACEMENT_3D('',#586,#587,#588);
#591=DIRECTION('',(-1.E0,0.E0,0.E0));
#592=VECTOR('',#591,1.9E0);
#593=CARTESIAN_POINT('',(-1.E1,1.893769737389E1,-1.E0));
#594=LINE('',#593,#592);
#595=CARTESIAN_POINT('',(-1.E1,2.25E1,0.E0));
#596=DIRECTION('',(1.E0,0.E0,0.E0));
#597=DIRECTION('',(0.E0,-9.627844935436E-1,-2.702702702703E-1));
#598=AXIS2_PLACEMENT_3D('',#595,#596,#597);
#600=DIRECTION('',(-1.E0,0.E0,0.E0));
#601=VECTOR('',#600,1.9E0);
#602=CARTESIAN_POINT('',(-1.E1,2.606230262611E1,-1.E0));
#603=LINE('',#602,#601);
#604=CARTESIAN_POINT('',(-1.E1,2.25E1,0.E0));
#605=DIRECTION('',(1.E0,0.E0,0.E0));
#606=DIRECTION('',(0.E0,9.627844935436E-1,2.702702702703E-1));
#607=AXIS2_PLACEMENT_3D('',#604,#605,#606);
#609=DIRECTION('',(-1.E0,0.E0,0.E0));
#610=VECTOR('',#609,1.9E0);
#611=CARTESIAN_POINT('',(-1.E1,1.893769737389E1,1.E0));
#612=LINE('',#611,#610);
#613=CARTESIAN_POINT('',(-1.19E1,2.25E1,0.E0));
#614=DIRECTION('',(-1.E0,0.E0,0.E0));
#615=DIRECTION('',(0.E0,-9.627844935436E-1,2.702702702703E-1));
#616=AXIS2_PLACEMENT_3D('',#613,#614,#615);
#618=DIRECTION('',(-1.E0,0.E0,0.E0));
#619=VECTOR('',#618,1.9E0);
#620=CARTESIAN_POINT('',(-1.E1,2.606230262611E1,1.E0));
#621=LINE('',#620,#619);
#622=DIRECTION('',(0.E0,0.E0,1.E0));
#623=VECTOR('',#622,2.8E1);
#624=CARTESIAN_POINT('',(-6.8E0,7.2E0,-1.4E1));
#625=LINE('',#624,#623);
#626=CARTESIAN_POINT('',(-6.8E0,2.25E1,0.E0));
#627=DIRECTION('',(1.E0,0.E0,0.E0));
#628=DIRECTION('',(0.E0,-1.E0,0.E0));
#629=AXIS2_PLACEMENT_3D('',#626,#627,#628);
#631=CARTESIAN_POINT('',(-6.8E0,2.25E1,0.E0));
#632=DIRECTION('',(1.E0,0.E0,0.E0));
#633=DIRECTION('',(0.E0,1.E0,0.E0));
#634=AXIS2_PLACEMENT_3D('',#631,#632,#633);
#636=CARTESIAN_POINT('',(-8.E0,2.269334125879E1,0.E0));
#637=DIRECTION('',(-1.E0,0.E0,0.E0));
#638=DIRECTION('',(0.E0,3.139666865388E-2,9.995070030757E-1));
#639=AXIS2_PLACEMENT_3D('',#636,#637,#638);
#641=DIRECTION('',(1.E0,1.426414542038E-11,4.455695072162E-13));
#642=VECTOR('',#641,1.2E0);
#643=CARTESIAN_POINT('',(-8.E0,2.311740534789E1,-1.35E1));
#644=LINE('',#643,#642);
#645=CARTESIAN_POINT('',(-6.8E0,2.269334125879E1,0.E0));
#646=DIRECTION('',(1.E0,0.E0,0.E0));
#647=DIRECTION('',(0.E0,3.139666865388E-2,-9.995070030757E-1));
#648=AXIS2_PLACEMENT_3D('',#645,#646,#647);
#650=CARTESIAN_POINT('',(1.22E1,2.269334125879E1,0.E0));
#651=DIRECTION('',(1.E0,0.E0,0.E0));
#652=DIRECTION('',(0.E0,3.139666865389E-2,-9.995070030757E-1));
#653=AXIS2_PLACEMENT_3D('',#650,#651,#652);
#655=CARTESIAN_POINT('',(1.1E1,2.269334125879E1,0.E0));
#656=DIRECTION('',(-1.E0,0.E0,0.E0));
#657=DIRECTION('',(0.E0,3.139666865388E-2,9.995070030757E-1));
#658=AXIS2_PLACEMENT_3D('',#655,#656,#657);
#660=DIRECTION('',(1.E0,-2.848092132505E-11,-8.940996091648E-13));
#661=VECTOR('',#660,1.2E0);
#662=CARTESIAN_POINT('',(1.1E1,2.311740534791E1,-1.35E1));
#663=LINE('',#662,#661);
#664=DIRECTION('',(0.E0,9.995070030757E-1,-3.139666865388E-2));
#665=VECTOR('',#664,1.592525645029E1);
#666=CARTESIAN_POINT('',(-8.E0,7.2E0,1.4E1));
#667=LINE('',#666,#665);
#668=DIRECTION('',(1.E0,5.263345315143E-11,-1.653492158008E-12));
#669=VECTOR('',#668,1.2E0);
#670=CARTESIAN_POINT('',(-8.E0,2.311740534785E1,1.35E1));
#671=LINE('',#670,#669);
#672=DIRECTION('',(0.E0,-9.995070030757E-1,3.139666865388E-2));
#673=VECTOR('',#672,1.592525645036E1);
#674=CARTESIAN_POINT('',(-6.8E0,2.311740534791E1,1.35E1));
#675=LINE('',#674,#673);
#676=DIRECTION('',(0.E0,-9.995070030757E-1,3.139666865388E-2));
#677=VECTOR('',#676,1.592525645033E1);
#678=CARTESIAN_POINT('',(1.22E1,2.311740534788E1,1.35E1));
#679=LINE('',#678,#677);
#680=DIRECTION('',(0.E0,-9.995070030757E-1,3.139666865388E-2));
#681=VECTOR('',#680,1.592525645036E1);
#682=CARTESIAN_POINT('',(1.1E1,2.311740534791E1,1.35E1));
#683=LINE('',#682,#681);
#684=DIRECTION('',(1.E0,-2.634929311777E-11,8.274862276873E-13));
#685=VECTOR('',#684,1.2E0);
#686=CARTESIAN_POINT('',(1.1E1,2.311740534791E1,1.35E1));
#687=LINE('',#686,#685);
#688=CARTESIAN_POINT('',(-8.E0,7.2E0,1.4E1));
#689=CARTESIAN_POINT('',(-8.333415540015E0,7.2E0,1.4E1));
#690=CARTESIAN_POINT('',(-8.855432776832E0,7.2E0,1.385518615679E1));
#691=CARTESIAN_POINT('',(-9.443774130941E0,7.2E0,1.344328089085E1));
#692=CARTESIAN_POINT('',(-9.855364820593E0,7.2E0,1.285462496046E1));
#693=CARTESIAN_POINT('',(-1.E1,7.2E0,1.233242905983E1));
#694=CARTESIAN_POINT('',(-1.E1,7.2E0,1.199901351982E1));
#696=CARTESIAN_POINT('',(1.22E1,2.305461201060E1,1.150098599385E1));
#697=DIRECTION('',(0.E0,-9.995070030757E-1,3.139666865389E-2));
#698=DIRECTION('',(1.E0,0.E0,0.E0));
#699=AXIS2_PLACEMENT_3D('',#696,#697,#698);
#701=CARTESIAN_POINT('',(1.42E1,7.2E0,1.199901351982E1));
#702=CARTESIAN_POINT('',(1.42E1,7.2E0,1.233242905983E1));
#703=CARTESIAN_POINT('',(1.405536482059E1,7.2E0,1.285462496046E1));
#704=CARTESIAN_POINT('',(1.364377413094E1,7.2E0,1.344328089085E1));
#705=CARTESIAN_POINT('',(1.305543277683E1,7.2E0,1.385518615679E1));
#706=CARTESIAN_POINT('',(1.253341554002E1,7.2E0,1.4E1));
#707=CARTESIAN_POINT('',(1.22E1,7.2E0,1.4E1));
#709=CARTESIAN_POINT('',(1.22E1,2.305461201060E1,-1.150098599385E1));
#710=DIRECTION('',(0.E0,9.995070030757E-1,3.139666865389E-2));
#711=DIRECTION('',(1.E0,0.E0,0.E0));
#712=AXIS2_PLACEMENT_3D('',#709,#710,#711);
#714=CARTESIAN_POINT('',(1.42E1,2.25E1,0.E0));
#715=DIRECTION('',(1.E0,0.E0,0.E0));
#716=DIRECTION('',(0.E0,0.E0,-1.E0));
#717=AXIS2_PLACEMENT_3D('',#714,#715,#716);
#719=CARTESIAN_POINT('',(1.42E1,2.25E1,0.E0));
#720=DIRECTION('',(1.E0,0.E0,0.E0));
#721=DIRECTION('',(0.E0,0.E0,1.E0));
#722=AXIS2_PLACEMENT_3D('',#719,#720,#721);
#724=DIRECTION('',(0.E0,-9.995070030757E-1,3.139666865388E-2));
#725=VECTOR('',#724,1.586243214086E1);
#726=CARTESIAN_POINT('',(1.42E1,2.305461201060E1,1.150098599385E1));
#727=LINE('',#726,#725);
#728=CARTESIAN_POINT('',(1.42E1,2.269334125879E1,0.E0));
#729=DIRECTION('',(1.E0,0.E0,0.E0));
#730=DIRECTION('',(0.E0,3.139666865389E-2,-9.995070030757E-1));
#731=AXIS2_PLACEMENT_3D('',#728,#729,#730);
#733=DIRECTION('',(0.E0,9.995070030757E-1,3.139666865388E-2));
#734=VECTOR('',#733,1.586243214086E1);
#735=CARTESIAN_POINT('',(1.42E1,7.2E0,-1.199901351982E1));
#736=LINE('',#735,#734);
#737=DIRECTION('',(-1.E0,0.E0,0.E0));
#738=VECTOR('',#737,1.3E0);
#739=CARTESIAN_POINT('',(1.42E1,2.25E1,-8.E0));
#740=LINE('',#739,#738);
#741=DIRECTION('',(-1.E0,0.E0,0.E0));
#742=VECTOR('',#741,1.3E0);
#743=CARTESIAN_POINT('',(1.42E1,2.25E1,8.E0));
#744=LINE('',#743,#742);
#745=CARTESIAN_POINT('',(1.29E1,2.25E1,0.E0));
#746=DIRECTION('',(1.E0,0.E0,0.E0));
#747=DIRECTION('',(0.E0,0.E0,-1.E0));
#748=AXIS2_PLACEMENT_3D('',#745,#746,#747);
#750=CARTESIAN_POINT('',(1.29E1,2.25E1,0.E0));
#751=DIRECTION('',(1.E0,0.E0,0.E0));
#752=DIRECTION('',(0.E0,0.E0,1.E0));
#753=AXIS2_PLACEMENT_3D('',#750,#751,#752);
#755=CARTESIAN_POINT('',(1.29E1,2.25E1,0.E0));
#756=DIRECTION('',(1.E0,0.E0,0.E0));
#757=DIRECTION('',(0.E0,0.E0,-1.E0));
#758=AXIS2_PLACEMENT_3D('',#755,#756,#757);
#760=DIRECTION('',(-1.E0,0.E0,0.E0));
#761=VECTOR('',#760,1.9E0);
#762=CARTESIAN_POINT('',(1.29E1,2.25E1,-5.6E0));
#763=LINE('',#762,#761);
#764=CARTESIAN_POINT('',(1.29E1,2.25E1,0.E0));
#765=DIRECTION('',(1.E0,0.E0,0.E0));
#766=DIRECTION('',(0.E0,0.E0,1.E0));
#767=AXIS2_PLACEMENT_3D('',#764,#765,#766);
#769=DIRECTION('',(-1.E0,0.E0,0.E0));
#770=VECTOR('',#769,1.9E0);
#771=CARTESIAN_POINT('',(1.29E1,2.25E1,5.6E0));
#772=LINE('',#771,#770);
#773=CARTESIAN_POINT('',(1.1E1,2.25E1,0.E0));
#774=DIRECTION('',(1.E0,0.E0,0.E0));
#775=DIRECTION('',(0.E0,0.E0,-1.E0));
#776=AXIS2_PLACEMENT_3D('',#773,#774,#775);
#778=CARTESIAN_POINT('',(1.1E1,2.25E1,0.E0));
#779=DIRECTION('',(1.E0,0.E0,0.E0));
#780=DIRECTION('',(0.E0,0.E0,1.E0));
#781=AXIS2_PLACEMENT_3D('',#778,#779,#780);
#783=CARTESIAN_POINT('',(1.22E1,7.2E0,-1.4E1));
#784=CARTESIAN_POINT('',(1.253341554002E1,7.2E0,-1.4E1));
#785=CARTESIAN_POINT('',(1.305543277683E1,7.2E0,-1.385518615679E1));
#786=CARTESIAN_POINT('',(1.364377413094E1,7.2E0,-1.344328089085E1));
#787=CARTESIAN_POINT('',(1.405536482059E1,7.2E0,-1.285462496046E1));
#788=CARTESIAN_POINT('',(1.42E1,7.2E0,-1.233242905983E1));
#789=CARTESIAN_POINT('',(1.42E1,7.2E0,-1.199901351982E1));
#791=DIRECTION('',(1.E0,0.E0,0.E0));
#792=VECTOR('',#791,5.1E0);
#793=CARTESIAN_POINT('',(-1.19E1,2.46E1,0.E0));
#794=LINE('',#793,#792);
#795=DIRECTION('',(1.E0,0.E0,0.E0));
#796=VECTOR('',#795,5.1E0);
#797=CARTESIAN_POINT('',(-1.19E1,2.04E1,0.E0));
#798=LINE('',#797,#796);
#799=CARTESIAN_POINT('',(-6.8E0,2.311740534791E1,-1.35E1));
#800=CARTESIAN_POINT('',(-6.8E0,2.311740534791E1,1.35E1));
#801=VERTEX_POINT('',#799);
#802=VERTEX_POINT('',#800);
#803=CARTESIAN_POINT('',(1.1E1,2.311740534791E1,1.35E1));
#804=CARTESIAN_POINT('',(1.1E1,2.311740534791E1,-1.35E1));
#805=VERTEX_POINT('',#803);
#806=VERTEX_POINT('',#804);
#807=CARTESIAN_POINT('',(-6.8E0,7.2E0,1.4E1));
#808=VERTEX_POINT('',#807);
#809=CARTESIAN_POINT('',(1.1E1,7.2E0,1.4E1));
#810=VERTEX_POINT('',#809);
#811=CARTESIAN_POINT('',(-6.8E0,7.2E0,-1.4E1));
#812=VERTEX_POINT('',#811);
#813=CARTESIAN_POINT('',(1.1E1,7.2E0,-1.4E1));
#814=VERTEX_POINT('',#813);
#815=CARTESIAN_POINT('',(-1.5E1,-2.6E0,4.E0));
#816=CARTESIAN_POINT('',(-1.5E1,-2.6E0,-4.E0));
#817=VERTEX_POINT('',#815);
#818=VERTEX_POINT('',#816);
#819=CARTESIAN_POINT('',(-1.4E1,-2.6E0,-4.E0));
#820=VERTEX_POINT('',#819);
#821=CARTESIAN_POINT('',(-1.4E1,-2.6E0,4.E0));
#822=VERTEX_POINT('',#821);
#823=CARTESIAN_POINT('',(-4.E0,-2.6E0,-1.5E1));
#824=CARTESIAN_POINT('',(4.E0,-2.6E0,-1.5E1));
#825=VERTEX_POINT('',#823);
#826=VERTEX_POINT('',#824);
#827=CARTESIAN_POINT('',(4.E0,-2.6E0,-1.4E1));
#828=VERTEX_POINT('',#827);
#829=CARTESIAN_POINT('',(-4.E0,-2.6E0,-1.4E1));
#830=VERTEX_POINT('',#829);
#831=CARTESIAN_POINT('',(-4.E0,-2.6E0,1.5E1));
#832=CARTESIAN_POINT('',(-4.E0,-2.6E0,1.4E1));
#833=VERTEX_POINT('',#831);
#834=VERTEX_POINT('',#832);
#835=CARTESIAN_POINT('',(4.E0,-2.6E0,1.4E1));
#836=VERTEX_POINT('',#835);
#837=CARTESIAN_POINT('',(4.E0,-2.6E0,1.5E1));
#838=VERTEX_POINT('',#837);
#839=CARTESIAN_POINT('',(1.5E1,-2.6E0,4.E0));
#840=CARTESIAN_POINT('',(1.4E1,-2.6E0,4.E0));
#841=VERTEX_POINT('',#839);
#842=VERTEX_POINT('',#840);
#843=CARTESIAN_POINT('',(1.4E1,-2.6E0,-4.E0));
#844=VERTEX_POINT('',#843);
#845=CARTESIAN_POINT('',(1.5E1,-2.6E0,-4.E0));
#846=VERTEX_POINT('',#845);
#847=CARTESIAN_POINT('',(-1.5E1,0.E0,-4.E0));
#848=CARTESIAN_POINT('',(-1.4E1,0.E0,-4.E0));
#849=VERTEX_POINT('',#847);
#850=VERTEX_POINT('',#848);
#851=CARTESIAN_POINT('',(-1.4E1,0.E0,4.E0));
#852=VERTEX_POINT('',#851);
#853=CARTESIAN_POINT('',(-1.5E1,0.E0,4.E0));
#854=VERTEX_POINT('',#853);
#855=CARTESIAN_POINT('',(4.E0,0.E0,-1.5E1));
#856=CARTESIAN_POINT('',(4.E0,0.E0,-1.4E1));
#857=VERTEX_POINT('',#855);
#858=VERTEX_POINT('',#856);
#859=CARTESIAN_POINT('',(-4.E0,0.E0,-1.4E1));
#860=VERTEX_POINT('',#859);
#861=CARTESIAN_POINT('',(-4.E0,0.E0,-1.5E1));
#862=VERTEX_POINT('',#861);
#863=CARTESIAN_POINT('',(-4.E0,0.E0,1.5E1));
#864=CARTESIAN_POINT('',(-4.E0,0.E0,1.4E1));
#865=VERTEX_POINT('',#863);
#866=VERTEX_POINT('',#864);
#867=CARTESIAN_POINT('',(4.E0,0.E0,1.4E1));
#868=VERTEX_POINT('',#867);
#869=CARTESIAN_POINT('',(4.E0,0.E0,1.5E1));
#870=VERTEX_POINT('',#869);
#871=CARTESIAN_POINT('',(1.5E1,0.E0,4.E0));
#872=CARTESIAN_POINT('',(1.4E1,0.E0,4.E0));
#873=VERTEX_POINT('',#871);
#874=VERTEX_POINT('',#872);
#875=CARTESIAN_POINT('',(1.4E1,0.E0,-4.E0));
#876=VERTEX_POINT('',#875);
#877=CARTESIAN_POINT('',(1.5E1,0.E0,-4.E0));
#878=VERTEX_POINT('',#877);
#879=CARTESIAN_POINT('',(0.E0,0.E0,-4.15E0));
#880=CARTESIAN_POINT('',(0.E0,0.E0,4.15E0));
#881=VERTEX_POINT('',#879);
#882=VERTEX_POINT('',#880);
#883=CARTESIAN_POINT('',(0.E0,7.2E0,-4.15E0));
#884=CARTESIAN_POINT('',(0.E0,7.2E0,4.15E0));
#885=VERTEX_POINT('',#883);
#886=VERTEX_POINT('',#884);
#887=CARTESIAN_POINT('',(1.1E1,2.25E1,-5.6E0));
#888=CARTESIAN_POINT('',(1.1E1,2.25E1,5.6E0));
#889=VERTEX_POINT('',#887);
#890=VERTEX_POINT('',#888);
#891=CARTESIAN_POINT('',(1.29E1,2.25E1,-8.E0));
#892=CARTESIAN_POINT('',(1.29E1,2.25E1,8.E0));
#893=VERTEX_POINT('',#891);
#894=VERTEX_POINT('',#892);
#895=CARTESIAN_POINT('',(1.42E1,2.25E1,-8.E0));
#896=CARTESIAN_POINT('',(1.42E1,2.25E1,8.E0));
#897=VERTEX_POINT('',#895);
#898=VERTEX_POINT('',#896);
#899=CARTESIAN_POINT('',(1.29E1,2.25E1,-5.6E0));
#900=CARTESIAN_POINT('',(1.29E1,2.25E1,5.6E0));
#901=VERTEX_POINT('',#899);
#902=VERTEX_POINT('',#900);
#903=CARTESIAN_POINT('',(-9.5E0,2.25E1,1.1E1));
#904=CARTESIAN_POINT('',(-9.5E0,2.25E1,-1.1E1));
#905=VERTEX_POINT('',#903);
#906=VERTEX_POINT('',#904);
#907=CARTESIAN_POINT('',(-9.5E0,2.25E1,7.E0));
#908=CARTESIAN_POINT('',(-9.5E0,2.25E1,-7.E0));
#909=VERTEX_POINT('',#907);
#910=VERTEX_POINT('',#908);
#911=CARTESIAN_POINT('',(-1.E1,2.25E1,1.1E1));
#912=CARTESIAN_POINT('',(-1.E1,2.25E1,-1.1E1));
#913=VERTEX_POINT('',#911);
#914=VERTEX_POINT('',#912);
#915=CARTESIAN_POINT('',(-1.E1,2.25E1,-7.E0));
#916=CARTESIAN_POINT('',(-1.E1,2.25E1,7.E0));
#917=VERTEX_POINT('',#915);
#918=VERTEX_POINT('',#916);
#919=CARTESIAN_POINT('',(-1.19E1,1.71E1,-1.E0));
#920=CARTESIAN_POINT('',(-1.19E1,1.71E1,1.E0));
#921=VERTEX_POINT('',#919);
#922=VERTEX_POINT('',#920);
#923=CARTESIAN_POINT('',(-1.19E1,2.79E1,1.E0));
#924=CARTESIAN_POINT('',(-1.19E1,2.79E1,-1.E0));
#925=VERTEX_POINT('',#923);
#926=VERTEX_POINT('',#924);
#927=CARTESIAN_POINT('',(-1.E1,2.79E1,-1.E0));
#928=CARTESIAN_POINT('',(-1.E1,2.606230262611E1,-1.E0));
#929=VERTEX_POINT('',#927);
#930=VERTEX_POINT('',#928);
#931=CARTESIAN_POINT('',(-1.E1,1.893769737389E1,-1.E0));
#932=CARTESIAN_POINT('',(-1.E1,1.71E1,-1.E0));
#933=VERTEX_POINT('',#931);
#934=VERTEX_POINT('',#932);
#935=CARTESIAN_POINT('',(-1.E1,1.71E1,1.E0));
#936=VERTEX_POINT('',#935);
#937=CARTESIAN_POINT('',(-1.E1,1.893769737389E1,1.E0));
#938=VERTEX_POINT('',#937);
#939=CARTESIAN_POINT('',(-1.E1,2.606230262611E1,1.E0));
#940=CARTESIAN_POINT('',(-1.E1,2.79E1,1.E0));
#941=VERTEX_POINT('',#939);
#942=VERTEX_POINT('',#940);
#943=CARTESIAN_POINT('',(-1.19E1,2.606230262611E1,-1.E0));
#944=VERTEX_POINT('',#943);
#945=CARTESIAN_POINT('',(-1.19E1,2.606230262611E1,1.E0));
#946=VERTEX_POINT('',#945);
#947=CARTESIAN_POINT('',(-1.19E1,1.893769737389E1,-1.E0));
#948=VERTEX_POINT('',#947);
#949=CARTESIAN_POINT('',(-1.19E1,1.893769737389E1,1.E0));
#950=VERTEX_POINT('',#949);
#951=CARTESIAN_POINT('',(-7.3E0,3.15E1,1.2E0));
#952=CARTESIAN_POINT('',(-7.3E0,3.15E1,-1.2E0));
#953=VERTEX_POINT('',#951);
#954=VERTEX_POINT('',#952);
#955=CARTESIAN_POINT('',(-7.3E0,1.35E1,1.2E0));
#956=CARTESIAN_POINT('',(-7.3E0,1.35E1,-1.2E0));
#957=VERTEX_POINT('',#955);
#958=VERTEX_POINT('',#956);
#959=CARTESIAN_POINT('',(-9.5E0,3.15E1,1.2E0));
#960=CARTESIAN_POINT('',(-9.5E0,3.15E1,-1.2E0));
#961=VERTEX_POINT('',#959);
#962=VERTEX_POINT('',#960);
#963=CARTESIAN_POINT('',(-9.5E0,1.35E1,1.2E0));
#964=CARTESIAN_POINT('',(-9.5E0,1.35E1,-1.2E0));
#965=VERTEX_POINT('',#963);
#966=VERTEX_POINT('',#964);
#967=CARTESIAN_POINT('',(-6.8E0,2.04E1,0.E0));
#968=CARTESIAN_POINT('',(-6.8E0,2.46E1,0.E0));
#969=VERTEX_POINT('',#967);
#970=VERTEX_POINT('',#968);
#971=CARTESIAN_POINT('',(-1.19E1,2.04E1,0.E0));
#972=CARTESIAN_POINT('',(-1.19E1,2.46E1,0.E0));
#973=VERTEX_POINT('',#971);
#974=VERTEX_POINT('',#972);
#975=CARTESIAN_POINT('',(-1.35E1,0.E0,1.5E1));
#976=CARTESIAN_POINT('',(-1.5E1,0.E0,1.35E1));
#977=VERTEX_POINT('',#975);
#978=VERTEX_POINT('',#976);
#979=CARTESIAN_POINT('',(-1.5E1,7.2E0,1.35E1));
#980=VERTEX_POINT('',#979);
#981=CARTESIAN_POINT('',(-1.35E1,7.2E0,1.5E1));
#982=VERTEX_POINT('',#981);
#983=CARTESIAN_POINT('',(1.5E1,0.E0,1.35E1));
#984=CARTESIAN_POINT('',(1.35E1,0.E0,1.5E1));
#985=VERTEX_POINT('',#983);
#986=VERTEX_POINT('',#984);
#987=CARTESIAN_POINT('',(1.35E1,7.2E0,1.5E1));
#988=VERTEX_POINT('',#987);
#989=CARTESIAN_POINT('',(1.5E1,7.2E0,1.35E1));
#990=VERTEX_POINT('',#989);
#991=CARTESIAN_POINT('',(-1.5E1,0.E0,-1.35E1));
#992=CARTESIAN_POINT('',(-1.35E1,0.E0,-1.5E1));
#993=VERTEX_POINT('',#991);
#994=VERTEX_POINT('',#992);
#995=CARTESIAN_POINT('',(-1.35E1,7.2E0,-1.5E1));
#996=VERTEX_POINT('',#995);
#997=CARTESIAN_POINT('',(-1.5E1,7.2E0,-1.35E1));
#998=VERTEX_POINT('',#997);
#999=CARTESIAN_POINT('',(1.35E1,0.E0,-1.5E1));
#1000=CARTESIAN_POINT('',(1.5E1,0.E0,-1.35E1));
#1001=VERTEX_POINT('',#999);
#1002=VERTEX_POINT('',#1000);
#1003=CARTESIAN_POINT('',(1.5E1,7.2E0,-1.35E1));
#1004=VERTEX_POINT('',#1003);
#1005=CARTESIAN_POINT('',(1.35E1,7.2E0,-1.5E1));
#1006=VERTEX_POINT('',#1005);
#1007=CARTESIAN_POINT('',(-8.E0,2.311740534789E1,-1.35E1));
#1008=CARTESIAN_POINT('',(-8.E0,7.2E0,-1.4E1));
#1009=VERTEX_POINT('',#1007);
#1010=VERTEX_POINT('',#1008);
#1011=CARTESIAN_POINT('',(-1.E1,2.305461201060E1,-1.150098599385E1));
#1012=CARTESIAN_POINT('',(-1.E1,7.2E0,-1.199901351982E1));
#1013=VERTEX_POINT('',#1011);
#1014=VERTEX_POINT('',#1012);
#1015=CARTESIAN_POINT('',(-1.E1,2.305461200952E1,1.150098595929E1));
#1016=VERTEX_POINT('',#1015);
#1017=CARTESIAN_POINT('',(-8.E0,2.311740534791E1,1.35E1));
#1018=VERTEX_POINT('',#1017);
#1019=CARTESIAN_POINT('',(-1.E1,7.2E0,1.199901351982E1));
#1020=VERTEX_POINT('',#1019);
#1021=CARTESIAN_POINT('',(-8.E0,7.2E0,1.4E1));
#1022=VERTEX_POINT('',#1021);
#1023=CARTESIAN_POINT('',(1.22E1,2.311740534788E1,1.35E1));
#1024=CARTESIAN_POINT('',(1.22E1,7.2E0,1.4E1));
#1025=VERTEX_POINT('',#1023);
#1026=VERTEX_POINT('',#1024);
#1027=CARTESIAN_POINT('',(1.42E1,2.305461201060E1,1.150098599385E1));
#1028=CARTESIAN_POINT('',(1.42E1,7.2E0,1.199901351982E1));
#1029=VERTEX_POINT('',#1027);
#1030=VERTEX_POINT('',#1028);
#1031=CARTESIAN_POINT('',(1.42E1,2.305461200952E1,-1.150098595928E1));
#1032=VERTEX_POINT('',#1031);
#1033=CARTESIAN_POINT('',(1.22E1,2.311740534791E1,-1.35E1));
#1034=VERTEX_POINT('',#1033);
#1035=CARTESIAN_POINT('',(1.42E1,7.2E0,-1.199901351982E1));
#1036=VERTEX_POINT('',#1035);
#1037=CARTESIAN_POINT('',(1.22E1,7.2E0,-1.4E1));
#1038=VERTEX_POINT('',#1037);
#1039=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#1040=DIRECTION('',(0.E0,1.E0,0.E0));
#1041=DIRECTION('',(1.E0,0.E0,0.E0));
#1042=AXIS2_PLACEMENT_3D('',#1039,#1040,#1041);
#1043=PLANE('',#1042);
#1045=ORIENTED_EDGE('',*,*,#1044,.F.);
#1047=ORIENTED_EDGE('',*,*,#1046,.T.);
#1049=ORIENTED_EDGE('',*,*,#1048,.T.);
#1051=ORIENTED_EDGE('',*,*,#1050,.T.);
#1053=ORIENTED_EDGE('',*,*,#1052,.F.);
#1055=ORIENTED_EDGE('',*,*,#1054,.T.);
#1057=ORIENTED_EDGE('',*,*,#1056,.F.);
#1059=ORIENTED_EDGE('',*,*,#1058,.T.);
#1061=ORIENTED_EDGE('',*,*,#1060,.T.);
#1063=ORIENTED_EDGE('',*,*,#1062,.T.);
#1065=ORIENTED_EDGE('',*,*,#1064,.F.);
#1067=ORIENTED_EDGE('',*,*,#1066,.T.);
#1069=ORIENTED_EDGE('',*,*,#1068,.F.);
#1071=ORIENTED_EDGE('',*,*,#1070,.T.);
#1073=ORIENTED_EDGE('',*,*,#1072,.T.);
#1075=ORIENTED_EDGE('',*,*,#1074,.T.);
#1077=ORIENTED_EDGE('',*,*,#1076,.F.);
#1079=ORIENTED_EDGE('',*,*,#1078,.T.);
#1081=ORIENTED_EDGE('',*,*,#1080,.F.);
#1083=ORIENTED_EDGE('',*,*,#1082,.T.);
#1085=ORIENTED_EDGE('',*,*,#1084,.T.);
#1087=ORIENTED_EDGE('',*,*,#1086,.T.);
#1089=ORIENTED_EDGE('',*,*,#1088,.F.);
#1091=ORIENTED_EDGE('',*,*,#1090,.T.);
#1092=EDGE_LOOP('',(#1045,#1047,#1049,#1051,#1053,#1055,#1057,#1059,#1061,#1063,
#1065,#1067,#1069,#1071,#1073,#1075,#1077,#1079,#1081,#1083,#1085,#1087,#1089,
#1091));
#1093=FACE_OUTER_BOUND('',#1092,.F.);
#1095=ORIENTED_EDGE('',*,*,#1094,.F.);
#1097=ORIENTED_EDGE('',*,*,#1096,.F.);
#1098=EDGE_LOOP('',(#1095,#1097));
#1099=FACE_BOUND('',#1098,.F.);
#1100=ADVANCED_FACE('',(#1093,#1099),#1043,.F.);
#1101=CARTESIAN_POINT('',(0.E0,7.2E0,0.E0));
#1102=DIRECTION('',(0.E0,1.E0,0.E0));
#1103=DIRECTION('',(0.E0,0.E0,-1.E0));
#1104=AXIS2_PLACEMENT_3D('',#1101,#1102,#1103);
#1105=CYLINDRICAL_SURFACE('',#1104,4.15E0);
#1106=ORIENTED_EDGE('',*,*,#1094,.T.);
#1108=ORIENTED_EDGE('',*,*,#1107,.F.);
#1110=ORIENTED_EDGE('',*,*,#1109,.F.);
#1112=ORIENTED_EDGE('',*,*,#1111,.T.);
#1113=EDGE_LOOP('',(#1106,#1108,#1110,#1112));
#1114=FACE_OUTER_BOUND('',#1113,.F.);
#1115=ADVANCED_FACE('',(#1114),#1105,.F.);
#1116=CARTESIAN_POINT('',(0.E0,7.2E0,0.E0));
#1117=DIRECTION('',(0.E0,1.E0,0.E0));
#1118=DIRECTION('',(0.E0,0.E0,-1.E0));
#1119=AXIS2_PLACEMENT_3D('',#1116,#1117,#1118);
#1120=CYLINDRICAL_SURFACE('',#1119,4.15E0);
#1121=ORIENTED_EDGE('',*,*,#1096,.T.);
#1122=ORIENTED_EDGE('',*,*,#1111,.F.);
#1124=ORIENTED_EDGE('',*,*,#1123,.F.);
#1125=ORIENTED_EDGE('',*,*,#1107,.T.);
#1126=EDGE_LOOP('',(#1121,#1122,#1124,#1125));
#1127=FACE_OUTER_BOUND('',#1126,.F.);
#1128=ADVANCED_FACE('',(#1127),#1120,.F.);
#1129=CARTESIAN_POINT('',(0.E0,7.2E0,0.E0));
#1130=DIRECTION('',(0.E0,1.E0,0.E0));
#1131=DIRECTION('',(1.E0,0.E0,0.E0));
#1132=AXIS2_PLACEMENT_3D('',#1129,#1130,#1131);
#1133=PLANE('',#1132);
#1135=ORIENTED_EDGE('',*,*,#1134,.F.);
#1137=ORIENTED_EDGE('',*,*,#1136,.F.);
#1139=ORIENTED_EDGE('',*,*,#1138,.F.);
#1141=ORIENTED_EDGE('',*,*,#1140,.F.);
#1143=ORIENTED_EDGE('',*,*,#1142,.F.);
#1145=ORIENTED_EDGE('',*,*,#1144,.F.);
#1147=ORIENTED_EDGE('',*,*,#1146,.F.);
#1149=ORIENTED_EDGE('',*,*,#1148,.F.);
#1150=EDGE_LOOP('',(#1135,#1137,#1139,#1141,#1143,#1145,#1147,#1149));
#1151=FACE_OUTER_BOUND('',#1150,.F.);
#1152=ORIENTED_EDGE('',*,*,#1109,.T.);
#1153=ORIENTED_EDGE('',*,*,#1123,.T.);
#1154=EDGE_LOOP('',(#1152,#1153));
#1155=FACE_BOUND('',#1154,.F.);
#1157=ORIENTED_EDGE('',*,*,#1156,.F.);
#1159=ORIENTED_EDGE('',*,*,#1158,.F.);
#1161=ORIENTED_EDGE('',*,*,#1160,.F.);
#1163=ORIENTED_EDGE('',*,*,#1162,.F.);
#1165=ORIENTED_EDGE('',*,*,#1164,.T.);
#1167=ORIENTED_EDGE('',*,*,#1166,.F.);
#1168=EDGE_LOOP('',(#1157,#1159,#1161,#1163,#1165,#1167));
#1169=FACE_BOUND('',#1168,.F.);
#1171=ORIENTED_EDGE('',*,*,#1170,.T.);
#1173=ORIENTED_EDGE('',*,*,#1172,.F.);
#1175=ORIENTED_EDGE('',*,*,#1174,.F.);
#1177=ORIENTED_EDGE('',*,*,#1176,.T.);
#1179=ORIENTED_EDGE('',*,*,#1178,.T.);
#1181=ORIENTED_EDGE('',*,*,#1180,.F.);
#1182=EDGE_LOOP('',(#1171,#1173,#1175,#1177,#1179,#1181));
#1183=FACE_BOUND('',#1182,.F.);
#1184=ADVANCED_FACE('',(#1151,#1155,#1169,#1183),#1133,.T.);
#1185=CARTESIAN_POINT('',(-1.35E1,7.289972671074E0,1.35E1));
#1186=DIRECTION('',(0.E0,-1.E0,0.E0));
#1187=DIRECTION('',(0.E0,0.E0,1.E0));
#1188=AXIS2_PLACEMENT_3D('',#1185,#1186,#1187);
#1189=CYLINDRICAL_SURFACE('',#1188,1.5E0);
#1190=ORIENTED_EDGE('',*,*,#1044,.T.);
#1192=ORIENTED_EDGE('',*,*,#1191,.F.);
#1193=ORIENTED_EDGE('',*,*,#1134,.T.);
#1195=ORIENTED_EDGE('',*,*,#1194,.T.);
#1196=EDGE_LOOP('',(#1190,#1192,#1193,#1195));
#1197=FACE_OUTER_BOUND('',#1196,.F.);
#1198=ADVANCED_FACE('',(#1197),#1189,.T.);
#1199=CARTESIAN_POINT('',(-1.5E1,0.E0,-1.5E1));
#1200=DIRECTION('',(-1.E0,0.E0,0.E0));
#1201=DIRECTION('',(0.E0,0.E0,1.E0));
#1202=AXIS2_PLACEMENT_3D('',#1199,#1200,#1201);
#1203=PLANE('',#1202);
#1204=ORIENTED_EDGE('',*,*,#1191,.T.);
#1205=ORIENTED_EDGE('',*,*,#1090,.F.);
#1207=ORIENTED_EDGE('',*,*,#1206,.T.);
#1209=ORIENTED_EDGE('',*,*,#1208,.T.);
#1211=ORIENTED_EDGE('',*,*,#1210,.F.);
#1212=ORIENTED_EDGE('',*,*,#1082,.F.);
#1214=ORIENTED_EDGE('',*,*,#1213,.F.);
#1215=ORIENTED_EDGE('',*,*,#1136,.T.);
#1216=EDGE_LOOP('',(#1204,#1205,#1207,#1209,#1211,#1212,#1214,#1215));
#1217=FACE_OUTER_BOUND('',#1216,.F.);
#1218=ADVANCED_FACE('',(#1217),#1203,.T.);
#1219=CARTESIAN_POINT('',(-1.4E1,0.E0,4.E0));
#1220=DIRECTION('',(0.E0,0.E0,1.E0));
#1221=DIRECTION('',(-1.E0,0.E0,0.E0));
#1222=AXIS2_PLACEMENT_3D('',#1219,#1220,#1221);
#1223=PLANE('',#1222);
#1224=ORIENTED_EDGE('',*,*,#1088,.T.);
#1226=ORIENTED_EDGE('',*,*,#1225,.T.);
#1228=ORIENTED_EDGE('',*,*,#1227,.T.);
#1229=ORIENTED_EDGE('',*,*,#1206,.F.);
#1230=EDGE_LOOP('',(#1224,#1226,#1228,#1229));
#1231=FACE_OUTER_BOUND('',#1230,.F.);
#1232=ADVANCED_FACE('',(#1231),#1223,.T.);
#1233=CARTESIAN_POINT('',(-1.4E1,0.E0,-4.E0));
#1234=DIRECTION('',(1.E0,0.E0,0.E0));
#1235=DIRECTION('',(0.E0,0.E0,1.E0));
#1236=AXIS2_PLACEMENT_3D('',#1233,#1234,#1235);
#1237=PLANE('',#1236);
#1238=ORIENTED_EDGE('',*,*,#1086,.F.);
#1240=ORIENTED_EDGE('',*,*,#1239,.T.);
#1242=ORIENTED_EDGE('',*,*,#1241,.T.);
#1243=ORIENTED_EDGE('',*,*,#1225,.F.);
#1244=EDGE_LOOP('',(#1238,#1240,#1242,#1243));
#1245=FACE_OUTER_BOUND('',#1244,.F.);
#1246=ADVANCED_FACE('',(#1245),#1237,.T.);
#1247=CARTESIAN_POINT('',(-1.5E1,0.E0,-4.E0));
#1248=DIRECTION('',(0.E0,0.E0,-1.E0));
#1249=DIRECTION('',(1.E0,0.E0,0.E0));
#1250=AXIS2_PLACEMENT_3D('',#1247,#1248,#1249);
#1251=PLANE('',#1250);
#1252=ORIENTED_EDGE('',*,*,#1084,.F.);
#1253=ORIENTED_EDGE('',*,*,#1210,.T.);
#1255=ORIENTED_EDGE('',*,*,#1254,.T.);
#1256=ORIENTED_EDGE('',*,*,#1239,.F.);
#1257=EDGE_LOOP('',(#1252,#1253,#1255,#1256));
#1258=FACE_OUTER_BOUND('',#1257,.F.);
#1259=ADVANCED_FACE('',(#1258),#1251,.T.);
#1260=CARTESIAN_POINT('',(0.E0,-2.6E0,0.E0));
#1261=DIRECTION('',(0.E0,-1.E0,0.E0));
#1262=DIRECTION('',(1.E0,0.E0,0.E0));
#1263=AXIS2_PLACEMENT_3D('',#1260,#1261,#1262);
#1264=PLANE('',#1263);
#1265=ORIENTED_EDGE('',*,*,#1208,.F.);
#1266=ORIENTED_EDGE('',*,*,#1227,.F.);
#1267=ORIENTED_EDGE('',*,*,#1241,.F.);
#1268=ORIENTED_EDGE('',*,*,#1254,.F.);
#1269=EDGE_LOOP('',(#1265,#1266,#1267,#1268));
#1270=FACE_OUTER_BOUND('',#1269,.F.);
#1271=ADVANCED_FACE('',(#1270),#1264,.T.);
#1272=CARTESIAN_POINT('',(0.E0,-2.6E0,0.E0));
#1273=DIRECTION('',(0.E0,-1.E0,0.E0));
#1274=DIRECTION('',(1.E0,0.E0,0.E0));
#1275=AXIS2_PLACEMENT_3D('',#1272,#1273,#1274);
#1276=PLANE('',#1275);
#1278=ORIENTED_EDGE('',*,*,#1277,.F.);
#1280=ORIENTED_EDGE('',*,*,#1279,.F.);
#1282=ORIENTED_EDGE('',*,*,#1281,.F.);
#1284=ORIENTED_EDGE('',*,*,#1283,.F.);
#1285=EDGE_LOOP('',(#1278,#1280,#1282,#1284));
#1286=FACE_OUTER_BOUND('',#1285,.F.);
#1287=ADVANCED_FACE('',(#1286),#1276,.T.);
#1288=CARTESIAN_POINT('',(0.E0,-2.6E0,0.E0));
#1289=DIRECTION('',(0.E0,-1.E0,0.E0));
#1290=DIRECTION('',(1.E0,0.E0,0.E0));
#1291=AXIS2_PLACEMENT_3D('',#1288,#1289,#1290);
#1292=PLANE('',#1291);
#1294=ORIENTED_EDGE('',*,*,#1293,.F.);
#1296=ORIENTED_EDGE('',*,*,#1295,.F.);
#1298=ORIENTED_EDGE('',*,*,#1297,.F.);
#1300=ORIENTED_EDGE('',*,*,#1299,.F.);
#1301=EDGE_LOOP('',(#1294,#1296,#1298,#1300));
#1302=FACE_OUTER_BOUND('',#1301,.F.);
#1303=ADVANCED_FACE('',(#1302),#1292,.T.);
#1304=CARTESIAN_POINT('',(0.E0,-2.6E0,0.E0));
#1305=DIRECTION('',(0.E0,-1.E0,0.E0));
#1306=DIRECTION('',(1.E0,0.E0,0.E0));
#1307=AXIS2_PLACEMENT_3D('',#1304,#1305,#1306);
#1308=PLANE('',#1307);
#1310=ORIENTED_EDGE('',*,*,#1309,.F.);
#1312=ORIENTED_EDGE('',*,*,#1311,.F.);
#1314=ORIENTED_EDGE('',*,*,#1313,.F.);
#1316=ORIENTED_EDGE('',*,*,#1315,.F.);
#1317=EDGE_LOOP('',(#1310,#1312,#1314,#1316));
#1318=FACE_OUTER_BOUND('',#1317,.F.);
#1319=ADVANCED_FACE('',(#1318),#1308,.T.);
#1320=CARTESIAN_POINT('',(1.5E1,0.E0,-1.5E1));
#1321=DIRECTION('',(0.E0,0.E0,-1.E0));
#1322=DIRECTION('',(-1.E0,0.E0,0.E0));
#1323=AXIS2_PLACEMENT_3D('',#1320,#1321,#1322);
#1324=PLANE('',#1323);
#1326=ORIENTED_EDGE('',*,*,#1325,.T.);
#1327=ORIENTED_EDGE('',*,*,#1078,.F.);
#1329=ORIENTED_EDGE('',*,*,#1328,.T.);
#1330=ORIENTED_EDGE('',*,*,#1277,.T.);
#1332=ORIENTED_EDGE('',*,*,#1331,.F.);
#1333=ORIENTED_EDGE('',*,*,#1070,.F.);
#1335=ORIENTED_EDGE('',*,*,#1334,.F.);
#1336=ORIENTED_EDGE('',*,*,#1140,.T.);
#1337=EDGE_LOOP('',(#1326,#1327,#1329,#1330,#1332,#1333,#1335,#1336));
#1338=FACE_OUTER_BOUND('',#1337,.F.);
#1339=ADVANCED_FACE('',(#1338),#1324,.T.);
#1340=CARTESIAN_POINT('',(-1.35E1,7.289972671074E0,-1.35E1));
#1341=DIRECTION('',(0.E0,-1.E0,0.E0));
#1342=DIRECTION('',(-1.E0,0.E0,0.E0));
#1343=AXIS2_PLACEMENT_3D('',#1340,#1341,#1342);
#1344=CYLINDRICAL_SURFACE('',#1343,1.5E0);
#1345=ORIENTED_EDGE('',*,*,#1080,.T.);
#1346=ORIENTED_EDGE('',*,*,#1325,.F.);
#1347=ORIENTED_EDGE('',*,*,#1138,.T.);
#1348=ORIENTED_EDGE('',*,*,#1213,.T.);
#1349=EDGE_LOOP('',(#1345,#1346,#1347,#1348));
#1350=FACE_OUTER_BOUND('',#1349,.F.);
#1351=ADVANCED_FACE('',(#1350),#1344,.T.);
#1352=CARTESIAN_POINT('',(-4.E0,0.E0,-1.4E1));
#1353=DIRECTION('',(-1.E0,0.E0,0.E0));
#1354=DIRECTION('',(0.E0,0.E0,-1.E0));
#1355=AXIS2_PLACEMENT_3D('',#1352,#1353,#1354);
#1356=PLANE('',#1355);
#1357=ORIENTED_EDGE('',*,*,#1076,.T.);
#1359=ORIENTED_EDGE('',*,*,#1358,.T.);
#1360=ORIENTED_EDGE('',*,*,#1279,.T.);
#1361=ORIENTED_EDGE('',*,*,#1328,.F.);
#1362=EDGE_LOOP('',(#1357,#1359,#1360,#1361));
#1363=FACE_OUTER_BOUND('',#1362,.F.);
#1364=ADVANCED_FACE('',(#1363),#1356,.T.);
#1365=CARTESIAN_POINT('',(4.E0,0.E0,-1.4E1));
#1366=DIRECTION('',(0.E0,0.E0,1.E0));
#1367=DIRECTION('',(-1.E0,0.E0,0.E0));
#1368=AXIS2_PLACEMENT_3D('',#1365,#1366,#1367);
#1369=PLANE('',#1368);
#1370=ORIENTED_EDGE('',*,*,#1074,.F.);
#1372=ORIENTED_EDGE('',*,*,#1371,.T.);
#1373=ORIENTED_EDGE('',*,*,#1281,.T.);
#1374=ORIENTED_EDGE('',*,*,#1358,.F.);
#1375=EDGE_LOOP('',(#1370,#1372,#1373,#1374));
#1376=FACE_OUTER_BOUND('',#1375,.F.);
#1377=ADVANCED_FACE('',(#1376),#1369,.T.);
#1378=CARTESIAN_POINT('',(4.E0,0.E0,-1.5E1));
#1379=DIRECTION('',(1.E0,0.E0,0.E0));
#1380=DIRECTION('',(0.E0,0.E0,1.E0));
#1381=AXIS2_PLACEMENT_3D('',#1378,#1379,#1380);
#1382=PLANE('',#1381);
#1383=ORIENTED_EDGE('',*,*,#1072,.F.);
#1384=ORIENTED_EDGE('',*,*,#1331,.T.);
#1385=ORIENTED_EDGE('',*,*,#1283,.T.);
#1386=ORIENTED_EDGE('',*,*,#1371,.F.);
#1387=EDGE_LOOP('',(#1383,#1384,#1385,#1386));
#1388=FACE_OUTER_BOUND('',#1387,.F.);
#1389=ADVANCED_FACE('',(#1388),#1382,.T.);
#1390=CARTESIAN_POINT('',(1.35E1,7.289972671074E0,-1.35E1));
#1391=DIRECTION('',(0.E0,-1.E0,0.E0));
#1392=DIRECTION('',(0.E0,0.E0,-1.E0));
#1393=AXIS2_PLACEMENT_3D('',#1390,#1391,#1392);
#1394=CYLINDRICAL_SURFACE('',#1393,1.5E0);
#1395=ORIENTED_EDGE('',*,*,#1068,.T.);
#1397=ORIENTED_EDGE('',*,*,#1396,.F.);
#1398=ORIENTED_EDGE('',*,*,#1142,.T.);
#1399=ORIENTED_EDGE('',*,*,#1334,.T.);
#1400=EDGE_LOOP('',(#1395,#1397,#1398,#1399));
#1401=FACE_OUTER_BOUND('',#1400,.F.);
#1402=ADVANCED_FACE('',(#1401),#1394,.T.);
#1403=CARTESIAN_POINT('',(1.5E1,0.E0,1.5E1));
#1404=DIRECTION('',(1.E0,0.E0,0.E0));
#1405=DIRECTION('',(0.E0,0.E0,-1.E0));
#1406=AXIS2_PLACEMENT_3D('',#1403,#1404,#1405);
#1407=PLANE('',#1406);
#1409=ORIENTED_EDGE('',*,*,#1408,.F.);
#1410=ORIENTED_EDGE('',*,*,#1144,.T.);
#1411=ORIENTED_EDGE('',*,*,#1396,.T.);
#1412=ORIENTED_EDGE('',*,*,#1066,.F.);
#1414=ORIENTED_EDGE('',*,*,#1413,.T.);
#1415=ORIENTED_EDGE('',*,*,#1311,.T.);
#1417=ORIENTED_EDGE('',*,*,#1416,.F.);
#1418=ORIENTED_EDGE('',*,*,#1058,.F.);
#1419=EDGE_LOOP('',(#1409,#1410,#1411,#1412,#1414,#1415,#1417,#1418));
#1420=FACE_OUTER_BOUND('',#1419,.F.);
#1421=ADVANCED_FACE('',(#1420),#1407,.T.);
#1422=CARTESIAN_POINT('',(1.35E1,7.289972671074E0,1.35E1));
#1423=DIRECTION('',(0.E0,-1.E0,0.E0));
#1424=DIRECTION('',(1.E0,0.E0,0.E0));
#1425=AXIS2_PLACEMENT_3D('',#1422,#1423,#1424);
#1426=CYLINDRICAL_SURFACE('',#1425,1.5E0);
#1427=ORIENTED_EDGE('',*,*,#1056,.T.);
#1429=ORIENTED_EDGE('',*,*,#1428,.F.);
#1430=ORIENTED_EDGE('',*,*,#1146,.T.);
#1431=ORIENTED_EDGE('',*,*,#1408,.T.);
#1432=EDGE_LOOP('',(#1427,#1429,#1430,#1431));
#1433=FACE_OUTER_BOUND('',#1432,.F.);
#1434=ADVANCED_FACE('',(#1433),#1426,.T.);
#1435=CARTESIAN_POINT('',(-1.5E1,0.E0,1.5E1));
#1436=DIRECTION('',(0.E0,0.E0,1.E0));
#1437=DIRECTION('',(1.E0,0.E0,0.E0));
#1438=AXIS2_PLACEMENT_3D('',#1435,#1436,#1437);
#1439=PLANE('',#1438);
#1440=ORIENTED_EDGE('',*,*,#1194,.F.);
#1441=ORIENTED_EDGE('',*,*,#1148,.T.);
#1442=ORIENTED_EDGE('',*,*,#1428,.T.);
#1443=ORIENTED_EDGE('',*,*,#1054,.F.);
#1445=ORIENTED_EDGE('',*,*,#1444,.T.);
#1446=ORIENTED_EDGE('',*,*,#1295,.T.);
#1448=ORIENTED_EDGE('',*,*,#1447,.F.);
#1449=ORIENTED_EDGE('',*,*,#1046,.F.);
#1450=EDGE_LOOP('',(#1440,#1441,#1442,#1443,#1445,#1446,#1448,#1449));
#1451=FACE_OUTER_BOUND('',#1450,.F.);
#1452=ADVANCED_FACE('',(#1451),#1439,.T.);
#1453=CARTESIAN_POINT('',(4.E0,0.E0,1.4E1));
#1454=DIRECTION('',(1.E0,0.E0,0.E0));
#1455=DIRECTION('',(0.E0,0.E0,1.E0));
#1456=AXIS2_PLACEMENT_3D('',#1453,#1454,#1455);
#1457=PLANE('',#1456);
#1458=ORIENTED_EDGE('',*,*,#1052,.T.);
#1460=ORIENTED_EDGE('',*,*,#1459,.T.);
#1461=ORIENTED_EDGE('',*,*,#1297,.T.);
#1462=ORIENTED_EDGE('',*,*,#1444,.F.);
#1463=EDGE_LOOP('',(#1458,#1460,#1461,#1462));
#1464=FACE_OUTER_BOUND('',#1463,.F.);
#1465=ADVANCED_FACE('',(#1464),#1457,.T.);
#1466=CARTESIAN_POINT('',(-4.E0,0.E0,1.4E1));
#1467=DIRECTION('',(0.E0,0.E0,-1.E0));
#1468=DIRECTION('',(1.E0,0.E0,0.E0));
#1469=AXIS2_PLACEMENT_3D('',#1466,#1467,#1468);
#1470=PLANE('',#1469);
#1471=ORIENTED_EDGE('',*,*,#1050,.F.);
#1473=ORIENTED_EDGE('',*,*,#1472,.T.);
#1474=ORIENTED_EDGE('',*,*,#1299,.T.);
#1475=ORIENTED_EDGE('',*,*,#1459,.F.);
#1476=EDGE_LOOP('',(#1471,#1473,#1474,#1475));
#1477=FACE_OUTER_BOUND('',#1476,.F.);
#1478=ADVANCED_FACE('',(#1477),#1470,.T.);
#1479=CARTESIAN_POINT('',(-4.E0,0.E0,1.5E1));
#1480=DIRECTION('',(-1.E0,0.E0,0.E0));
#1481=DIRECTION('',(0.E0,0.E0,-1.E0));
#1482=AXIS2_PLACEMENT_3D('',#1479,#1480,#1481);
#1483=PLANE('',#1482);
#1484=ORIENTED_EDGE('',*,*,#1048,.F.);
#1485=ORIENTED_EDGE('',*,*,#1447,.T.);
#1486=ORIENTED_EDGE('',*,*,#1293,.T.);
#1487=ORIENTED_EDGE('',*,*,#1472,.F.);
#1488=EDGE_LOOP('',(#1484,#1485,#1486,#1487));
#1489=FACE_OUTER_BOUND('',#1488,.F.);
#1490=ADVANCED_FACE('',(#1489),#1483,.T.);
#1491=CARTESIAN_POINT('',(1.4E1,0.E0,-4.E0));
#1492=DIRECTION('',(0.E0,0.E0,-1.E0));
#1493=DIRECTION('',(1.E0,0.E0,0.E0));
#1494=AXIS2_PLACEMENT_3D('',#1491,#1492,#1493);
#1495=PLANE('',#1494);
#1496=ORIENTED_EDGE('',*,*,#1064,.T.);
#1498=ORIENTED_EDGE('',*,*,#1497,.T.);
#1499=ORIENTED_EDGE('',*,*,#1313,.T.);
#1500=ORIENTED_EDGE('',*,*,#1413,.F.);
#1501=EDGE_LOOP('',(#1496,#1498,#1499,#1500));
#1502=FACE_OUTER_BOUND('',#1501,.F.);
#1503=ADVANCED_FACE('',(#1502),#1495,.T.);
#1504=CARTESIAN_POINT('',(1.4E1,0.E0,4.E0));
#1505=DIRECTION('',(-1.E0,0.E0,0.E0));
#1506=DIRECTION('',(0.E0,0.E0,-1.E0));
#1507=AXIS2_PLACEMENT_3D('',#1504,#1505,#1506);
#1508=PLANE('',#1507);
#1509=ORIENTED_EDGE('',*,*,#1062,.F.);
#1511=ORIENTED_EDGE('',*,*,#1510,.T.);
#1512=ORIENTED_EDGE('',*,*,#1315,.T.);
#1513=ORIENTED_EDGE('',*,*,#1497,.F.);
#1514=EDGE_LOOP('',(#1509,#1511,#1512,#1513));
#1515=FACE_OUTER_BOUND('',#1514,.F.);
#1516=ADVANCED_FACE('',(#1515),#1508,.T.);
#1517=CARTESIAN_POINT('',(1.5E1,0.E0,4.E0));
#1518=DIRECTION('',(0.E0,0.E0,1.E0));
#1519=DIRECTION('',(-1.E0,0.E0,0.E0));
#1520=AXIS2_PLACEMENT_3D('',#1517,#1518,#1519);
#1521=PLANE('',#1520);
#1522=ORIENTED_EDGE('',*,*,#1060,.F.);
#1523=ORIENTED_EDGE('',*,*,#1416,.T.);
#1524=ORIENTED_EDGE('',*,*,#1309,.T.);
#1525=ORIENTED_EDGE('',*,*,#1510,.F.);
#1526=EDGE_LOOP('',(#1522,#1523,#1524,#1525));
#1527=FACE_OUTER_BOUND('',#1526,.F.);
#1528=ADVANCED_FACE('',(#1527),#1521,.T.);
#1529=CARTESIAN_POINT('',(-1.E1,7.2E0,-1.4E1));
#1530=DIRECTION('',(0.E0,3.139666865389E-2,-9.995070030757E-1));
#1531=DIRECTION('',(0.E0,9.995070030757E-1,3.139666865389E-2));
#1532=AXIS2_PLACEMENT_3D('',#1529,#1530,#1531);
#1533=PLANE('',#1532);
#1535=ORIENTED_EDGE('',*,*,#1534,.T.);
#1536=ORIENTED_EDGE('',*,*,#1156,.T.);
#1538=ORIENTED_EDGE('',*,*,#1537,.T.);
#1540=ORIENTED_EDGE('',*,*,#1539,.F.);
#1541=EDGE_LOOP('',(#1535,#1536,#1538,#1540));
#1542=FACE_OUTER_BOUND('',#1541,.F.);
#1543=ADVANCED_FACE('',(#1542),#1533,.T.);
#1544=CARTESIAN_POINT('',(-1.E1,7.2E0,-1.4E1));
#1545=DIRECTION('',(0.E0,3.139666865389E-2,-9.995070030757E-1));
#1546=DIRECTION('',(0.E0,9.995070030757E-1,3.139666865389E-2));
#1547=AXIS2_PLACEMENT_3D('',#1544,#1545,#1546);
#1548=PLANE('',#1547);
#1550=ORIENTED_EDGE('',*,*,#1549,.T.);
#1552=ORIENTED_EDGE('',*,*,#1551,.F.);
#1554=ORIENTED_EDGE('',*,*,#1553,.F.);
#1555=ORIENTED_EDGE('',*,*,#1174,.T.);
#1556=EDGE_LOOP('',(#1550,#1552,#1554,#1555));
#1557=FACE_OUTER_BOUND('',#1556,.F.);
#1558=ADVANCED_FACE('',(#1557),#1548,.T.);
#1559=CARTESIAN_POINT('',(-8.E0,2.318014614517E1,-1.149704269619E1));
#1560=DIRECTION('',(0.E0,-9.995070030757E-1,-3.139666865389E-2));
#1561=DIRECTION('',(-1.E0,0.E0,0.E0));
#1562=AXIS2_PLACEMENT_3D('',#1559,#1560,#1561);
#1563=CYLINDRICAL_SURFACE('',#1562,2.E0);
#1564=ORIENTED_EDGE('',*,*,#1534,.F.);
#1566=ORIENTED_EDGE('',*,*,#1565,.F.);
#1568=ORIENTED_EDGE('',*,*,#1567,.T.);
#1569=ORIENTED_EDGE('',*,*,#1158,.T.);
#1570=EDGE_LOOP('',(#1564,#1566,#1568,#1569));
#1571=FACE_OUTER_BOUND('',#1570,.F.);
#1572=ADVANCED_FACE('',(#1571),#1563,.T.);
#1573=CARTESIAN_POINT('',(-8.E0,2.269334125879E1,0.E0));
#1574=DIRECTION('',(1.E0,0.E0,0.E0));
#1575=DIRECTION('',(0.E0,2.210120470930E-2,9.997557385434E-1));
#1576=AXIS2_PLACEMENT_3D('',#1573,#1574,#1575);
#1577=TOROIDAL_SURFACE('',#1576,1.150665874122E1,2.E0);
#1579=ORIENTED_EDGE('',*,*,#1578,.T.);
#1580=ORIENTED_EDGE('',*,*,#1565,.T.);
#1582=ORIENTED_EDGE('',*,*,#1581,.F.);
#1584=ORIENTED_EDGE('',*,*,#1583,.F.);
#1585=EDGE_LOOP('',(#1579,#1580,#1582,#1584));
#1586=FACE_OUTER_BOUND('',#1585,.F.);
#1587=ADVANCED_FACE('',(#1586),#1577,.T.);
#1588=CARTESIAN_POINT('',(-1.E1,0.E0,0.E0));
#1589=DIRECTION('',(1.E0,0.E0,0.E0));
#1590=DIRECTION('',(0.E0,-1.E0,0.E0));
#1591=AXIS2_PLACEMENT_3D('',#1588,#1589,#1590);
#1592=PLANE('',#1591);
#1594=ORIENTED_EDGE('',*,*,#1593,.F.);
#1596=ORIENTED_EDGE('',*,*,#1595,.F.);
#1597=EDGE_LOOP('',(#1594,#1596));
#1598=FACE_OUTER_BOUND('',#1597,.F.);
#1600=ORIENTED_EDGE('',*,*,#1599,.T.);
#1602=ORIENTED_EDGE('',*,*,#1601,.F.);
#1604=ORIENTED_EDGE('',*,*,#1603,.T.);
#1606=ORIENTED_EDGE('',*,*,#1605,.T.);
#1608=ORIENTED_EDGE('',*,*,#1607,.T.);
#1610=ORIENTED_EDGE('',*,*,#1609,.F.);
#1612=ORIENTED_EDGE('',*,*,#1611,.T.);
#1614=ORIENTED_EDGE('',*,*,#1613,.T.);
#1615=EDGE_LOOP('',(#1600,#1602,#1604,#1606,#1608,#1610,#1612,#1614));
#1616=FACE_BOUND('',#1615,.F.);
#1617=ADVANCED_FACE('',(#1598,#1616),#1592,.F.);
#1618=CARTESIAN_POINT('',(-1.E1,0.E0,0.E0));
#1619=DIRECTION('',(1.E0,0.E0,0.E0));
#1620=DIRECTION('',(0.E0,-1.E0,0.E0));
#1621=AXIS2_PLACEMENT_3D('',#1618,#1619,#1620);
#1622=PLANE('',#1621);
#1623=ORIENTED_EDGE('',*,*,#1567,.F.);
#1624=ORIENTED_EDGE('',*,*,#1578,.F.);
#1626=ORIENTED_EDGE('',*,*,#1625,.F.);
#1627=ORIENTED_EDGE('',*,*,#1160,.T.);
#1628=EDGE_LOOP('',(#1623,#1624,#1626,#1627));
#1629=FACE_OUTER_BOUND('',#1628,.F.);
#1631=ORIENTED_EDGE('',*,*,#1630,.T.);
#1633=ORIENTED_EDGE('',*,*,#1632,.T.);
#1634=EDGE_LOOP('',(#1631,#1633));
#1635=FACE_BOUND('',#1634,.F.);
#1636=ADVANCED_FACE('',(#1629,#1635),#1622,.F.);
#1637=CARTESIAN_POINT('',(-1.E1,2.25E1,0.E0));
#1638=DIRECTION('',(-1.E0,0.E0,0.E0));
#1639=DIRECTION('',(0.E0,0.E0,1.E0));
#1640=AXIS2_PLACEMENT_3D('',#1637,#1638,#1639);
#1641=CYLINDRICAL_SURFACE('',#1640,1.1E1);
#1642=ORIENTED_EDGE('',*,*,#1630,.F.);
#1644=ORIENTED_EDGE('',*,*,#1643,.T.);
#1646=ORIENTED_EDGE('',*,*,#1645,.T.);
#1648=ORIENTED_EDGE('',*,*,#1647,.F.);
#1649=EDGE_LOOP('',(#1642,#1644,#1646,#1648));
#1650=FACE_OUTER_BOUND('',#1649,.F.);
#1651=ADVANCED_FACE('',(#1650),#1641,.F.);
#1652=CARTESIAN_POINT('',(-1.E1,2.25E1,0.E0));
#1653=DIRECTION('',(-1.E0,0.E0,0.E0));
#1654=DIRECTION('',(0.E0,0.E0,1.E0));
#1655=AXIS2_PLACEMENT_3D('',#1652,#1653,#1654);
#1656=CYLINDRICAL_SURFACE('',#1655,1.1E1);
#1657=ORIENTED_EDGE('',*,*,#1632,.F.);
#1658=ORIENTED_EDGE('',*,*,#1647,.T.);
#1660=ORIENTED_EDGE('',*,*,#1659,.T.);
#1661=ORIENTED_EDGE('',*,*,#1643,.F.);
#1662=EDGE_LOOP('',(#1657,#1658,#1660,#1661));
#1663=FACE_OUTER_BOUND('',#1662,.F.);
#1664=ADVANCED_FACE('',(#1663),#1656,.F.);
#1665=CARTESIAN_POINT('',(-9.5E0,0.E0,0.E0));
#1666=DIRECTION('',(-1.E0,0.E0,0.E0));
#1667=DIRECTION('',(0.E0,0.E0,1.E0));
#1668=AXIS2_PLACEMENT_3D('',#1665,#1666,#1667);
#1669=PLANE('',#1668);
#1670=ORIENTED_EDGE('',*,*,#1645,.F.);
#1671=ORIENTED_EDGE('',*,*,#1659,.F.);
#1672=EDGE_LOOP('',(#1670,#1671));
#1673=FACE_OUTER_BOUND('',#1672,.F.);
#1675=ORIENTED_EDGE('',*,*,#1674,.F.);
#1677=ORIENTED_EDGE('',*,*,#1676,.F.);
#1678=EDGE_LOOP('',(#1675,#1677));
#1679=FACE_BOUND('',#1678,.F.);
#1681=ORIENTED_EDGE('',*,*,#1680,.T.);
#1683=ORIENTED_EDGE('',*,*,#1682,.T.);
#1684=EDGE_LOOP('',(#1681,#1683));
#1685=FACE_BOUND('',#1684,.F.);
#1687=ORIENTED_EDGE('',*,*,#1686,.T.);
#1689=ORIENTED_EDGE('',*,*,#1688,.T.);
#1690=EDGE_LOOP('',(#1687,#1689));
#1691=FACE_BOUND('',#1690,.F.);
#1692=ADVANCED_FACE('',(#1673,#1679,#1685,#1691),#1669,.T.);
#1693=CARTESIAN_POINT('',(-1.E1,2.25E1,0.E0));
#1694=DIRECTION('',(-1.E0,0.E0,0.E0));
#1695=DIRECTION('',(0.E0,0.E0,1.E0));
#1696=AXIS2_PLACEMENT_3D('',#1693,#1694,#1695);
#1697=CYLINDRICAL_SURFACE('',#1696,7.E0);
#1698=ORIENTED_EDGE('',*,*,#1593,.T.);
#1700=ORIENTED_EDGE('',*,*,#1699,.T.);
#1701=ORIENTED_EDGE('',*,*,#1674,.T.);
#1703=ORIENTED_EDGE('',*,*,#1702,.F.);
#1704=EDGE_LOOP('',(#1698,#1700,#1701,#1703));
#1705=FACE_OUTER_BOUND('',#1704,.F.);
#1706=ADVANCED_FACE('',(#1705),#1697,.T.);
#1707=CARTESIAN_POINT('',(-1.E1,2.25E1,0.E0));
#1708=DIRECTION('',(-1.E0,0.E0,0.E0));
#1709=DIRECTION('',(0.E0,0.E0,1.E0));
#1710=AXIS2_PLACEMENT_3D('',#1707,#1708,#1709);
#1711=CYLINDRICAL_SURFACE('',#1710,7.E0);
#1712=ORIENTED_EDGE('',*,*,#1595,.T.);
#1713=ORIENTED_EDGE('',*,*,#1702,.T.);
#1714=ORIENTED_EDGE('',*,*,#1676,.T.);
#1715=ORIENTED_EDGE('',*,*,#1699,.F.);
#1716=EDGE_LOOP('',(#1712,#1713,#1714,#1715));
#1717=FACE_OUTER_BOUND('',#1716,.F.);
#1718=ADVANCED_FACE('',(#1717),#1711,.T.);
#1719=CARTESIAN_POINT('',(-9.5E0,3.15E1,0.E0));
#1720=DIRECTION('',(-1.E0,0.E0,0.E0));
#1721=DIRECTION('',(0.E0,0.E0,1.E0));
#1722=AXIS2_PLACEMENT_3D('',#1719,#1720,#1721);
#1723=CYLINDRICAL_SURFACE('',#1722,1.2E0);
#1724=ORIENTED_EDGE('',*,*,#1680,.F.);
#1726=ORIENTED_EDGE('',*,*,#1725,.T.);
#1728=ORIENTED_EDGE('',*,*,#1727,.T.);
#1730=ORIENTED_EDGE('',*,*,#1729,.F.);
#1731=EDGE_LOOP('',(#1724,#1726,#1728,#1730));
#1732=FACE_OUTER_BOUND('',#1731,.F.);
#1733=ADVANCED_FACE('',(#1732),#1723,.F.);
#1734=CARTESIAN_POINT('',(-9.5E0,3.15E1,0.E0));
#1735=DIRECTION('',(-1.E0,0.E0,0.E0));
#1736=DIRECTION('',(0.E0,0.E0,1.E0));
#1737=AXIS2_PLACEMENT_3D('',#1734,#1735,#1736);
#1738=CYLINDRICAL_SURFACE('',#1737,1.2E0);
#1739=ORIENTED_EDGE('',*,*,#1682,.F.);
#1740=ORIENTED_EDGE('',*,*,#1729,.T.);
#1742=ORIENTED_EDGE('',*,*,#1741,.T.);
#1743=ORIENTED_EDGE('',*,*,#1725,.F.);
#1744=EDGE_LOOP('',(#1739,#1740,#1742,#1743));
#1745=FACE_OUTER_BOUND('',#1744,.F.);
#1746=ADVANCED_FACE('',(#1745),#1738,.F.);
#1747=CARTESIAN_POINT('',(-7.3E0,0.E0,0.E0));
#1748=DIRECTION('',(-1.E0,0.E0,0.E0));
#1749=DIRECTION('',(0.E0,0.E0,1.E0));
#1750=AXIS2_PLACEMENT_3D('',#1747,#1748,#1749);
#1751=PLANE('',#1750);
#1752=ORIENTED_EDGE('',*,*,#1727,.F.);
#1753=ORIENTED_EDGE('',*,*,#1741,.F.);
#1754=EDGE_LOOP('',(#1752,#1753));
#1755=FACE_OUTER_BOUND('',#1754,.F.);
#1756=ADVANCED_FACE('',(#1755),#1751,.T.);
#1757=CARTESIAN_POINT('',(-7.3E0,0.E0,0.E0));
#1758=DIRECTION('',(-1.E0,0.E0,0.E0));
#1759=DIRECTION('',(0.E0,0.E0,1.E0));
#1760=AXIS2_PLACEMENT_3D('',#1757,#1758,#1759);
#1761=PLANE('',#1760);
#1763=ORIENTED_EDGE('',*,*,#1762,.F.);
#1765=ORIENTED_EDGE('',*,*,#1764,.F.);
#1766=EDGE_LOOP('',(#1763,#1765));
#1767=FACE_OUTER_BOUND('',#1766,.F.);
#1768=ADVANCED_FACE('',(#1767),#1761,.T.);
#1769=CARTESIAN_POINT('',(-9.5E0,1.35E1,0.E0));
#1770=DIRECTION('',(-1.E0,0.E0,0.E0));
#1771=DIRECTION('',(0.E0,0.E0,1.E0));
#1772=AXIS2_PLACEMENT_3D('',#1769,#1770,#1771);
#1773=CYLINDRICAL_SURFACE('',#1772,1.2E0);
#1774=ORIENTED_EDGE('',*,*,#1686,.F.);
#1776=ORIENTED_EDGE('',*,*,#1775,.T.);
#1777=ORIENTED_EDGE('',*,*,#1762,.T.);
#1779=ORIENTED_EDGE('',*,*,#1778,.F.);
#1780=EDGE_LOOP('',(#1774,#1776,#1777,#1779));
#1781=FACE_OUTER_BOUND('',#1780,.F.);
#1782=ADVANCED_FACE('',(#1781),#1773,.F.);
#1783=CARTESIAN_POINT('',(-9.5E0,1.35E1,0.E0));
#1784=DIRECTION('',(-1.E0,0.E0,0.E0));
#1785=DIRECTION('',(0.E0,0.E0,1.E0));
#1786=AXIS2_PLACEMENT_3D('',#1783,#1784,#1785);
#1787=CYLINDRICAL_SURFACE('',#1786,1.2E0);
#1788=ORIENTED_EDGE('',*,*,#1688,.F.);
#1789=ORIENTED_EDGE('',*,*,#1778,.T.);
#1790=ORIENTED_EDGE('',*,*,#1764,.T.);
#1791=ORIENTED_EDGE('',*,*,#1775,.F.);
#1792=EDGE_LOOP('',(#1788,#1789,#1790,#1791));
#1793=FACE_OUTER_BOUND('',#1792,.F.);
#1794=ADVANCED_FACE('',(#1793),#1787,.F.);
#1795=CARTESIAN_POINT('',(-1.E1,2.79E1,-1.E0));
#1796=DIRECTION('',(0.E0,0.E0,-1.E0));
#1797=DIRECTION('',(0.E0,-1.E0,0.E0));
#1798=AXIS2_PLACEMENT_3D('',#1795,#1796,#1797);
#1799=PLANE('',#1798);
#1800=ORIENTED_EDGE('',*,*,#1599,.F.);
#1802=ORIENTED_EDGE('',*,*,#1801,.T.);
#1804=ORIENTED_EDGE('',*,*,#1803,.T.);
#1806=ORIENTED_EDGE('',*,*,#1805,.F.);
#1807=EDGE_LOOP('',(#1800,#1802,#1804,#1806));
#1808=FACE_OUTER_BOUND('',#1807,.F.);
#1809=ADVANCED_FACE('',(#1808),#1799,.T.);
#1810=CARTESIAN_POINT('',(-1.E1,2.79E1,-1.E0));
#1811=DIRECTION('',(0.E0,0.E0,-1.E0));
#1812=DIRECTION('',(0.E0,-1.E0,0.E0));
#1813=AXIS2_PLACEMENT_3D('',#1810,#1811,#1812);
#1814=PLANE('',#1813);
#1815=ORIENTED_EDGE('',*,*,#1603,.F.);
#1817=ORIENTED_EDGE('',*,*,#1816,.T.);
#1819=ORIENTED_EDGE('',*,*,#1818,.T.);
#1821=ORIENTED_EDGE('',*,*,#1820,.F.);
#1822=EDGE_LOOP('',(#1815,#1817,#1819,#1821));
#1823=FACE_OUTER_BOUND('',#1822,.F.);
#1824=ADVANCED_FACE('',(#1823),#1814,.T.);
#1825=CARTESIAN_POINT('',(-1.E1,2.79E1,1.E0));
#1826=DIRECTION('',(0.E0,1.E0,0.E0));
#1827=DIRECTION('',(0.E0,0.E0,-1.E0));
#1828=AXIS2_PLACEMENT_3D('',#1825,#1826,#1827);
#1829=PLANE('',#1828);
#1830=ORIENTED_EDGE('',*,*,#1613,.F.);
#1832=ORIENTED_EDGE('',*,*,#1831,.T.);
#1834=ORIENTED_EDGE('',*,*,#1833,.T.);
#1835=ORIENTED_EDGE('',*,*,#1801,.F.);
#1836=EDGE_LOOP('',(#1830,#1832,#1834,#1835));
#1837=FACE_OUTER_BOUND('',#1836,.F.);
#1838=ADVANCED_FACE('',(#1837),#1829,.T.);
#1839=CARTESIAN_POINT('',(-1.E1,1.71E1,1.E0));
#1840=DIRECTION('',(0.E0,0.E0,1.E0));
#1841=DIRECTION('',(0.E0,1.E0,0.E0));
#1842=AXIS2_PLACEMENT_3D('',#1839,#1840,#1841);
#1843=PLANE('',#1842);
#1844=ORIENTED_EDGE('',*,*,#1607,.F.);
#1846=ORIENTED_EDGE('',*,*,#1845,.T.);
#1848=ORIENTED_EDGE('',*,*,#1847,.T.);
#1850=ORIENTED_EDGE('',*,*,#1849,.F.);
#1851=EDGE_LOOP('',(#1844,#1846,#1848,#1850));
#1852=FACE_OUTER_BOUND('',#1851,.F.);
#1853=ADVANCED_FACE('',(#1852),#1843,.T.);
#1854=CARTESIAN_POINT('',(-1.E1,1.71E1,1.E0));
#1855=DIRECTION('',(0.E0,0.E0,1.E0));
#1856=DIRECTION('',(0.E0,1.E0,0.E0));
#1857=AXIS2_PLACEMENT_3D('',#1854,#1855,#1856);
#1858=PLANE('',#1857);
#1859=ORIENTED_EDGE('',*,*,#1611,.F.);
#1861=ORIENTED_EDGE('',*,*,#1860,.T.);
#1863=ORIENTED_EDGE('',*,*,#1862,.T.);
#1864=ORIENTED_EDGE('',*,*,#1831,.F.);
#1865=EDGE_LOOP('',(#1859,#1861,#1863,#1864));
#1866=FACE_OUTER_BOUND('',#1865,.F.);
#1867=ADVANCED_FACE('',(#1866),#1858,.T.);
#1868=CARTESIAN_POINT('',(-1.E1,1.71E1,-1.E0));
#1869=DIRECTION('',(0.E0,-1.E0,0.E0));
#1870=DIRECTION('',(0.E0,0.E0,1.E0));
#1871=AXIS2_PLACEMENT_3D('',#1868,#1869,#1870);
#1872=PLANE('',#1871);
#1873=ORIENTED_EDGE('',*,*,#1605,.F.);
#1874=ORIENTED_EDGE('',*,*,#1820,.T.);
#1876=ORIENTED_EDGE('',*,*,#1875,.T.);
#1877=ORIENTED_EDGE('',*,*,#1845,.F.);
#1878=EDGE_LOOP('',(#1873,#1874,#1876,#1877));
#1879=FACE_OUTER_BOUND('',#1878,.F.);
#1880=ADVANCED_FACE('',(#1879),#1872,.T.);
#1881=CARTESIAN_POINT('',(-1.19E1,0.E0,0.E0));
#1882=DIRECTION('',(-1.E0,0.E0,0.E0));
#1883=DIRECTION('',(0.E0,0.E0,1.E0));
#1884=AXIS2_PLACEMENT_3D('',#1881,#1882,#1883);
#1885=PLANE('',#1884);
#1887=ORIENTED_EDGE('',*,*,#1886,.F.);
#1888=ORIENTED_EDGE('',*,*,#1847,.F.);
#1889=ORIENTED_EDGE('',*,*,#1875,.F.);
#1890=ORIENTED_EDGE('',*,*,#1818,.F.);
#1892=ORIENTED_EDGE('',*,*,#1891,.F.);
#1893=ORIENTED_EDGE('',*,*,#1803,.F.);
#1894=ORIENTED_EDGE('',*,*,#1833,.F.);
#1895=ORIENTED_EDGE('',*,*,#1862,.F.);
#1896=EDGE_LOOP('',(#1887,#1888,#1889,#1890,#1892,#1893,#1894,#1895));
#1897=FACE_OUTER_BOUND('',#1896,.F.);
#1899=ORIENTED_EDGE('',*,*,#1898,.F.);
#1901=ORIENTED_EDGE('',*,*,#1900,.F.);
#1902=EDGE_LOOP('',(#1899,#1901));
#1903=FACE_BOUND('',#1902,.F.);
#1904=ADVANCED_FACE('',(#1897,#1903),#1885,.T.);
#1905=CARTESIAN_POINT('',(-1.E1,2.25E1,0.E0));
#1906=DIRECTION('',(-1.E0,0.E0,0.E0));
#1907=DIRECTION('',(0.E0,0.E0,1.E0));
#1908=AXIS2_PLACEMENT_3D('',#1905,#1906,#1907);
#1909=CYLINDRICAL_SURFACE('',#1908,3.7E0);
#1910=ORIENTED_EDGE('',*,*,#1891,.T.);
#1911=ORIENTED_EDGE('',*,*,#1816,.F.);
#1912=ORIENTED_EDGE('',*,*,#1601,.T.);
#1913=ORIENTED_EDGE('',*,*,#1805,.T.);
#1914=EDGE_LOOP('',(#1910,#1911,#1912,#1913));
#1915=FACE_OUTER_BOUND('',#1914,.F.);
#1916=ADVANCED_FACE('',(#1915),#1909,.T.);
#1917=CARTESIAN_POINT('',(-1.E1,2.25E1,0.E0));
#1918=DIRECTION('',(-1.E0,0.E0,0.E0));
#1919=DIRECTION('',(0.E0,0.E0,1.E0));
#1920=AXIS2_PLACEMENT_3D('',#1917,#1918,#1919);
#1921=CYLINDRICAL_SURFACE('',#1920,3.7E0);
#1922=ORIENTED_EDGE('',*,*,#1609,.T.);
#1923=ORIENTED_EDGE('',*,*,#1849,.T.);
#1924=ORIENTED_EDGE('',*,*,#1886,.T.);
#1925=ORIENTED_EDGE('',*,*,#1860,.F.);
#1926=EDGE_LOOP('',(#1922,#1923,#1924,#1925));
#1927=FACE_OUTER_BOUND('',#1926,.F.);
#1928=ADVANCED_FACE('',(#1927),#1921,.T.);
#1929=CARTESIAN_POINT('',(-1.856E1,2.25E1,0.E0));
#1930=DIRECTION('',(1.E0,0.E0,0.E0));
#1931=DIRECTION('',(0.E0,-1.E0,0.E0));
#1932=AXIS2_PLACEMENT_3D('',#1929,#1930,#1931);
#1933=CYLINDRICAL_SURFACE('',#1932,2.1E0);
#1935=ORIENTED_EDGE('',*,*,#1934,.F.);
#1937=ORIENTED_EDGE('',*,*,#1936,.F.);
#1938=ORIENTED_EDGE('',*,*,#1898,.T.);
#1940=ORIENTED_EDGE('',*,*,#1939,.T.);
#1941=EDGE_LOOP('',(#1935,#1937,#1938,#1940));
#1942=FACE_OUTER_BOUND('',#1941,.F.);
#1943=ADVANCED_FACE('',(#1942),#1933,.F.);
#1944=CARTESIAN_POINT('',(-6.8E0,7.2E0,-1.5E1));
#1945=DIRECTION('',(-1.E0,0.E0,0.E0));
#1946=DIRECTION('',(0.E0,1.E0,0.E0));
#1947=AXIS2_PLACEMENT_3D('',#1944,#1945,#1946);
#1948=PLANE('',#1947);
#1950=ORIENTED_EDGE('',*,*,#1949,.F.);
#1951=ORIENTED_EDGE('',*,*,#1537,.F.);
#1952=ORIENTED_EDGE('',*,*,#1166,.T.);
#1954=ORIENTED_EDGE('',*,*,#1953,.F.);
#1955=EDGE_LOOP('',(#1950,#1951,#1952,#1954));
#1956=FACE_OUTER_BOUND('',#1955,.F.);
#1957=ORIENTED_EDGE('',*,*,#1934,.T.);
#1959=ORIENTED_EDGE('',*,*,#1958,.T.);
#1960=EDGE_LOOP('',(#1957,#1959));
#1961=FACE_BOUND('',#1960,.F.);
#1962=ADVANCED_FACE('',(#1956,#1961),#1948,.F.);
#1963=CARTESIAN_POINT('',(-1.E1,2.269334125879E1,0.E0));
#1964=DIRECTION('',(1.E0,0.E0,0.E0));
#1965=DIRECTION('',(0.E0,-1.E0,0.E0));
#1966=AXIS2_PLACEMENT_3D('',#1963,#1964,#1965);
#1967=CYLINDRICAL_SURFACE('',#1966,1.350665874122E1);
#1968=ORIENTED_EDGE('',*,*,#1581,.T.);
#1969=ORIENTED_EDGE('',*,*,#1539,.T.);
#1970=ORIENTED_EDGE('',*,*,#1949,.T.);
#1972=ORIENTED_EDGE('',*,*,#1971,.F.);
#1973=EDGE_LOOP('',(#1968,#1969,#1970,#1972));
#1974=FACE_OUTER_BOUND('',#1973,.F.);
#1975=ADVANCED_FACE('',(#1974),#1967,.T.);
#1976=CARTESIAN_POINT('',(-1.E1,2.269334125879E1,0.E0));
#1977=DIRECTION('',(1.E0,0.E0,0.E0));
#1978=DIRECTION('',(0.E0,-1.E0,0.E0));
#1979=AXIS2_PLACEMENT_3D('',#1976,#1977,#1978);
#1980=CYLINDRICAL_SURFACE('',#1979,1.350665874122E1);
#1982=ORIENTED_EDGE('',*,*,#1981,.T.);
#1984=ORIENTED_EDGE('',*,*,#1983,.F.);
#1986=ORIENTED_EDGE('',*,*,#1985,.T.);
#1987=ORIENTED_EDGE('',*,*,#1551,.T.);
#1988=EDGE_LOOP('',(#1982,#1984,#1986,#1987));
#1989=FACE_OUTER_BOUND('',#1988,.F.);
#1990=ADVANCED_FACE('',(#1989),#1980,.T.);
#1991=CARTESIAN_POINT('',(-1.E1,2.311740534791E1,1.35E1));
#1992=DIRECTION('',(0.E0,3.139666865388E-2,9.995070030757E-1));
#1993=DIRECTION('',(0.E0,-9.995070030757E-1,3.139666865388E-2));
#1994=AXIS2_PLACEMENT_3D('',#1991,#1992,#1993);
#1995=PLANE('',#1994);
#1997=ORIENTED_EDGE('',*,*,#1996,.T.);
#1998=ORIENTED_EDGE('',*,*,#1971,.T.);
#1999=ORIENTED_EDGE('',*,*,#1953,.T.);
#2000=ORIENTED_EDGE('',*,*,#1164,.F.);
#2001=EDGE_LOOP('',(#1997,#1998,#1999,#2000));
#2002=FACE_OUTER_BOUND('',#2001,.F.);
#2003=ADVANCED_FACE('',(#2002),#1995,.T.);
#2004=CARTESIAN_POINT('',(-1.E1,2.311740534791E1,1.35E1));
#2005=DIRECTION('',(0.E0,3.139666865388E-2,9.995070030757E-1));
#2006=DIRECTION('',(0.E0,-9.995070030757E-1,3.139666865388E-2));
#2007=AXIS2_PLACEMENT_3D('',#2004,#2005,#2006);
#2008=PLANE('',#2007);
#2010=ORIENTED_EDGE('',*,*,#2009,.T.);
#2011=ORIENTED_EDGE('',*,*,#1178,.F.);
#2013=ORIENTED_EDGE('',*,*,#2012,.F.);
#2014=ORIENTED_EDGE('',*,*,#1983,.T.);
#2015=EDGE_LOOP('',(#2010,#2011,#2013,#2014));
#2016=FACE_OUTER_BOUND('',#2015,.F.);
#2017=ADVANCED_FACE('',(#2016),#2008,.T.);
#2018=CARTESIAN_POINT('',(-8.E0,7.114988245376E0,1.200168392221E1));
#2019=DIRECTION('',(0.E0,9.995070030757E-1,-3.139666865389E-2));
#2020=DIRECTION('',(-1.E0,0.E0,0.E0));
#2021=AXIS2_PLACEMENT_3D('',#2018,#2019,#2020);
#2022=CYLINDRICAL_SURFACE('',#2021,2.E0);
#2023=ORIENTED_EDGE('',*,*,#1625,.T.);
#2024=ORIENTED_EDGE('',*,*,#1583,.T.);
#2025=ORIENTED_EDGE('',*,*,#1996,.F.);
#2026=ORIENTED_EDGE('',*,*,#1162,.T.);
#2027=EDGE_LOOP('',(#2023,#2024,#2025,#2026));
#2028=FACE_OUTER_BOUND('',#2027,.F.);
#2029=ADVANCED_FACE('',(#2028),#2022,.T.);
#2030=CARTESIAN_POINT('',(1.22E1,2.314298175187E1,1.149821010986E1));
#2031=DIRECTION('',(0.E0,-9.995070030757E-1,3.139666865389E-2));
#2032=DIRECTION('',(1.E0,0.E0,0.E0));
#2033=AXIS2_PLACEMENT_3D('',#2030,#2031,#2032);
#2034=CYLINDRICAL_SURFACE('',#2033,2.E0);
#2035=ORIENTED_EDGE('',*,*,#2009,.F.);
#2037=ORIENTED_EDGE('',*,*,#2036,.F.);
#2039=ORIENTED_EDGE('',*,*,#2038,.T.);
#2040=ORIENTED_EDGE('',*,*,#1180,.T.);
#2041=EDGE_LOOP('',(#2035,#2037,#2039,#2040));
#2042=FACE_OUTER_BOUND('',#2041,.F.);
#2043=ADVANCED_FACE('',(#2042),#2034,.T.);
#2044=CARTESIAN_POINT('',(1.22E1,2.269334125879E1,0.E0));
#2045=DIRECTION('',(1.E0,0.E0,0.E0));
#2046=DIRECTION('',(0.E0,2.485336307557E-2,-9.996911074646E-1));
#2047=AXIS2_PLACEMENT_3D('',#2044,#2045,#2046);
#2048=TOROIDAL_SURFACE('',#2047,1.150665874122E1,2.E0);
#2050=ORIENTED_EDGE('',*,*,#2049,.T.);
#2051=ORIENTED_EDGE('',*,*,#2036,.T.);
#2052=ORIENTED_EDGE('',*,*,#1981,.F.);
#2054=ORIENTED_EDGE('',*,*,#2053,.F.);
#2055=EDGE_LOOP('',(#2050,#2051,#2052,#2054));
#2056=FACE_OUTER_BOUND('',#2055,.F.);
#2057=ADVANCED_FACE('',(#2056),#2048,.T.);
#2058=CARTESIAN_POINT('',(1.42E1,0.E0,0.E0));
#2059=DIRECTION('',(1.E0,0.E0,0.E0));
#2060=DIRECTION('',(0.E0,-1.E0,0.E0));
#2061=AXIS2_PLACEMENT_3D('',#2058,#2059,#2060);
#2062=PLANE('',#2061);
#2063=ORIENTED_EDGE('',*,*,#2038,.F.);
#2064=ORIENTED_EDGE('',*,*,#2049,.F.);
#2066=ORIENTED_EDGE('',*,*,#2065,.F.);
#2067=ORIENTED_EDGE('',*,*,#1170,.F.);
#2068=EDGE_LOOP('',(#2063,#2064,#2066,#2067));
#2069=FACE_OUTER_BOUND('',#2068,.F.);
#2071=ORIENTED_EDGE('',*,*,#2070,.T.);
#2073=ORIENTED_EDGE('',*,*,#2072,.T.);
#2074=EDGE_LOOP('',(#2071,#2073));
#2075=FACE_BOUND('',#2074,.F.);
#2076=ADVANCED_FACE('',(#2069,#2075),#2062,.T.);
#2077=CARTESIAN_POINT('',(1.42E1,2.25E1,0.E0));
#2078=DIRECTION('',(1.E0,0.E0,0.E0));
#2079=DIRECTION('',(0.E0,0.E0,-1.E0));
#2080=AXIS2_PLACEMENT_3D('',#2077,#2078,#2079);
#2081=CYLINDRICAL_SURFACE('',#2080,8.E0);
#2082=ORIENTED_EDGE('',*,*,#2070,.F.);
#2084=ORIENTED_EDGE('',*,*,#2083,.T.);
#2086=ORIENTED_EDGE('',*,*,#2085,.T.);
#2088=ORIENTED_EDGE('',*,*,#2087,.F.);
#2089=EDGE_LOOP('',(#2082,#2084,#2086,#2088));
#2090=FACE_OUTER_BOUND('',#2089,.F.);
#2091=ADVANCED_FACE('',(#2090),#2081,.F.);
#2092=CARTESIAN_POINT('',(1.42E1,2.25E1,0.E0));
#2093=DIRECTION('',(1.E0,0.E0,0.E0));
#2094=DIRECTION('',(0.E0,0.E0,-1.E0));
#2095=AXIS2_PLACEMENT_3D('',#2092,#2093,#2094);
#2096=CYLINDRICAL_SURFACE('',#2095,8.E0);
#2097=ORIENTED_EDGE('',*,*,#2072,.F.);
#2098=ORIENTED_EDGE('',*,*,#2087,.T.);
#2100=ORIENTED_EDGE('',*,*,#2099,.T.);
#2101=ORIENTED_EDGE('',*,*,#2083,.F.);
#2102=EDGE_LOOP('',(#2097,#2098,#2100,#2101));
#2103=FACE_OUTER_BOUND('',#2102,.F.);
#2104=ADVANCED_FACE('',(#2103),#2096,.F.);
#2105=CARTESIAN_POINT('',(1.29E1,0.E0,0.E0));
#2106=DIRECTION('',(1.E0,0.E0,0.E0));
#2107=DIRECTION('',(0.E0,0.E0,-1.E0));
#2108=AXIS2_PLACEMENT_3D('',#2105,#2106,#2107);
#2109=PLANE('',#2108);
#2110=ORIENTED_EDGE('',*,*,#2085,.F.);
#2111=ORIENTED_EDGE('',*,*,#2099,.F.);
#2112=EDGE_LOOP('',(#2110,#2111));
#2113=FACE_OUTER_BOUND('',#2112,.F.);
#2115=ORIENTED_EDGE('',*,*,#2114,.T.);
#2117=ORIENTED_EDGE('',*,*,#2116,.T.);
#2118=EDGE_LOOP('',(#2115,#2117));
#2119=FACE_BOUND('',#2118,.F.);
#2120=ADVANCED_FACE('',(#2113,#2119),#2109,.T.);
#2121=CARTESIAN_POINT('',(1.42E1,2.25E1,0.E0));
#2122=DIRECTION('',(1.E0,0.E0,0.E0));
#2123=DIRECTION('',(0.E0,0.E0,-1.E0));
#2124=AXIS2_PLACEMENT_3D('',#2121,#2122,#2123);
#2125=CYLINDRICAL_SURFACE('',#2124,5.6E0);
#2126=ORIENTED_EDGE('',*,*,#2114,.F.);
#2128=ORIENTED_EDGE('',*,*,#2127,.T.);
#2130=ORIENTED_EDGE('',*,*,#2129,.T.);
#2132=ORIENTED_EDGE('',*,*,#2131,.F.);
#2133=EDGE_LOOP('',(#2126,#2128,#2130,#2132));
#2134=FACE_OUTER_BOUND('',#2133,.F.);
#2135=ADVANCED_FACE('',(#2134),#2125,.F.);
#2136=CARTESIAN_POINT('',(1.42E1,2.25E1,0.E0));
#2137=DIRECTION('',(1.E0,0.E0,0.E0));
#2138=DIRECTION('',(0.E0,0.E0,-1.E0));
#2139=AXIS2_PLACEMENT_3D('',#2136,#2137,#2138);
#2140=CYLINDRICAL_SURFACE('',#2139,5.6E0);
#2141=ORIENTED_EDGE('',*,*,#2116,.F.);
#2142=ORIENTED_EDGE('',*,*,#2131,.T.);
#2144=ORIENTED_EDGE('',*,*,#2143,.T.);
#2145=ORIENTED_EDGE('',*,*,#2127,.F.);
#2146=EDGE_LOOP('',(#2141,#2142,#2144,#2145));
#2147=FACE_OUTER_BOUND('',#2146,.F.);
#2148=ADVANCED_FACE('',(#2147),#2140,.F.);
#2149=CARTESIAN_POINT('',(1.1E1,3.620000000001E1,-1.5E1));
#2150=DIRECTION('',(1.E0,0.E0,0.E0));
#2151=DIRECTION('',(0.E0,-1.E0,0.E0));
#2152=AXIS2_PLACEMENT_3D('',#2149,#2150,#2151);
#2153=PLANE('',#2152);
#2154=ORIENTED_EDGE('',*,*,#1985,.F.);
#2155=ORIENTED_EDGE('',*,*,#2012,.T.);
#2156=ORIENTED_EDGE('',*,*,#1176,.F.);
#2157=ORIENTED_EDGE('',*,*,#1553,.T.);
#2158=EDGE_LOOP('',(#2154,#2155,#2156,#2157));
#2159=FACE_OUTER_BOUND('',#2158,.F.);
#2160=ORIENTED_EDGE('',*,*,#2129,.F.);
#2161=ORIENTED_EDGE('',*,*,#2143,.F.);
#2162=EDGE_LOOP('',(#2160,#2161));
#2163=FACE_BOUND('',#2162,.F.);
#2164=ADVANCED_FACE('',(#2159,#2163),#2153,.F.);
#2165=CARTESIAN_POINT('',(1.22E1,7.114988245376E0,-1.200168392221E1));
#2166=DIRECTION('',(0.E0,9.995070030757E-1,3.139666865389E-2));
#2167=DIRECTION('',(1.E0,0.E0,0.E0));
#2168=AXIS2_PLACEMENT_3D('',#2165,#2166,#2167);
#2169=CYLINDRICAL_SURFACE('',#2168,2.E0);
#2170=ORIENTED_EDGE('',*,*,#2065,.T.);
#2171=ORIENTED_EDGE('',*,*,#2053,.T.);
#2172=ORIENTED_EDGE('',*,*,#1549,.F.);
#2173=ORIENTED_EDGE('',*,*,#1172,.T.);
#2174=EDGE_LOOP('',(#2170,#2171,#2172,#2173));
#2175=FACE_OUTER_BOUND('',#2174,.F.);
#2176=ADVANCED_FACE('',(#2175),#2169,.T.);
#2177=CARTESIAN_POINT('',(-1.856E1,2.25E1,0.E0));
#2178=DIRECTION('',(1.E0,0.E0,0.E0));
#2179=DIRECTION('',(0.E0,-1.E0,0.E0));
#2180=AXIS2_PLACEMENT_3D('',#2177,#2178,#2179);
#2181=CYLINDRICAL_SURFACE('',#2180,2.1E0);
#2182=ORIENTED_EDGE('',*,*,#1958,.F.);
#2183=ORIENTED_EDGE('',*,*,#1939,.F.);
#2184=ORIENTED_EDGE('',*,*,#1900,.T.);
#2185=ORIENTED_EDGE('',*,*,#1936,.T.);
#2186=EDGE_LOOP('',(#2182,#2183,#2184,#2185));
#2187=FACE_OUTER_BOUND('',#2186,.F.);
#2188=ADVANCED_FACE('',(#2187),#2181,.F.);
#2189=CLOSED_SHELL('',(#1100,#1115,#1128,#1184,#1198,#1218,#1232,#1246,#1259,
#1271,#1287,#1303,#1319,#1339,#1351,#1364,#1377,#1389,#1402,#1421,#1434,#1452,
#1465,#1478,#1490,#1503,#1516,#1528,#1543,#1558,#1572,#1587,#1617,#1636,#1651,
#1664,#1692,#1706,#1718,#1733,#1746,#1756,#1768,#1782,#1794,#1809,#1824,#1838,
#1853,#1867,#1880,#1904,#1916,#1928,#1943,#1962,#1975,#1990,#2003,#2017,#2029,
#2043,#2057,#2076,#2091,#2104,#2120,#2135,#2148,#2164,#2176,#2188));
#2190=CARTESIAN_POINT('',(-6.8E0,2.25E1,0.E0));
#2191=DIRECTION('',(-1.E0,0.E0,0.E0));
#2192=DIRECTION('',(0.E0,1.E0,0.E0));
#2193=AXIS2_PLACEMENT_3D('',#2190,#2191,#2192);
#2195=CARTESIAN_POINT('',(-1.19E1,2.25E1,0.E0));
#2196=DIRECTION('',(1.E0,0.E0,0.E0));
#2197=DIRECTION('',(0.E0,-1.E0,0.E0));
#2198=AXIS2_PLACEMENT_3D('',#2195,#2196,#2197);
#2200=CARTESIAN_POINT('',(-6.8E0,2.25E1,0.E0));
#2201=DIRECTION('',(-1.E0,0.E0,0.E0));
#2202=DIRECTION('',(0.E0,-1.E0,0.E0));
#2203=AXIS2_PLACEMENT_3D('',#2200,#2201,#2202);
#2205=DIRECTION('',(-1.E0,0.E0,0.E0));
#2206=VECTOR('',#2205,5.1E0);
#2207=CARTESIAN_POINT('',(-6.8E0,2.5E1,0.E0));
#2208=LINE('',#2207,#2206);
#2209=CARTESIAN_POINT('',(-1.19E1,2.25E1,0.E0));
#2210=DIRECTION('',(1.E0,0.E0,0.E0));
#2211=DIRECTION('',(0.E0,1.E0,0.E0));
#2212=AXIS2_PLACEMENT_3D('',#2209,#2210,#2211);
#2214=DIRECTION('',(-1.E0,0.E0,0.E0));
#2215=VECTOR('',#2214,5.1E0);
#2216=CARTESIAN_POINT('',(-6.8E0,2.E1,0.E0));
#2217=LINE('',#2216,#2215);
#2218=CARTESIAN_POINT('',(-6.8E0,2.E1,0.E0));
#2219=CARTESIAN_POINT('',(-6.8E0,2.5E1,0.E0));
#2220=VERTEX_POINT('',#2218);
#2221=VERTEX_POINT('',#2219);
#2222=CARTESIAN_POINT('',(-1.19E1,2.E1,0.E0));
#2223=CARTESIAN_POINT('',(-1.19E1,2.5E1,0.E0));
#2224=VERTEX_POINT('',#2222);
#2225=VERTEX_POINT('',#2223);
#2226=CARTESIAN_POINT('',(-1.856E1,2.25E1,0.E0));
#2227=DIRECTION('',(1.E0,0.E0,0.E0));
#2228=DIRECTION('',(0.E0,-1.E0,0.E0));
#2229=AXIS2_PLACEMENT_3D('',#2226,#2227,#2228);
#2230=CYLINDRICAL_SURFACE('',#2229,2.5E0);
#2232=ORIENTED_EDGE('',*,*,#2231,.T.);
#2234=ORIENTED_EDGE('',*,*,#2233,.T.);
#2236=ORIENTED_EDGE('',*,*,#2235,.T.);
#2238=ORIENTED_EDGE('',*,*,#2237,.F.);
#2239=EDGE_LOOP('',(#2232,#2234,#2236,#2238));
#2240=FACE_OUTER_BOUND('',#2239,.F.);
#2241=ADVANCED_FACE('',(#2240),#2230,.F.);
#2242=CARTESIAN_POINT('',(-1.856E1,2.25E1,0.E0));
#2243=DIRECTION('',(1.E0,0.E0,0.E0));
#2244=DIRECTION('',(0.E0,-1.E0,0.E0));
#2245=AXIS2_PLACEMENT_3D('',#2242,#2243,#2244);
#2246=CYLINDRICAL_SURFACE('',#2245,2.5E0);
#2248=ORIENTED_EDGE('',*,*,#2247,.T.);
#2249=ORIENTED_EDGE('',*,*,#2237,.T.);
#2251=ORIENTED_EDGE('',*,*,#2250,.T.);
#2252=ORIENTED_EDGE('',*,*,#2233,.F.);
#2253=EDGE_LOOP('',(#2248,#2249,#2251,#2252));
#2254=FACE_OUTER_BOUND('',#2253,.F.);
#2255=ADVANCED_FACE('',(#2254),#2246,.F.);
#2256=OPEN_SHELL('',(#2241,#2255));
#2257=MANIFOLD_SOLID_BREP('',#2189);
#2258=SHELL_BASED_SURFACE_MODEL('',(#2256));
#2259=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#2260=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#2261=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#2262=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#2261);
#2263=(CONVERSION_BASED_UNIT('DEGREE',#2262)NAMED_UNIT(#2260)PLANE_ANGLE_UNIT(
));
#2264=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#2265=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(5.749787261859E-3),#2259,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#2266=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#2265))GLOBAL_UNIT_ASSIGNED_CONTEXT((#2259,#2263,#2264))REPRESENTATION_CONTEXT(
'ID1','3'));
#2267=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2268=DIRECTION('',(0.E0,0.E0,1.E0));
#2269=DIRECTION('',(1.E0,0.E0,0.E0));
#2272=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2273=DIRECTION('',(0.E0,0.E0,1.E0));
#2274=DIRECTION('',(1.E0,0.E0,0.E0));
#2277=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2278=DIRECTION('',(0.E0,0.E0,1.E0));
#2279=DIRECTION('',(1.E0,0.E0,0.E0));
#2282=SHAPE_REPRESENTATION_RELATIONSHIP('','',#2281,#2271);
#2283=SHAPE_REPRESENTATION_RELATIONSHIP('','',#2281,#2276);
#2284=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#2285=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#2284);
#2286=DESIGN_CONTEXT('',#2284,'design');
#2287=MECHANICAL_CONTEXT('',#2284,'mechanical');
#2288=PRODUCT('11123_ZGLOB_AL_30X30_A','11123_ZGLOB_AL_30X30_A','NOT SPECIFIED',
(#2287));
#2289=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('6','LAST_VERSION',
#2288,.MADE.);
#2298=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2299=DIRECTION('',(0.E0,0.E0,1.E0));
#2300=DIRECTION('',(1.E0,0.E0,0.E0));
#2301=AXIS2_PLACEMENT_3D('',#2298,#2299,#2300);
#2302=ITEM_DEFINED_TRANSFORMATION('','',#2280,#2301);
#2303=(REPRESENTATION_RELATIONSHIP('','',#2281,#2295)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2302)SHAPE_REPRESENTATION_RELATIONSHIP());
#2304=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2303,#2297);
#2307=CARTESIAN_POINT('',(0.E0,4.5E1,0.E0));
#2308=DIRECTION('',(0.E0,0.E0,1.E0));
#2309=DIRECTION('',(-1.E0,0.E0,0.E0));
#2310=AXIS2_PLACEMENT_3D('',#2307,#2308,#2309);
#2311=ITEM_DEFINED_TRANSFORMATION('','',#2280,#2310);
#2312=(REPRESENTATION_RELATIONSHIP('','',#2281,#2295)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2311)SHAPE_REPRESENTATION_RELATIONSHIP());
#2313=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2312,#2306);
#2314=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2315=DIRECTION('',(0.E0,0.E0,-1.E0));
#2316=DIRECTION('',(1.E0,0.E0,0.E0));
#2317=AXIS2_PLACEMENT_3D('',#2314,#2315,#2316);
#2319=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2320=DIRECTION('',(0.E0,0.E0,-1.E0));
#2321=DIRECTION('',(-1.E0,0.E0,0.E0));
#2322=AXIS2_PLACEMENT_3D('',#2319,#2320,#2321);
#2324=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2325=DIRECTION('',(0.E0,0.E0,1.E0));
#2326=DIRECTION('',(1.E0,0.E0,0.E0));
#2327=AXIS2_PLACEMENT_3D('',#2324,#2325,#2326);
#2329=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2330=DIRECTION('',(0.E0,0.E0,1.E0));
#2331=DIRECTION('',(-1.E0,0.E0,0.E0));
#2332=AXIS2_PLACEMENT_3D('',#2329,#2330,#2331);
#2334=DIRECTION('',(0.E0,0.E0,1.E0));
#2335=VECTOR('',#2334,1.E0);
#2336=CARTESIAN_POINT('',(7.15E0,0.E0,0.E0));
#2337=LINE('',#2336,#2335);
#2338=DIRECTION('',(0.E0,0.E0,1.E0));
#2339=VECTOR('',#2338,1.E0);
#2340=CARTESIAN_POINT('',(-7.15E0,0.E0,0.E0));
#2341=LINE('',#2340,#2339);
#2342=CARTESIAN_POINT('',(0.E0,0.E0,1.E0));
#2343=DIRECTION('',(0.E0,0.E0,-1.E0));
#2344=DIRECTION('',(1.E0,0.E0,0.E0));
#2345=AXIS2_PLACEMENT_3D('',#2342,#2343,#2344);
#2347=CARTESIAN_POINT('',(0.E0,0.E0,1.E0));
#2348=DIRECTION('',(0.E0,0.E0,-1.E0));
#2349=DIRECTION('',(-1.E0,0.E0,0.E0));
#2350=AXIS2_PLACEMENT_3D('',#2347,#2348,#2349);
#2352=CARTESIAN_POINT('',(0.E0,0.E0,1.E0));
#2353=DIRECTION('',(0.E0,0.E0,1.E0));
#2354=DIRECTION('',(1.E0,0.E0,0.E0));
#2355=AXIS2_PLACEMENT_3D('',#2352,#2353,#2354);
#2357=CARTESIAN_POINT('',(0.E0,0.E0,1.E0));
#2358=DIRECTION('',(0.E0,0.E0,1.E0));
#2359=DIRECTION('',(-1.E0,0.E0,0.E0));
#2360=AXIS2_PLACEMENT_3D('',#2357,#2358,#2359);
#2362=CARTESIAN_POINT('',(0.E0,9.E0,1.E0));
#2363=DIRECTION('',(0.E0,0.E0,1.E0));
#2364=DIRECTION('',(1.E0,0.E0,0.E0));
#2365=AXIS2_PLACEMENT_3D('',#2362,#2363,#2364);
#2367=CARTESIAN_POINT('',(0.E0,9.E0,1.E0));
#2368=DIRECTION('',(0.E0,0.E0,1.E0));
#2369=DIRECTION('',(-1.E0,0.E0,0.E0));
#2370=AXIS2_PLACEMENT_3D('',#2367,#2368,#2369);
#2372=CARTESIAN_POINT('',(0.E0,-9.E0,1.E0));
#2373=DIRECTION('',(0.E0,0.E0,1.E0));
#2374=DIRECTION('',(1.E0,0.E0,0.E0));
#2375=AXIS2_PLACEMENT_3D('',#2372,#2373,#2374);
#2377=CARTESIAN_POINT('',(0.E0,-9.E0,1.E0));
#2378=DIRECTION('',(0.E0,0.E0,1.E0));
#2379=DIRECTION('',(-1.E0,0.E0,0.E0));
#2380=AXIS2_PLACEMENT_3D('',#2377,#2378,#2379);
#2382=DIRECTION('',(0.E0,0.E0,1.E0));
#2383=VECTOR('',#2382,1.E0);
#2384=CARTESIAN_POINT('',(1.09E1,0.E0,0.E0));
#2385=LINE('',#2384,#2383);
#2386=DIRECTION('',(0.E0,0.E0,1.E0));
#2387=VECTOR('',#2386,1.E0);
#2388=CARTESIAN_POINT('',(-1.09E1,0.E0,0.E0));
#2389=LINE('',#2388,#2387);
#2390=DIRECTION('',(0.E0,0.E0,1.E0));
#2391=VECTOR('',#2390,1.2E0);
#2392=CARTESIAN_POINT('',(1.15E0,9.E0,1.E0));
#2393=LINE('',#2392,#2391);
#2394=DIRECTION('',(0.E0,0.E0,1.E0));
#2395=VECTOR('',#2394,1.2E0);
#2396=CARTESIAN_POINT('',(-1.15E0,9.E0,1.E0));
#2397=LINE('',#2396,#2395);
#2398=CARTESIAN_POINT('',(0.E0,9.E0,2.2E0));
#2399=DIRECTION('',(0.E0,0.E0,1.E0));
#2400=DIRECTION('',(1.E0,0.E0,0.E0));
#2401=AXIS2_PLACEMENT_3D('',#2398,#2399,#2400);
#2403=CARTESIAN_POINT('',(0.E0,9.E0,2.2E0));
#2404=DIRECTION('',(0.E0,0.E0,1.E0));
#2405=DIRECTION('',(-1.E0,0.E0,0.E0));
#2406=AXIS2_PLACEMENT_3D('',#2403,#2404,#2405);
#2408=CARTESIAN_POINT('',(0.E0,-9.E0,2.2E0));
#2409=DIRECTION('',(0.E0,0.E0,1.E0));
#2410=DIRECTION('',(1.E0,0.E0,0.E0));
#2411=AXIS2_PLACEMENT_3D('',#2408,#2409,#2410);
#2413=CARTESIAN_POINT('',(0.E0,-9.E0,2.2E0));
#2414=DIRECTION('',(0.E0,0.E0,1.E0));
#2415=DIRECTION('',(-1.E0,0.E0,0.E0));
#2416=AXIS2_PLACEMENT_3D('',#2413,#2414,#2415);
#2418=DIRECTION('',(0.E0,0.E0,1.E0));
#2419=VECTOR('',#2418,1.2E0);
#2420=CARTESIAN_POINT('',(1.15E0,-9.E0,1.E0));
#2421=LINE('',#2420,#2419);
#2422=DIRECTION('',(0.E0,0.E0,1.E0));
#2423=VECTOR('',#2422,1.2E0);
#2424=CARTESIAN_POINT('',(-1.15E0,-9.E0,1.E0));
#2425=LINE('',#2424,#2423);
#2426=CARTESIAN_POINT('',(7.15E0,0.E0,0.E0));
#2427=CARTESIAN_POINT('',(-7.15E0,0.E0,0.E0));
#2428=VERTEX_POINT('',#2426);
#2429=VERTEX_POINT('',#2427);
#2430=CARTESIAN_POINT('',(1.09E1,0.E0,0.E0));
#2431=CARTESIAN_POINT('',(-1.09E1,0.E0,0.E0));
#2432=VERTEX_POINT('',#2430);
#2433=VERTEX_POINT('',#2431);
#2434=CARTESIAN_POINT('',(7.15E0,0.E0,1.E0));
#2435=CARTESIAN_POINT('',(-7.15E0,0.E0,1.E0));
#2436=VERTEX_POINT('',#2434);
#2437=VERTEX_POINT('',#2435);
#2438=CARTESIAN_POINT('',(1.09E1,0.E0,1.E0));
#2439=CARTESIAN_POINT('',(-1.09E1,0.E0,1.E0));
#2440=VERTEX_POINT('',#2438);
#2441=VERTEX_POINT('',#2439);
#2442=CARTESIAN_POINT('',(1.15E0,9.E0,2.2E0));
#2443=CARTESIAN_POINT('',(-1.15E0,9.E0,2.2E0));
#2444=VERTEX_POINT('',#2442);
#2445=VERTEX_POINT('',#2443);
#2446=CARTESIAN_POINT('',(1.15E0,-9.E0,2.2E0));
#2447=CARTESIAN_POINT('',(-1.15E0,-9.E0,2.2E0));
#2448=VERTEX_POINT('',#2446);
#2449=VERTEX_POINT('',#2447);
#2450=CARTESIAN_POINT('',(1.15E0,9.E0,1.E0));
#2451=CARTESIAN_POINT('',(-1.15E0,9.E0,1.E0));
#2452=VERTEX_POINT('',#2450);
#2453=VERTEX_POINT('',#2451);
#2454=CARTESIAN_POINT('',(1.15E0,-9.E0,1.E0));
#2455=CARTESIAN_POINT('',(-1.15E0,-9.E0,1.E0));
#2456=VERTEX_POINT('',#2454);
#2457=VERTEX_POINT('',#2455);
#2458=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2459=DIRECTION('',(0.E0,0.E0,1.E0));
#2460=DIRECTION('',(1.E0,0.E0,0.E0));
#2461=AXIS2_PLACEMENT_3D('',#2458,#2459,#2460);
#2462=PLANE('',#2461);
#2464=ORIENTED_EDGE('',*,*,#2463,.T.);
#2466=ORIENTED_EDGE('',*,*,#2465,.T.);
#2467=EDGE_LOOP('',(#2464,#2466));
#2468=FACE_OUTER_BOUND('',#2467,.F.);
#2470=ORIENTED_EDGE('',*,*,#2469,.T.);
#2472=ORIENTED_EDGE('',*,*,#2471,.T.);
#2473=EDGE_LOOP('',(#2470,#2472));
#2474=FACE_BOUND('',#2473,.F.);
#2475=ADVANCED_FACE('',(#2468,#2474),#2462,.F.);
#2476=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2477=DIRECTION('',(0.E0,0.E0,1.E0));
#2478=DIRECTION('',(1.E0,0.E0,0.E0));
#2479=AXIS2_PLACEMENT_3D('',#2476,#2477,#2478);
#2480=CYLINDRICAL_SURFACE('',#2479,7.15E0);
#2481=ORIENTED_EDGE('',*,*,#2469,.F.);
#2483=ORIENTED_EDGE('',*,*,#2482,.T.);
#2485=ORIENTED_EDGE('',*,*,#2484,.T.);
#2487=ORIENTED_EDGE('',*,*,#2486,.F.);
#2488=EDGE_LOOP('',(#2481,#2483,#2485,#2487));
#2489=FACE_OUTER_BOUND('',#2488,.F.);
#2490=ADVANCED_FACE('',(#2489),#2480,.F.);
#2491=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2492=DIRECTION('',(0.E0,0.E0,1.E0));
#2493=DIRECTION('',(1.E0,0.E0,0.E0));
#2494=AXIS2_PLACEMENT_3D('',#2491,#2492,#2493);
#2495=CYLINDRICAL_SURFACE('',#2494,7.15E0);
#2496=ORIENTED_EDGE('',*,*,#2471,.F.);
#2497=ORIENTED_EDGE('',*,*,#2486,.T.);
#2499=ORIENTED_EDGE('',*,*,#2498,.T.);
#2500=ORIENTED_EDGE('',*,*,#2482,.F.);
#2501=EDGE_LOOP('',(#2496,#2497,#2499,#2500));
#2502=FACE_OUTER_BOUND('',#2501,.F.);
#2503=ADVANCED_FACE('',(#2502),#2495,.F.);
#2504=CARTESIAN_POINT('',(0.E0,0.E0,1.E0));
#2505=DIRECTION('',(0.E0,0.E0,1.E0));
#2506=DIRECTION('',(1.E0,0.E0,0.E0));
#2507=AXIS2_PLACEMENT_3D('',#2504,#2505,#2506);
#2508=PLANE('',#2507);
#2510=ORIENTED_EDGE('',*,*,#2509,.F.);
#2512=ORIENTED_EDGE('',*,*,#2511,.F.);
#2513=EDGE_LOOP('',(#2510,#2512));
#2514=FACE_OUTER_BOUND('',#2513,.F.);
#2515=ORIENTED_EDGE('',*,*,#2484,.F.);
#2516=ORIENTED_EDGE('',*,*,#2498,.F.);
#2517=EDGE_LOOP('',(#2515,#2516));
#2518=FACE_BOUND('',#2517,.F.);
#2520=ORIENTED_EDGE('',*,*,#2519,.T.);
#2522=ORIENTED_EDGE('',*,*,#2521,.T.);
#2523=EDGE_LOOP('',(#2520,#2522));
#2524=FACE_BOUND('',#2523,.F.);
#2526=ORIENTED_EDGE('',*,*,#2525,.T.);
#2528=ORIENTED_EDGE('',*,*,#2527,.T.);
#2529=EDGE_LOOP('',(#2526,#2528));
#2530=FACE_BOUND('',#2529,.F.);
#2531=ADVANCED_FACE('',(#2514,#2518,#2524,#2530),#2508,.T.);
#2532=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2533=DIRECTION('',(0.E0,0.E0,1.E0));
#2534=DIRECTION('',(1.E0,0.E0,0.E0));
#2535=AXIS2_PLACEMENT_3D('',#2532,#2533,#2534);
#2536=CYLINDRICAL_SURFACE('',#2535,1.09E1);
#2537=ORIENTED_EDGE('',*,*,#2463,.F.);
#2539=ORIENTED_EDGE('',*,*,#2538,.T.);
#2540=ORIENTED_EDGE('',*,*,#2509,.T.);
#2542=ORIENTED_EDGE('',*,*,#2541,.F.);
#2543=EDGE_LOOP('',(#2537,#2539,#2540,#2542));
#2544=FACE_OUTER_BOUND('',#2543,.F.);
#2545=ADVANCED_FACE('',(#2544),#2536,.T.);
#2546=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2547=DIRECTION('',(0.E0,0.E0,1.E0));
#2548=DIRECTION('',(1.E0,0.E0,0.E0));
#2549=AXIS2_PLACEMENT_3D('',#2546,#2547,#2548);
#2550=CYLINDRICAL_SURFACE('',#2549,1.09E1);
#2551=ORIENTED_EDGE('',*,*,#2465,.F.);
#2552=ORIENTED_EDGE('',*,*,#2541,.T.);
#2553=ORIENTED_EDGE('',*,*,#2511,.T.);
#2554=ORIENTED_EDGE('',*,*,#2538,.F.);
#2555=EDGE_LOOP('',(#2551,#2552,#2553,#2554));
#2556=FACE_OUTER_BOUND('',#2555,.F.);
#2557=ADVANCED_FACE('',(#2556),#2550,.T.);
#2558=CARTESIAN_POINT('',(0.E0,9.E0,1.E0));
#2559=DIRECTION('',(0.E0,0.E0,1.E0));
#2560=DIRECTION('',(1.E0,0.E0,0.E0));
#2561=AXIS2_PLACEMENT_3D('',#2558,#2559,#2560);
#2562=CYLINDRICAL_SURFACE('',#2561,1.15E0);
#2563=ORIENTED_EDGE('',*,*,#2519,.F.);
#2565=ORIENTED_EDGE('',*,*,#2564,.T.);
#2567=ORIENTED_EDGE('',*,*,#2566,.T.);
#2569=ORIENTED_EDGE('',*,*,#2568,.F.);
#2570=EDGE_LOOP('',(#2563,#2565,#2567,#2569));
#2571=FACE_OUTER_BOUND('',#2570,.F.);
#2572=ADVANCED_FACE('',(#2571),#2562,.T.);
#2573=CARTESIAN_POINT('',(0.E0,9.E0,1.E0));
#2574=DIRECTION('',(0.E0,0.E0,1.E0));
#2575=DIRECTION('',(1.E0,0.E0,0.E0));
#2576=AXIS2_PLACEMENT_3D('',#2573,#2574,#2575);
#2577=CYLINDRICAL_SURFACE('',#2576,1.15E0);
#2578=ORIENTED_EDGE('',*,*,#2521,.F.);
#2579=ORIENTED_EDGE('',*,*,#2568,.T.);
#2581=ORIENTED_EDGE('',*,*,#2580,.T.);
#2582=ORIENTED_EDGE('',*,*,#2564,.F.);
#2583=EDGE_LOOP('',(#2578,#2579,#2581,#2582));
#2584=FACE_OUTER_BOUND('',#2583,.F.);
#2585=ADVANCED_FACE('',(#2584),#2577,.T.);
#2586=CARTESIAN_POINT('',(0.E0,0.E0,2.2E0));
#2587=DIRECTION('',(0.E0,0.E0,1.E0));
#2588=DIRECTION('',(1.E0,0.E0,0.E0));
#2589=AXIS2_PLACEMENT_3D('',#2586,#2587,#2588);
#2590=PLANE('',#2589);
#2591=ORIENTED_EDGE('',*,*,#2566,.F.);
#2592=ORIENTED_EDGE('',*,*,#2580,.F.);
#2593=EDGE_LOOP('',(#2591,#2592));
#2594=FACE_OUTER_BOUND('',#2593,.F.);
#2595=ADVANCED_FACE('',(#2594),#2590,.T.);
#2596=CARTESIAN_POINT('',(0.E0,0.E0,2.2E0));
#2597=DIRECTION('',(0.E0,0.E0,1.E0));
#2598=DIRECTION('',(1.E0,0.E0,0.E0));
#2599=AXIS2_PLACEMENT_3D('',#2596,#2597,#2598);
#2600=PLANE('',#2599);
#2602=ORIENTED_EDGE('',*,*,#2601,.F.);
#2604=ORIENTED_EDGE('',*,*,#2603,.F.);
#2605=EDGE_LOOP('',(#2602,#2604));
#2606=FACE_OUTER_BOUND('',#2605,.F.);
#2607=ADVANCED_FACE('',(#2606),#2600,.T.);
#2608=CARTESIAN_POINT('',(0.E0,-9.E0,1.E0));
#2609=DIRECTION('',(0.E0,0.E0,1.E0));
#2610=DIRECTION('',(1.E0,0.E0,0.E0));
#2611=AXIS2_PLACEMENT_3D('',#2608,#2609,#2610);
#2612=CYLINDRICAL_SURFACE('',#2611,1.15E0);
#2613=ORIENTED_EDGE('',*,*,#2525,.F.);
#2615=ORIENTED_EDGE('',*,*,#2614,.T.);
#2616=ORIENTED_EDGE('',*,*,#2601,.T.);
#2618=ORIENTED_EDGE('',*,*,#2617,.F.);
#2619=EDGE_LOOP('',(#2613,#2615,#2616,#2618));
#2620=FACE_OUTER_BOUND('',#2619,.F.);
#2621=ADVANCED_FACE('',(#2620),#2612,.T.);
#2622=CARTESIAN_POINT('',(0.E0,-9.E0,1.E0));
#2623=DIRECTION('',(0.E0,0.E0,1.E0));
#2624=DIRECTION('',(1.E0,0.E0,0.E0));
#2625=AXIS2_PLACEMENT_3D('',#2622,#2623,#2624);
#2626=CYLINDRICAL_SURFACE('',#2625,1.15E0);
#2627=ORIENTED_EDGE('',*,*,#2527,.F.);
#2628=ORIENTED_EDGE('',*,*,#2617,.T.);
#2629=ORIENTED_EDGE('',*,*,#2603,.T.);
#2630=ORIENTED_EDGE('',*,*,#2614,.F.);
#2631=EDGE_LOOP('',(#2627,#2628,#2629,#2630));
#2632=FACE_OUTER_BOUND('',#2631,.F.);
#2633=ADVANCED_FACE('',(#2632),#2626,.T.);
#2634=CLOSED_SHELL('',(#2475,#2490,#2503,#2531,#2545,#2557,#2572,#2585,#2595,
#2607,#2621,#2633));
#2635=MANIFOLD_SOLID_BREP('',#2634);
#2636=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#2637=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#2638=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#2639=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#2638);
#2640=(CONVERSION_BASED_UNIT('DEGREE',#2639)NAMED_UNIT(#2637)PLANE_ANGLE_UNIT(
));
#2641=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#2642=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(3.090701499544E-3),#2636,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#2643=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#2642))GLOBAL_UNIT_ASSIGNED_CONTEXT((#2636,#2640,#2641))REPRESENTATION_CONTEXT(
'ID2','3'));
#2644=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2645=DIRECTION('',(0.E0,0.E0,1.E0));
#2646=DIRECTION('',(1.E0,0.E0,0.E0));
#2649=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#2650=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#2649);
#2651=DESIGN_CONTEXT('',#2649,'design');
#2652=MECHANICAL_CONTEXT('',#2649,'mechanical');
#2653=PRODUCT('11123_ZGLOB_AL_30X30_B','11123_ZGLOB_AL_30X30_B','NOT SPECIFIED',
(#2652));
#2654=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('2','LAST_VERSION',
#2653,.MADE.);
#2660=CARTESIAN_POINT('',(-1.05E1,2.25E1,0.E0));
#2661=DIRECTION('',(1.E0,0.E0,0.E0));
#2662=DIRECTION('',(0.E0,0.E0,1.E0));
#2663=AXIS2_PLACEMENT_3D('',#2660,#2661,#2662);
#2664=ITEM_DEFINED_TRANSFORMATION('','',#2647,#2663);
#2665=(REPRESENTATION_RELATIONSHIP('','',#2648,#2295)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2664)SHAPE_REPRESENTATION_RELATIONSHIP());
#2666=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2665,#2659);
#2669=CARTESIAN_POINT('',(1.05E1,2.25E1,0.E0));
#2670=DIRECTION('',(-1.E0,0.E0,0.E0));
#2671=DIRECTION('',(0.E0,0.E0,1.E0));
#2672=AXIS2_PLACEMENT_3D('',#2669,#2670,#2671);
#2673=ITEM_DEFINED_TRANSFORMATION('','',#2647,#2672);
#2674=(REPRESENTATION_RELATIONSHIP('','',#2648,#2295)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#2673)SHAPE_REPRESENTATION_RELATIONSHIP());
#2675=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#2674,#2668);
#2676=DIRECTION('',(0.E0,1.E0,0.E0));
#2677=VECTOR('',#2676,1.818520102572E0);
#2678=CARTESIAN_POINT('',(-1.E0,-5.484580658537E0,1.48E0));
#2679=LINE('',#2678,#2677);
#2680=DIRECTION('',(0.E0,1.E0,0.E0));
#2681=VECTOR('',#2680,1.818520102572E0);
#2682=CARTESIAN_POINT('',(-1.E0,3.666060555965E0,1.48E0));
#2683=LINE('',#2682,#2681);
#2684=CARTESIAN_POINT('',(0.E0,0.E0,1.48E0));
#2685=DIRECTION('',(0.E0,0.E0,-1.E0));
#2686=DIRECTION('',(-2.631578947368E-1,-9.647527778854E-1,0.E0));
#2687=AXIS2_PLACEMENT_3D('',#2684,#2685,#2686);
#2689=DIRECTION('',(0.E0,1.E0,0.E0));
#2690=VECTOR('',#2689,1.818520102572E0);
#2691=CARTESIAN_POINT('',(1.E0,-5.484580658537E0,1.48E0));
#2692=LINE('',#2691,#2690);
#2693=CARTESIAN_POINT('',(0.E0,0.E0,1.48E0));
#2694=DIRECTION('',(0.E0,0.E0,-1.E0));
#2695=DIRECTION('',(2.631578947368E-1,9.647527778854E-1,0.E0));
#2696=AXIS2_PLACEMENT_3D('',#2693,#2694,#2695);
#2698=DIRECTION('',(0.E0,1.E0,0.E0));
#2699=VECTOR('',#2698,1.818520102572E0);
#2700=CARTESIAN_POINT('',(1.E0,3.666060555965E0,1.48E0));
#2701=LINE('',#2700,#2699);
#2702=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2703=DIRECTION('',(0.E0,0.E0,-1.E0));
#2704=DIRECTION('',(0.E0,-1.E0,0.E0));
#2705=AXIS2_PLACEMENT_3D('',#2702,#2703,#2704);
#2707=DIRECTION('',(0.E0,0.E0,-1.E0));
#2708=VECTOR('',#2707,1.48E0);
#2709=CARTESIAN_POINT('',(-1.E0,-3.666060555965E0,1.48E0));
#2710=LINE('',#2709,#2708);
#2711=DIRECTION('',(0.E0,0.E0,-1.E0));
#2712=VECTOR('',#2711,1.48E0);
#2713=CARTESIAN_POINT('',(-1.E0,3.666060555965E0,1.48E0));
#2714=LINE('',#2713,#2712);
#2715=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2716=DIRECTION('',(0.E0,0.E0,-1.E0));
#2717=DIRECTION('',(-2.631578947368E-1,9.647527778854E-1,0.E0));
#2718=AXIS2_PLACEMENT_3D('',#2715,#2716,#2717);
#2720=CARTESIAN_POINT('',(0.E0,0.E0,-7.000011369561E-1));
#2721=DIRECTION('',(0.E0,0.E0,1.E0));
#2722=DIRECTION('',(0.E0,1.E0,0.E0));
#2723=AXIS2_PLACEMENT_3D('',#2720,#2721,#2722);
#2725=DIRECTION('',(1.525179527667E-9,7.497861692797E-7,9.999999999997E-1));
#2726=VECTOR('',#2725,6.999994749952E-1);
#2727=CARTESIAN_POINT('',(-1.067624071594E-9,-3.800000524850E0,
-6.999994749951E-1));
#2728=LINE('',#2727,#2726);
#2729=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2730=DIRECTION('',(0.E0,0.E0,-1.E0));
#2731=DIRECTION('',(0.E0,-1.E0,0.E0));
#2732=AXIS2_PLACEMENT_3D('',#2729,#2730,#2731);
#2734=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2735=DIRECTION('',(0.E0,0.E0,-1.E0));
#2736=DIRECTION('',(0.E0,1.E0,0.E0));
#2737=AXIS2_PLACEMENT_3D('',#2734,#2735,#2736);
#2739=DIRECTION('',(0.E0,-1.E0,0.E0));
#2740=VECTOR('',#2739,1.818520102572E0);
#2741=CARTESIAN_POINT('',(-1.E0,-3.666060555965E0,0.E0));
#2742=LINE('',#2741,#2740);
#2743=DIRECTION('',(0.E0,1.E0,0.E0));
#2744=VECTOR('',#2743,1.818520102572E0);
#2745=CARTESIAN_POINT('',(1.E0,-5.484580658537E0,0.E0));
#2746=LINE('',#2745,#2744);
#2747=DIRECTION('',(0.E0,1.E0,0.E0));
#2748=VECTOR('',#2747,1.818520102572E0);
#2749=CARTESIAN_POINT('',(1.E0,3.666060555965E0,0.E0));
#2750=LINE('',#2749,#2748);
#2751=DIRECTION('',(0.E0,-1.E0,0.E0));
#2752=VECTOR('',#2751,1.818520102572E0);
#2753=CARTESIAN_POINT('',(-1.E0,5.484580658537E0,0.E0));
#2754=LINE('',#2753,#2752);
#2755=CARTESIAN_POINT('',(0.E0,0.E0,-1.699999912627E0));
#2756=DIRECTION('',(0.E0,0.E0,-1.E0));
#2757=DIRECTION('',(0.E0,-1.E0,0.E0));
#2758=AXIS2_PLACEMENT_3D('',#2755,#2756,#2757);
#2760=DIRECTION('',(-1.303802743232E-11,2.564362632541E-8,-1.E0));
#2761=VECTOR('',#2760,1.699999825628E0);
#2762=CARTESIAN_POINT('',(0.E0,-7.7E0,0.E0));
#2763=LINE('',#2762,#2761);
#2764=DIRECTION('',(-1.390027070614E-13,-9.701424998707E-1,2.425356261348E-1));
#2765=VECTOR('',#2764,2.061552812809E0);
#2766=CARTESIAN_POINT('',(-2.187713999285E-11,-5.699999956972E0,
-2.199999827892E0));
#2767=LINE('',#2766,#2765);
#2768=CARTESIAN_POINT('',(0.E0,0.E0,-2.199997745345E0));
#2769=DIRECTION('',(0.E0,0.E0,1.E0));
#2770=DIRECTION('',(0.E0,-1.E0,0.E0));
#2771=AXIS2_PLACEMENT_3D('',#2768,#2769,#2770);
#2773=CARTESIAN_POINT('',(0.E0,0.E0,-2.199997745345E0));
#2774=DIRECTION('',(0.E0,0.E0,1.E0));
#2775=DIRECTION('',(0.E0,1.E0,0.E0));
#2776=AXIS2_PLACEMENT_3D('',#2773,#2774,#2775);
#2778=CARTESIAN_POINT('',(0.E0,0.E0,-2.199999802527E0));
#2779=DIRECTION('',(0.E0,0.E0,-1.E0));
#2780=DIRECTION('',(0.E0,-1.E0,0.E0));
#2781=AXIS2_PLACEMENT_3D('',#2778,#2779,#2780);
#2783=CARTESIAN_POINT('',(0.E0,0.E0,-2.199999802527E0));
#2784=DIRECTION('',(0.E0,0.E0,-1.E0));
#2785=DIRECTION('',(0.E0,1.E0,0.E0));
#2786=AXIS2_PLACEMENT_3D('',#2783,#2784,#2785);
#2788=DIRECTION('',(4.326474002781E-10,7.071069939094E-1,7.071065684636E-1));
#2789=VECTOR('',#2788,2.121320343466E0);
#2790=CARTESIAN_POINT('',(-1.985407803351E-9,-5.300000976037E0,
-2.199999023675E0));
#2791=LINE('',#2790,#2789);
#2792=DIRECTION('',(-4.326473166159E-10,-7.071069939094E-1,7.071065684636E-1));
#2793=VECTOR('',#2792,2.121320343466E0);
#2794=CARTESIAN_POINT('',(1.985408577038E-9,5.300000976037E0,
-2.199999023675E0));
#2795=LINE('',#2794,#2793);
#2796=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2797=DIRECTION('',(0.E0,0.E0,-1.E0));
#2798=DIRECTION('',(0.E0,1.E0,0.E0));
#2799=AXIS2_PLACEMENT_3D('',#2796,#2797,#2798);
#2801=DIRECTION('',(0.E0,0.E0,-1.E0));
#2802=VECTOR('',#2801,1.48E0);
#2803=CARTESIAN_POINT('',(1.E0,3.666060555965E0,1.48E0));
#2804=LINE('',#2803,#2802);
#2805=DIRECTION('',(0.E0,0.E0,-1.E0));
#2806=VECTOR('',#2805,1.48E0);
#2807=CARTESIAN_POINT('',(1.E0,-3.666060555965E0,1.48E0));
#2808=LINE('',#2807,#2806);
#2809=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2810=DIRECTION('',(0.E0,0.E0,-1.E0));
#2811=DIRECTION('',(2.631578947368E-1,-9.647527778854E-1,0.E0));
#2812=AXIS2_PLACEMENT_3D('',#2809,#2810,#2811);
#2814=CARTESIAN_POINT('',(0.E0,0.E0,-7.000011369561E-1));
#2815=DIRECTION('',(0.E0,0.E0,1.E0));
#2816=DIRECTION('',(0.E0,-1.E0,0.E0));
#2817=AXIS2_PLACEMENT_3D('',#2814,#2815,#2816);
#2819=DIRECTION('',(-1.525180412618E-9,-7.497861686453E-7,9.999999999997E-1));
#2820=VECTOR('',#2819,6.999994749952E-1);
#2821=CARTESIAN_POINT('',(1.067625022755E-9,3.800000524850E0,
-6.999994749951E-1));
#2822=LINE('',#2821,#2820);
#2823=CARTESIAN_POINT('',(0.E0,0.E0,1.48E0));
#2824=DIRECTION('',(0.E0,0.E0,1.E0));
#2825=DIRECTION('',(-1.793721973094E-1,9.837812840425E-1,0.E0));
#2826=AXIS2_PLACEMENT_3D('',#2823,#2824,#2825);
#2828=DIRECTION('',(0.E0,0.E0,1.E0));
#2829=VECTOR('',#2828,1.48E0);
#2830=CARTESIAN_POINT('',(-1.E0,-5.484580658537E0,0.E0));
#2831=LINE('',#2830,#2829);
#2832=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2833=DIRECTION('',(0.E0,0.E0,-1.E0));
#2834=DIRECTION('',(-1.793721973094E-1,-9.837812840425E-1,0.E0));
#2835=AXIS2_PLACEMENT_3D('',#2832,#2833,#2834);
#2837=DIRECTION('',(0.E0,0.E0,1.E0));
#2838=VECTOR('',#2837,1.48E0);
#2839=CARTESIAN_POINT('',(-1.E0,5.484580658537E0,0.E0));
#2840=LINE('',#2839,#2838);
#2841=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#2842=DIRECTION('',(0.E0,0.E0,-1.E0));
#2843=DIRECTION('',(1.793721973094E-1,9.837812840425E-1,0.E0));
#2844=AXIS2_PLACEMENT_3D('',#2841,#2842,#2843);
#2846=DIRECTION('',(0.E0,0.E0,1.E0));
#2847=VECTOR('',#2846,1.48E0);
#2848=CARTESIAN_POINT('',(1.E0,-5.484580658537E0,0.E0));
#2849=LINE('',#2848,#2847);
#2850=CARTESIAN_POINT('',(0.E0,0.E0,1.48E0));
#2851=DIRECTION('',(0.E0,0.E0,1.E0));
#2852=DIRECTION('',(1.793721973094E-1,-9.837812840425E-1,0.E0));
#2853=AXIS2_PLACEMENT_3D('',#2850,#2851,#2852);
#2855=DIRECTION('',(0.E0,0.E0,1.E0));
#2856=VECTOR('',#2855,1.48E0);
#2857=CARTESIAN_POINT('',(1.E0,5.484580658537E0,0.E0));
#2858=LINE('',#2857,#2856);
#2859=DIRECTION('',(1.393321090463E-13,9.701424998707E-1,2.425356261348E-1));
#2860=VECTOR('',#2859,2.061552812809E0);
#2861=CARTESIAN_POINT('',(2.187549793028E-11,5.699999956972E0,
-2.199999827892E0));
#2862=LINE('',#2861,#2860);
#2863=CARTESIAN_POINT('',(0.E0,0.E0,-1.699999912627E0));
#2864=DIRECTION('',(0.E0,0.E0,-1.E0));
#2865=DIRECTION('',(0.E0,1.E0,0.E0));
#2866=AXIS2_PLACEMENT_3D('',#2863,#2864,#2865);
#2868=DIRECTION('',(1.303746097169E-11,-2.564362632541E-8,-1.E0));
#2869=VECTOR('',#2868,1.699999825628E0);
#2870=CARTESIAN_POINT('',(0.E0,7.7E0,0.E0));
#2871=LINE('',#2870,#2869);
#2872=CARTESIAN_POINT('',(0.E0,-7.7E0,0.E0));
#2873=CARTESIAN_POINT('',(0.E0,7.7E0,0.E0));
#2874=VERTEX_POINT('',#2872);
#2875=VERTEX_POINT('',#2873);
#2876=CARTESIAN_POINT('',(0.E0,-5.300000673887E0,-2.199997745345E0));
#2877=CARTESIAN_POINT('',(0.E0,5.300000673887E0,-2.199997745345E0));
#2878=VERTEX_POINT('',#2876);
#2879=VERTEX_POINT('',#2877);
#2880=CARTESIAN_POINT('',(0.E0,-3.8E0,-7.000011369561E-1));
#2881=CARTESIAN_POINT('',(0.E0,3.8E0,-7.000011369561E-1));
#2882=VERTEX_POINT('',#2880);
#2883=VERTEX_POINT('',#2881);
#2884=CARTESIAN_POINT('',(0.E0,-5.699999692705E0,-2.199999802527E0));
#2885=CARTESIAN_POINT('',(0.E0,5.699999692705E0,-2.199999802527E0));
#2886=VERTEX_POINT('',#2884);
#2887=VERTEX_POINT('',#2885);
#2888=CARTESIAN_POINT('',(0.E0,-7.7E0,-1.699999912627E0));
#2889=CARTESIAN_POINT('',(0.E0,7.7E0,-1.699999912627E0));
#2890=VERTEX_POINT('',#2888);
#2891=VERTEX_POINT('',#2889);
#2892=CARTESIAN_POINT('',(-1.E0,-5.484580658537E0,1.48E0));
#2893=CARTESIAN_POINT('',(-1.E0,-3.666060555965E0,1.48E0));
#2894=VERTEX_POINT('',#2892);
#2895=VERTEX_POINT('',#2893);
#2896=CARTESIAN_POINT('',(-1.E0,3.666060555965E0,1.48E0));
#2897=CARTESIAN_POINT('',(-1.E0,5.484580658537E0,1.48E0));
#2898=VERTEX_POINT('',#2896);
#2899=VERTEX_POINT('',#2897);
#2900=CARTESIAN_POINT('',(1.E0,-5.484580658537E0,1.48E0));
#2901=CARTESIAN_POINT('',(1.E0,-3.666060555965E0,1.48E0));
#2902=VERTEX_POINT('',#2900);
#2903=VERTEX_POINT('',#2901);
#2904=CARTESIAN_POINT('',(1.E0,3.666060555965E0,1.48E0));
#2905=CARTESIAN_POINT('',(1.E0,5.484580658537E0,1.48E0));
#2906=VERTEX_POINT('',#2904);
#2907=VERTEX_POINT('',#2905);
#2908=CARTESIAN_POINT('',(-1.E0,5.484580658537E0,0.E0));
#2909=VERTEX_POINT('',#2908);
#2910=CARTESIAN_POINT('',(1.E0,5.484580658537E0,0.E0));
#2911=VERTEX_POINT('',#2910);
#2912=CARTESIAN_POINT('',(-1.E0,-5.484580658537E0,0.E0));
#2913=VERTEX_POINT('',#2912);
#2914=CARTESIAN_POINT('',(1.E0,-5.484580658537E0,0.E0));
#2915=VERTEX_POINT('',#2914);
#2916=CARTESIAN_POINT('',(0.E0,-3.8E0,0.E0));
#2917=CARTESIAN_POINT('',(-1.E0,-3.666060555965E0,0.E0));
#2918=VERTEX_POINT('',#2916);
#2919=VERTEX_POINT('',#2917);
#2920=CARTESIAN_POINT('',(-1.E0,3.666060555965E0,0.E0));
#2921=CARTESIAN_POINT('',(0.E0,3.8E0,0.E0));
#2922=VERTEX_POINT('',#2920);
#2923=VERTEX_POINT('',#2921);
#2924=CARTESIAN_POINT('',(1.E0,3.666060555965E0,0.E0));
#2925=VERTEX_POINT('',#2924);
#2926=CARTESIAN_POINT('',(1.E0,-3.666060555965E0,0.E0));
#2927=VERTEX_POINT('',#2926);
#2928=CARTESIAN_POINT('',(0.E0,0.E0,1.48E0));
#2929=DIRECTION('',(0.E0,0.E0,1.E0));
#2930=DIRECTION('',(1.E0,0.E0,0.E0));
#2931=AXIS2_PLACEMENT_3D('',#2928,#2929,#2930);
#2932=PLANE('',#2931);
#2934=ORIENTED_EDGE('',*,*,#2933,.F.);
#2936=ORIENTED_EDGE('',*,*,#2935,.F.);
#2938=ORIENTED_EDGE('',*,*,#2937,.F.);
#2940=ORIENTED_EDGE('',*,*,#2939,.F.);
#2941=EDGE_LOOP('',(#2934,#2936,#2938,#2940));
#2942=FACE_OUTER_BOUND('',#2941,.F.);
#2943=ADVANCED_FACE('',(#2942),#2932,.T.);
#2944=CARTESIAN_POINT('',(0.E0,0.E0,1.48E0));
#2945=DIRECTION('',(0.E0,0.E0,1.E0));
#2946=DIRECTION('',(1.E0,0.E0,0.E0));
#2947=AXIS2_PLACEMENT_3D('',#2944,#2945,#2946);
#2948=PLANE('',#2947);
#2950=ORIENTED_EDGE('',*,*,#2949,.T.);
#2952=ORIENTED_EDGE('',*,*,#2951,.F.);
#2954=ORIENTED_EDGE('',*,*,#2953,.T.);
#2956=ORIENTED_EDGE('',*,*,#2955,.F.);
#2957=EDGE_LOOP('',(#2950,#2952,#2954,#2956));
#2958=FACE_OUTER_BOUND('',#2957,.F.);
#2959=ADVANCED_FACE('',(#2958),#2948,.T.);
#2960=CARTESIAN_POINT('',(-1.E0,5.575E0,1.48E0));
#2961=DIRECTION('',(-1.E0,0.E0,0.E0));
#2962=DIRECTION('',(0.E0,-1.E0,0.E0));
#2963=AXIS2_PLACEMENT_3D('',#2960,#2961,#2962);
#2964=PLANE('',#2963);
#2965=ORIENTED_EDGE('',*,*,#2933,.T.);
#2967=ORIENTED_EDGE('',*,*,#2966,.T.);
#2969=ORIENTED_EDGE('',*,*,#2968,.T.);
#2971=ORIENTED_EDGE('',*,*,#2970,.T.);
#2972=EDGE_LOOP('',(#2965,#2967,#2969,#2971));
#2973=FACE_OUTER_BOUND('',#2972,.F.);
#2974=ADVANCED_FACE('',(#2973),#2964,.F.);
#2975=CARTESIAN_POINT('',(-1.E0,5.575E0,1.48E0));
#2976=DIRECTION('',(-1.E0,0.E0,0.E0));
#2977=DIRECTION('',(0.E0,-1.E0,0.E0));
#2978=AXIS2_PLACEMENT_3D('',#2975,#2976,#2977);
#2979=PLANE('',#2978);
#2980=ORIENTED_EDGE('',*,*,#2937,.T.);
#2982=ORIENTED_EDGE('',*,*,#2981,.F.);
#2984=ORIENTED_EDGE('',*,*,#2983,.T.);
#2986=ORIENTED_EDGE('',*,*,#2985,.F.);
#2987=EDGE_LOOP('',(#2980,#2982,#2984,#2986));
#2988=FACE_OUTER_BOUND('',#2987,.F.);
#2989=ADVANCED_FACE('',(#2988),#2979,.F.);
#2990=CARTESIAN_POINT('',(0.E0,0.E0,-2.2E0));
#2991=DIRECTION('',(0.E0,0.E0,-1.E0));
#2992=DIRECTION('',(0.E0,-1.E0,0.E0));
#2993=AXIS2_PLACEMENT_3D('',#2990,#2991,#2992);
#2994=CYLINDRICAL_SURFACE('',#2993,3.8E0);
#2996=ORIENTED_EDGE('',*,*,#2995,.T.);
#2997=ORIENTED_EDGE('',*,*,#2966,.F.);
#2998=ORIENTED_EDGE('',*,*,#2939,.T.);
#2999=ORIENTED_EDGE('',*,*,#2985,.T.);
#3001=ORIENTED_EDGE('',*,*,#3000,.T.);
#3003=ORIENTED_EDGE('',*,*,#3002,.F.);
#3005=ORIENTED_EDGE('',*,*,#3004,.T.);
#3007=ORIENTED_EDGE('',*,*,#3006,.T.);
#3008=EDGE_LOOP('',(#2996,#2997,#2998,#2999,#3001,#3003,#3005,#3007));
#3009=FACE_OUTER_BOUND('',#3008,.F.);
#3010=ADVANCED_FACE('',(#3009),#2994,.F.);
#3011=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#3012=DIRECTION('',(0.E0,0.E0,-1.E0));
#3013=DIRECTION('',(0.E0,-1.E0,0.E0));
#3014=AXIS2_PLACEMENT_3D('',#3011,#3012,#3013);
#3015=PLANE('',#3014);
#3017=ORIENTED_EDGE('',*,*,#3016,.T.);
#3019=ORIENTED_EDGE('',*,*,#3018,.T.);
#3020=EDGE_LOOP('',(#3017,#3019));
#3021=FACE_OUTER_BOUND('',#3020,.F.);
#3023=ORIENTED_EDGE('',*,*,#3022,.F.);
#3024=ORIENTED_EDGE('',*,*,#2968,.F.);
#3025=ORIENTED_EDGE('',*,*,#2995,.F.);
#3027=ORIENTED_EDGE('',*,*,#3026,.F.);
#3029=ORIENTED_EDGE('',*,*,#3028,.F.);
#3031=ORIENTED_EDGE('',*,*,#3030,.F.);
#3033=ORIENTED_EDGE('',*,*,#3032,.F.);
#3035=ORIENTED_EDGE('',*,*,#3034,.F.);
#3036=ORIENTED_EDGE('',*,*,#3000,.F.);
#3037=ORIENTED_EDGE('',*,*,#2983,.F.);
#3038=EDGE_LOOP('',(#3023,#3024,#3025,#3027,#3029,#3031,#3033,#3035,#3036,
#3037));
#3039=FACE_BOUND('',#3038,.F.);
#3040=ADVANCED_FACE('',(#3021,#3039),#3015,.F.);
#3041=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#3042=DIRECTION('',(0.E0,0.E0,-1.E0));
#3043=DIRECTION('',(0.E0,-1.E0,0.E0));
#3044=AXIS2_PLACEMENT_3D('',#3041,#3042,#3043);
#3045=CYLINDRICAL_SURFACE('',#3044,7.7E0);
#3047=ORIENTED_EDGE('',*,*,#3046,.T.);
#3049=ORIENTED_EDGE('',*,*,#3048,.F.);
#3050=ORIENTED_EDGE('',*,*,#3016,.F.);
#3052=ORIENTED_EDGE('',*,*,#3051,.T.);
#3053=EDGE_LOOP('',(#3047,#3049,#3050,#3052));
#3054=FACE_OUTER_BOUND('',#3053,.F.);
#3055=ADVANCED_FACE('',(#3054),#3045,.T.);
#3056=CARTESIAN_POINT('',(0.E0,0.E0,-1.950000081991E0));
#3057=DIRECTION('',(0.E0,0.E0,1.E0));
#3058=DIRECTION('',(0.E0,-1.E0,0.E0));
#3059=AXIS2_PLACEMENT_3D('',#3056,#3057,#3058);
#3060=CONICAL_SURFACE('',#3059,6.699998382359E0,7.596375393706E1);
#3062=ORIENTED_EDGE('',*,*,#3061,.T.);
#3064=ORIENTED_EDGE('',*,*,#3063,.T.);
#3065=ORIENTED_EDGE('',*,*,#3046,.F.);
#3067=ORIENTED_EDGE('',*,*,#3066,.F.);
#3068=EDGE_LOOP('',(#3062,#3064,#3065,#3067));
#3069=FACE_OUTER_BOUND('',#3068,.F.);
#3070=ADVANCED_FACE('',(#3069),#3060,.T.);
#3071=CARTESIAN_POINT('',(0.E0,0.E0,-2.2E0));
#3072=DIRECTION('',(0.E0,0.E0,-1.E0));
#3073=DIRECTION('',(0.E0,-1.E0,0.E0));
#3074=AXIS2_PLACEMENT_3D('',#3071,#3072,#3073);
#3075=PLANE('',#3074);
#3076=ORIENTED_EDGE('',*,*,#3061,.F.);
#3078=ORIENTED_EDGE('',*,*,#3077,.F.);
#3079=EDGE_LOOP('',(#3076,#3078));
#3080=FACE_OUTER_BOUND('',#3079,.F.);
#3082=ORIENTED_EDGE('',*,*,#3081,.F.);
#3084=ORIENTED_EDGE('',*,*,#3083,.F.);
#3085=EDGE_LOOP('',(#3082,#3084));
#3086=FACE_BOUND('',#3085,.F.);
#3087=ADVANCED_FACE('',(#3080,#3086),#3075,.T.);
#3088=CARTESIAN_POINT('',(0.E0,0.E0,-1.449999137240E0));
#3089=DIRECTION('',(0.E0,0.E0,-1.E0));
#3090=DIRECTION('',(0.E0,-1.E0,0.E0));
#3091=AXIS2_PLACEMENT_3D('',#3088,#3089,#3090);
#3092=CONICAL_SURFACE('',#3091,4.550001651367E0,4.500001582954E1);
#3093=ORIENTED_EDGE('',*,*,#3081,.T.);
#3095=ORIENTED_EDGE('',*,*,#3094,.T.);
#3097=ORIENTED_EDGE('',*,*,#3096,.F.);
#3099=ORIENTED_EDGE('',*,*,#3098,.F.);
#3100=EDGE_LOOP('',(#3093,#3095,#3097,#3099));
#3101=FACE_OUTER_BOUND('',#3100,.F.);
#3102=ADVANCED_FACE('',(#3101),#3092,.F.);
#3103=CARTESIAN_POINT('',(0.E0,0.E0,-1.449999137240E0));
#3104=DIRECTION('',(0.E0,0.E0,-1.E0));
#3105=DIRECTION('',(0.E0,-1.E0,0.E0));
#3106=AXIS2_PLACEMENT_3D('',#3103,#3104,#3105);
#3107=CONICAL_SURFACE('',#3106,4.550001651367E0,4.500001582954E1);
#3108=ORIENTED_EDGE('',*,*,#3083,.T.);
#3109=ORIENTED_EDGE('',*,*,#3098,.T.);
#3110=ORIENTED_EDGE('',*,*,#3004,.F.);
#3111=ORIENTED_EDGE('',*,*,#3094,.F.);
#3112=EDGE_LOOP('',(#3108,#3109,#3110,#3111));
#3113=FACE_OUTER_BOUND('',#3112,.F.);
#3114=ADVANCED_FACE('',(#3113),#3107,.F.);
#3115=CARTESIAN_POINT('',(0.E0,0.E0,-2.2E0));
#3116=DIRECTION('',(0.E0,0.E0,-1.E0));
#3117=DIRECTION('',(0.E0,-1.E0,0.E0));
#3118=AXIS2_PLACEMENT_3D('',#3115,#3116,#3117);
#3119=CYLINDRICAL_SURFACE('',#3118,3.8E0);
#3120=ORIENTED_EDGE('',*,*,#3034,.T.);
#3122=ORIENTED_EDGE('',*,*,#3121,.F.);
#3123=ORIENTED_EDGE('',*,*,#2951,.T.);
#3125=ORIENTED_EDGE('',*,*,#3124,.T.);
#3126=ORIENTED_EDGE('',*,*,#3026,.T.);
#3127=ORIENTED_EDGE('',*,*,#3006,.F.);
#3128=ORIENTED_EDGE('',*,*,#3096,.T.);
#3129=ORIENTED_EDGE('',*,*,#3002,.T.);
#3130=EDGE_LOOP('',(#3120,#3122,#3123,#3125,#3126,#3127,#3128,#3129));
#3131=FACE_OUTER_BOUND('',#3130,.F.);
#3132=ADVANCED_FACE('',(#3131),#3119,.F.);
#3133=CARTESIAN_POINT('',(1.E0,-5.575E0,1.48E0));
#3134=DIRECTION('',(1.E0,0.E0,0.E0));
#3135=DIRECTION('',(0.E0,1.E0,0.E0));
#3136=AXIS2_PLACEMENT_3D('',#3133,#3134,#3135);
#3137=PLANE('',#3136);
#3138=ORIENTED_EDGE('',*,*,#2949,.F.);
#3140=ORIENTED_EDGE('',*,*,#3139,.F.);
#3141=ORIENTED_EDGE('',*,*,#3028,.T.);
#3142=ORIENTED_EDGE('',*,*,#3124,.F.);
#3143=EDGE_LOOP('',(#3138,#3140,#3141,#3142));
#3144=FACE_OUTER_BOUND('',#3143,.F.);
#3145=ADVANCED_FACE('',(#3144),#3137,.F.);
#3146=CARTESIAN_POINT('',(1.E0,-5.575E0,1.48E0));
#3147=DIRECTION('',(1.E0,0.E0,0.E0));
#3148=DIRECTION('',(0.E0,1.E0,0.E0));
#3149=AXIS2_PLACEMENT_3D('',#3146,#3147,#3148);
#3150=PLANE('',#3149);
#3151=ORIENTED_EDGE('',*,*,#2953,.F.);
#3152=ORIENTED_EDGE('',*,*,#3121,.T.);
#3153=ORIENTED_EDGE('',*,*,#3032,.T.);
#3155=ORIENTED_EDGE('',*,*,#3154,.T.);
#3156=EDGE_LOOP('',(#3151,#3152,#3153,#3155));
#3157=FACE_OUTER_BOUND('',#3156,.F.);
#3158=ADVANCED_FACE('',(#3157),#3150,.F.);
#3159=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#3160=DIRECTION('',(0.E0,0.E0,1.E0));
#3161=DIRECTION('',(1.E0,0.E0,0.E0));
#3162=AXIS2_PLACEMENT_3D('',#3159,#3160,#3161);
#3163=CYLINDRICAL_SURFACE('',#3162,5.575E0);
#3164=ORIENTED_EDGE('',*,*,#2935,.T.);
#3165=ORIENTED_EDGE('',*,*,#2970,.F.);
#3166=ORIENTED_EDGE('',*,*,#3022,.T.);
#3167=ORIENTED_EDGE('',*,*,#2981,.T.);
#3168=EDGE_LOOP('',(#3164,#3165,#3166,#3167));
#3169=FACE_OUTER_BOUND('',#3168,.F.);
#3170=ADVANCED_FACE('',(#3169),#3163,.T.);
#3171=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#3172=DIRECTION('',(0.E0,0.E0,1.E0));
#3173=DIRECTION('',(1.E0,0.E0,0.E0));
#3174=AXIS2_PLACEMENT_3D('',#3171,#3172,#3173);
#3175=CYLINDRICAL_SURFACE('',#3174,5.575E0);
#3176=ORIENTED_EDGE('',*,*,#3030,.T.);
#3177=ORIENTED_EDGE('',*,*,#3139,.T.);
#3178=ORIENTED_EDGE('',*,*,#2955,.T.);
#3179=ORIENTED_EDGE('',*,*,#3154,.F.);
#3180=EDGE_LOOP('',(#3176,#3177,#3178,#3179));
#3181=FACE_OUTER_BOUND('',#3180,.F.);
#3182=ADVANCED_FACE('',(#3181),#3175,.T.);
#3183=CARTESIAN_POINT('',(0.E0,0.E0,-1.950000081991E0));
#3184=DIRECTION('',(0.E0,0.E0,1.E0));
#3185=DIRECTION('',(0.E0,-1.E0,0.E0));
#3186=AXIS2_PLACEMENT_3D('',#3183,#3184,#3185);
#3187=CONICAL_SURFACE('',#3186,6.699998382359E0,7.596375393706E1);
#3188=ORIENTED_EDGE('',*,*,#3077,.T.);
#3189=ORIENTED_EDGE('',*,*,#3066,.T.);
#3191=ORIENTED_EDGE('',*,*,#3190,.F.);
#3192=ORIENTED_EDGE('',*,*,#3063,.F.);
#3193=EDGE_LOOP('',(#3188,#3189,#3191,#3192));
#3194=FACE_OUTER_BOUND('',#3193,.F.);
#3195=ADVANCED_FACE('',(#3194),#3187,.T.);
#3196=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#3197=DIRECTION('',(0.E0,0.E0,-1.E0));
#3198=DIRECTION('',(0.E0,-1.E0,0.E0));
#3199=AXIS2_PLACEMENT_3D('',#3196,#3197,#3198);
#3200=CYLINDRICAL_SURFACE('',#3199,7.7E0);
#3201=ORIENTED_EDGE('',*,*,#3190,.T.);
#3202=ORIENTED_EDGE('',*,*,#3051,.F.);
#3203=ORIENTED_EDGE('',*,*,#3018,.F.);
#3204=ORIENTED_EDGE('',*,*,#3048,.T.);
#3205=EDGE_LOOP('',(#3201,#3202,#3203,#3204));
#3206=FACE_OUTER_BOUND('',#3205,.F.);
#3207=ADVANCED_FACE('',(#3206),#3200,.T.);
#3208=CLOSED_SHELL('',(#2943,#2959,#2974,#2989,#3010,#3040,#3055,#3070,#3087,
#3102,#3114,#3132,#3145,#3158,#3170,#3182,#3195,#3207));
#3209=MANIFOLD_SOLID_BREP('',#3208);
#3210=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#3211=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#3212=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#3213=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#3212);
#3214=(CONVERSION_BASED_UNIT('DEGREE',#3213)NAMED_UNIT(#3211)PLANE_ANGLE_UNIT(
));
#3215=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#3216=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(2.209299984560E-3),#3210,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#3217=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#3216))GLOBAL_UNIT_ASSIGNED_CONTEXT((#3210,#3214,#3215))REPRESENTATION_CONTEXT(
'ID3','3'));
#3218=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#3219=DIRECTION('',(0.E0,0.E0,1.E0));
#3220=DIRECTION('',(1.E0,0.E0,0.E0));
#3223=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#3224=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#3223);
#3225=DESIGN_CONTEXT('',#3223,'design');
#3226=MECHANICAL_CONTEXT('',#3223,'mechanical');
#3227=PRODUCT('11123_ZGLOB_AL_30X30_C','11123_ZGLOB_AL_30X30_C','NOT SPECIFIED',
(#3226));
#3228=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('1','LAST_VERSION',
#3227,.MADE.);
#3234=CARTESIAN_POINT('',(1.29E1,2.25E1,0.E0));
#3235=DIRECTION('',(-1.E0,0.E0,0.E0));
#3236=DIRECTION('',(0.E0,0.E0,1.E0));
#3237=AXIS2_PLACEMENT_3D('',#3234,#3235,#3236);
#3238=ITEM_DEFINED_TRANSFORMATION('','',#3221,#3237);
#3239=(REPRESENTATION_RELATIONSHIP('','',#3222,#2295)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3238)SHAPE_REPRESENTATION_RELATIONSHIP());
#3240=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3239,#3233);
#3243=CARTESIAN_POINT('',(-1.29E1,2.25E1,0.E0));
#3244=DIRECTION('',(1.E0,0.E0,0.E0));
#3245=DIRECTION('',(0.E0,0.E0,1.E0));
#3246=AXIS2_PLACEMENT_3D('',#3243,#3244,#3245);
#3247=ITEM_DEFINED_TRANSFORMATION('','',#3221,#3246);
#3248=(REPRESENTATION_RELATIONSHIP('','',#3222,#2295)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3247)SHAPE_REPRESENTATION_RELATIONSHIP());
#3249=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3248,#3242);
#3250=CARTESIAN_POINT('',(0.E0,-8.199999683120E0,0.E0));
#3251=DIRECTION('',(0.E0,1.E0,0.E0));
#3252=DIRECTION('',(1.E0,0.E0,0.E0));
#3253=AXIS2_PLACEMENT_3D('',#3250,#3251,#3252);
#3255=CARTESIAN_POINT('',(0.E0,-8.199999683120E0,0.E0));
#3256=DIRECTION('',(0.E0,1.E0,0.E0));
#3257=DIRECTION('',(-1.E0,0.E0,0.E0));
#3258=AXIS2_PLACEMENT_3D('',#3255,#3256,#3257);
#3260=DIRECTION('',(-7.071068104248E-1,-7.071067519483E-1,-5.946988961804E-12));
#3261=VECTOR('',#3260,7.071067811879E-1);
#3262=CARTESIAN_POINT('',(2.499999689867E0,-7.699999689896E0,
-6.307967144434E-11));
#3263=LINE('',#3262,#3261);
#3264=CARTESIAN_POINT('',(0.E0,-7.699999549825E0,0.E0));
#3265=DIRECTION('',(0.E0,1.E0,0.E0));
#3266=DIRECTION('',(1.E0,0.E0,0.E0));
#3267=AXIS2_PLACEMENT_3D('',#3264,#3265,#3266);
#3269=DIRECTION('',(5.851564565063E-8,1.E0,1.190188326165E-11));
#3270=VECTOR('',#3269,5.299999689896E0);
#3271=CARTESIAN_POINT('',(2.499999689867E0,-7.699999689896E0,
-6.307967144434E-11));
#3272=LINE('',#3271,#3270);
#3273=DIRECTION('',(-5.851564548305E-8,1.E0,-1.190188976811E-11));
#3274=VECTOR('',#3273,5.299999689896E0);
#3275=CARTESIAN_POINT('',(-2.499999689867E0,-7.699999689896E0,
6.307970592859E-11));
#3276=LINE('',#3275,#3274);
#3277=CARTESIAN_POINT('',(0.E0,-7.699999549825E0,0.E0));
#3278=DIRECTION('',(0.E0,1.E0,0.E0));
#3279=DIRECTION('',(-1.E0,0.E0,0.E0));
#3280=AXIS2_PLACEMENT_3D('',#3277,#3278,#3279);
#3282=DIRECTION('',(7.071068104248E-1,-7.071067519483E-1,5.947243427727E-12));
#3283=VECTOR('',#3282,7.071067811879E-1);
#3284=CARTESIAN_POINT('',(-2.499999689867E0,-7.699999689896E0,
6.307970592859E-11));
#3285=LINE('',#3284,#3283);
#3286=CARTESIAN_POINT('',(0.E0,-2.4E0,0.E0));
#3287=DIRECTION('',(0.E0,-1.E0,0.E0));
#3288=DIRECTION('',(1.E0,0.E0,0.E0));
#3289=AXIS2_PLACEMENT_3D('',#3286,#3287,#3288);
#3291=DIRECTION('',(7.071067811865E-1,7.071067811865E-1,0.E0));
#3292=VECTOR('',#3291,3.394112549695E0);
#3293=CARTESIAN_POINT('',(2.5E0,-2.4E0,0.E0));
#3294=LINE('',#3293,#3292);
#3295=DIRECTION('',(-7.071067811865E-1,7.071067811865E-1,0.E0));
#3296=VECTOR('',#3295,3.394112549695E0);
#3297=CARTESIAN_POINT('',(-2.5E0,-2.4E0,0.E0));
#3298=LINE('',#3297,#3296);
#3299=CARTESIAN_POINT('',(0.E0,-2.4E0,0.E0));
#3300=DIRECTION('',(0.E0,1.E0,0.E0));
#3301=DIRECTION('',(1.E0,0.E0,0.E0));
#3302=AXIS2_PLACEMENT_3D('',#3299,#3300,#3301);
#3304=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#3305=DIRECTION('',(0.E0,1.E0,0.E0));
#3306=DIRECTION('',(1.E0,0.E0,0.E0));
#3307=AXIS2_PLACEMENT_3D('',#3304,#3305,#3306);
#3309=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#3310=DIRECTION('',(0.E0,-1.E0,0.E0));
#3311=DIRECTION('',(1.E0,0.E0,0.E0));
#3312=AXIS2_PLACEMENT_3D('',#3309,#3310,#3311);
#3314=DIRECTION('',(-8.660254037844E-1,0.E0,-5.E-1));
#3315=VECTOR('',#3314,1.732050807569E0);
#3316=CARTESIAN_POINT('',(1.5E0,0.E0,-8.660254037844E-1));
#3317=LINE('',#3316,#3315);
#3318=DIRECTION('',(-8.660254037844E-1,0.E0,5.E-1));
#3319=VECTOR('',#3318,1.732050807569E0);
#3320=CARTESIAN_POINT('',(0.E0,0.E0,-1.732050807569E0));
#3321=LINE('',#3320,#3319);
#3322=DIRECTION('',(0.E0,0.E0,1.E0));
#3323=VECTOR('',#3322,1.732050807569E0);
#3324=CARTESIAN_POINT('',(-1.5E0,0.E0,-8.660254037844E-1));
#3325=LINE('',#3324,#3323);
#3326=DIRECTION('',(8.660254037844E-1,0.E0,5.E-1));
#3327=VECTOR('',#3326,1.732050807569E0);
#3328=CARTESIAN_POINT('',(-1.5E0,0.E0,8.660254037844E-1));
#3329=LINE('',#3328,#3327);
#3330=DIRECTION('',(8.660254037844E-1,0.E0,-5.E-1));
#3331=VECTOR('',#3330,1.732050807569E0);
#3332=CARTESIAN_POINT('',(0.E0,0.E0,1.732050807569E0));
#3333=LINE('',#3332,#3331);
#3334=DIRECTION('',(0.E0,0.E0,-1.E0));
#3335=VECTOR('',#3334,1.732050807569E0);
#3336=CARTESIAN_POINT('',(1.5E0,0.E0,8.660254037844E-1));
#3337=LINE('',#3336,#3335);
#3338=DIRECTION('',(0.E0,-1.E0,0.E0));
#3339=VECTOR('',#3338,3.E0);
#3340=CARTESIAN_POINT('',(1.5E0,0.E0,-8.660254037844E-1));
#3341=LINE('',#3340,#3339);
#3342=DIRECTION('',(0.E0,-1.E0,0.E0));
#3343=VECTOR('',#3342,3.E0);
#3344=CARTESIAN_POINT('',(1.5E0,0.E0,8.660254037844E-1));
#3345=LINE('',#3344,#3343);
#3346=DIRECTION('',(0.E0,-1.E0,0.E0));
#3347=VECTOR('',#3346,3.E0);
#3348=CARTESIAN_POINT('',(0.E0,0.E0,1.732050807569E0));
#3349=LINE('',#3348,#3347);
#3350=DIRECTION('',(0.E0,-1.E0,0.E0));
#3351=VECTOR('',#3350,3.E0);
#3352=CARTESIAN_POINT('',(-1.5E0,0.E0,8.660254037844E-1));
#3353=LINE('',#3352,#3351);
#3354=DIRECTION('',(0.E0,-1.E0,0.E0));
#3355=VECTOR('',#3354,3.E0);
#3356=CARTESIAN_POINT('',(-1.5E0,0.E0,-8.660254037844E-1));
#3357=LINE('',#3356,#3355);
#3358=DIRECTION('',(0.E0,-1.E0,0.E0));
#3359=VECTOR('',#3358,3.E0);
#3360=CARTESIAN_POINT('',(0.E0,0.E0,-1.732050807569E0));
#3361=LINE('',#3360,#3359);
#3362=DIRECTION('',(-8.660254037844E-1,0.E0,-5.E-1));
#3363=VECTOR('',#3362,1.732050807569E0);
#3364=CARTESIAN_POINT('',(1.5E0,-3.E0,-8.660254037844E-1));
#3365=LINE('',#3364,#3363);
#3366=DIRECTION('',(0.E0,0.E0,-1.E0));
#3367=VECTOR('',#3366,1.732050807569E0);
#3368=CARTESIAN_POINT('',(1.5E0,-3.E0,8.660254037844E-1));
#3369=LINE('',#3368,#3367);
#3370=DIRECTION('',(8.660254037844E-1,0.E0,-5.E-1));
#3371=VECTOR('',#3370,1.732050807569E0);
#3372=CARTESIAN_POINT('',(0.E0,-3.E0,1.732050807569E0));
#3373=LINE('',#3372,#3371);
#3374=DIRECTION('',(8.660254037844E-1,0.E0,5.E-1));
#3375=VECTOR('',#3374,1.732050807569E0);
#3376=CARTESIAN_POINT('',(-1.5E0,-3.E0,8.660254037844E-1));
#3377=LINE('',#3376,#3375);
#3378=DIRECTION('',(0.E0,0.E0,1.E0));
#3379=VECTOR('',#3378,1.732050807569E0);
#3380=CARTESIAN_POINT('',(-1.5E0,-3.E0,-8.660254037844E-1));
#3381=LINE('',#3380,#3379);
#3382=DIRECTION('',(-8.660254037844E-1,0.E0,5.E-1));
#3383=VECTOR('',#3382,1.732050807569E0);
#3384=CARTESIAN_POINT('',(0.E0,-3.E0,-1.732050807569E0));
#3385=LINE('',#3384,#3383);
#3386=CARTESIAN_POINT('',(2.5E0,-2.4E0,0.E0));
#3387=CARTESIAN_POINT('',(4.9E0,0.E0,0.E0));
#3388=VERTEX_POINT('',#3386);
#3389=VERTEX_POINT('',#3387);
#3390=CARTESIAN_POINT('',(-2.5E0,-2.4E0,0.E0));
#3391=CARTESIAN_POINT('',(-4.9E0,0.E0,0.E0));
#3392=VERTEX_POINT('',#3390);
#3393=VERTEX_POINT('',#3391);
#3394=CARTESIAN_POINT('',(2.5E0,-7.699999549825E0,0.E0));
#3395=CARTESIAN_POINT('',(-2.5E0,-7.699999549825E0,0.E0));
#3396=VERTEX_POINT('',#3394);
#3397=VERTEX_POINT('',#3395);
#3398=CARTESIAN_POINT('',(1.999999324502E0,-8.199999683120E0,0.E0));
#3399=CARTESIAN_POINT('',(-1.999999324502E0,-8.199999683120E0,0.E0));
#3400=VERTEX_POINT('',#3398);
#3401=VERTEX_POINT('',#3399);
#3402=CARTESIAN_POINT('',(1.5E0,-3.E0,-8.660254037844E-1));
#3403=CARTESIAN_POINT('',(0.E0,-3.E0,-1.732050807569E0));
#3404=VERTEX_POINT('',#3402);
#3405=VERTEX_POINT('',#3403);
#3406=CARTESIAN_POINT('',(-1.5E0,-3.E0,-8.660254037844E-1));
#3407=VERTEX_POINT('',#3406);
#3408=CARTESIAN_POINT('',(-1.5E0,-3.E0,8.660254037844E-1));
#3409=VERTEX_POINT('',#3408);
#3410=CARTESIAN_POINT('',(0.E0,-3.E0,1.732050807569E0));
#3411=VERTEX_POINT('',#3410);
#3412=CARTESIAN_POINT('',(1.5E0,-3.E0,8.660254037844E-1));
#3413=VERTEX_POINT('',#3412);
#3414=CARTESIAN_POINT('',(1.5E0,0.E0,-8.660254037844E-1));
#3415=CARTESIAN_POINT('',(0.E0,0.E0,-1.732050807569E0));
#3416=VERTEX_POINT('',#3414);
#3417=VERTEX_POINT('',#3415);
#3418=CARTESIAN_POINT('',(-1.5E0,0.E0,-8.660254037844E-1));
#3419=VERTEX_POINT('',#3418);
#3420=CARTESIAN_POINT('',(-1.5E0,0.E0,8.660254037844E-1));
#3421=VERTEX_POINT('',#3420);
#3422=CARTESIAN_POINT('',(0.E0,0.E0,1.732050807569E0));
#3423=VERTEX_POINT('',#3422);
#3424=CARTESIAN_POINT('',(1.5E0,0.E0,8.660254037844E-1));
#3425=VERTEX_POINT('',#3424);
#3426=CARTESIAN_POINT('',(0.E0,-8.2E0,0.E0));
#3427=DIRECTION('',(0.E0,-1.E0,0.E0));
#3428=DIRECTION('',(-1.E0,0.E0,0.E0));
#3429=AXIS2_PLACEMENT_3D('',#3426,#3427,#3428);
#3430=PLANE('',#3429);
#3432=ORIENTED_EDGE('',*,*,#3431,.T.);
#3434=ORIENTED_EDGE('',*,*,#3433,.T.);
#3435=EDGE_LOOP('',(#3432,#3434));
#3436=FACE_OUTER_BOUND('',#3435,.F.);
#3437=ADVANCED_FACE('',(#3436),#3430,.T.);
#3438=CARTESIAN_POINT('',(0.E0,-7.949999216815E0,0.E0));
#3439=DIRECTION('',(0.E0,1.E0,0.E0));
#3440=DIRECTION('',(0.E0,0.E0,-1.E0));
#3441=AXIS2_PLACEMENT_3D('',#3438,#3439,#3440);
#3442=CONICAL_SURFACE('',#3441,2.249999666759E0,4.499998578523E1);
#3444=ORIENTED_EDGE('',*,*,#3443,.T.);
#3446=ORIENTED_EDGE('',*,*,#3445,.T.);
#3447=ORIENTED_EDGE('',*,*,#3431,.F.);
#3449=ORIENTED_EDGE('',*,*,#3448,.F.);
#3450=EDGE_LOOP('',(#3444,#3446,#3447,#3449));
#3451=FACE_OUTER_BOUND('',#3450,.F.);
#3452=ADVANCED_FACE('',(#3451),#3442,.T.);
#3453=CARTESIAN_POINT('',(0.E0,4.1E-1,0.E0));
#3454=DIRECTION('',(0.E0,-1.E0,0.E0));
#3455=DIRECTION('',(-1.E0,0.E0,0.E0));
#3456=AXIS2_PLACEMENT_3D('',#3453,#3454,#3455);
#3457=CYLINDRICAL_SURFACE('',#3456,2.5E0);
#3458=ORIENTED_EDGE('',*,*,#3443,.F.);
#3460=ORIENTED_EDGE('',*,*,#3459,.T.);
#3462=ORIENTED_EDGE('',*,*,#3461,.T.);
#3464=ORIENTED_EDGE('',*,*,#3463,.F.);
#3465=EDGE_LOOP('',(#3458,#3460,#3462,#3464));
#3466=FACE_OUTER_BOUND('',#3465,.F.);
#3467=ADVANCED_FACE('',(#3466),#3457,.T.);
#3468=CARTESIAN_POINT('',(0.E0,4.1E-1,0.E0));
#3469=DIRECTION('',(0.E0,-1.E0,0.E0));
#3470=DIRECTION('',(-1.E0,0.E0,0.E0));
#3471=AXIS2_PLACEMENT_3D('',#3468,#3469,#3470);
#3472=CYLINDRICAL_SURFACE('',#3471,2.5E0);
#3474=ORIENTED_EDGE('',*,*,#3473,.F.);
#3475=ORIENTED_EDGE('',*,*,#3463,.T.);
#3477=ORIENTED_EDGE('',*,*,#3476,.F.);
#3478=ORIENTED_EDGE('',*,*,#3459,.F.);
#3479=EDGE_LOOP('',(#3474,#3475,#3477,#3478));
#3480=FACE_OUTER_BOUND('',#3479,.F.);
#3481=ADVANCED_FACE('',(#3480),#3472,.T.);
#3482=CARTESIAN_POINT('',(0.E0,-7.949999216815E0,0.E0));
#3483=DIRECTION('',(0.E0,1.E0,0.E0));
#3484=DIRECTION('',(0.E0,0.E0,-1.E0));
#3485=AXIS2_PLACEMENT_3D('',#3482,#3483,#3484);
#3486=CONICAL_SURFACE('',#3485,2.249999666759E0,4.499998578523E1);
#3487=ORIENTED_EDGE('',*,*,#3473,.T.);
#3488=ORIENTED_EDGE('',*,*,#3448,.T.);
#3489=ORIENTED_EDGE('',*,*,#3433,.F.);
#3490=ORIENTED_EDGE('',*,*,#3445,.F.);
#3491=EDGE_LOOP('',(#3487,#3488,#3489,#3490));
#3492=FACE_OUTER_BOUND('',#3491,.F.);
#3493=ADVANCED_FACE('',(#3492),#3486,.T.);
#3494=CARTESIAN_POINT('',(0.E0,-1.2E0,0.E0));
#3495=DIRECTION('',(0.E0,1.E0,0.E0));
#3496=DIRECTION('',(1.E0,0.E0,0.E0));
#3497=AXIS2_PLACEMENT_3D('',#3494,#3495,#3496);
#3498=CONICAL_SURFACE('',#3497,3.7E0,4.5E1);
#3500=ORIENTED_EDGE('',*,*,#3499,.F.);
#3501=ORIENTED_EDGE('',*,*,#3476,.T.);
#3503=ORIENTED_EDGE('',*,*,#3502,.T.);
#3505=ORIENTED_EDGE('',*,*,#3504,.F.);
#3506=EDGE_LOOP('',(#3500,#3501,#3503,#3505));
#3507=FACE_OUTER_BOUND('',#3506,.F.);
#3508=ADVANCED_FACE('',(#3507),#3498,.T.);
#3509=CARTESIAN_POINT('',(0.E0,-1.2E0,0.E0));
#3510=DIRECTION('',(0.E0,1.E0,0.E0));
#3511=DIRECTION('',(1.E0,0.E0,0.E0));
#3512=AXIS2_PLACEMENT_3D('',#3509,#3510,#3511);
#3513=CONICAL_SURFACE('',#3512,3.7E0,4.5E1);
#3514=ORIENTED_EDGE('',*,*,#3499,.T.);
#3516=ORIENTED_EDGE('',*,*,#3515,.T.);
#3517=ORIENTED_EDGE('',*,*,#3502,.F.);
#3518=ORIENTED_EDGE('',*,*,#3461,.F.);
#3519=EDGE_LOOP('',(#3514,#3516,#3517,#3518));
#3520=FACE_OUTER_BOUND('',#3519,.F.);
#3521=ADVANCED_FACE('',(#3520),#3513,.T.);
#3522=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#3523=DIRECTION('',(0.E0,-1.E0,0.E0));
#3524=DIRECTION('',(-1.E0,0.E0,0.E0));
#3525=AXIS2_PLACEMENT_3D('',#3522,#3523,#3524);
#3526=PLANE('',#3525);
#3527=ORIENTED_EDGE('',*,*,#3515,.F.);
#3528=ORIENTED_EDGE('',*,*,#3504,.T.);
#3529=EDGE_LOOP('',(#3527,#3528));
#3530=FACE_OUTER_BOUND('',#3529,.F.);
#3532=ORIENTED_EDGE('',*,*,#3531,.T.);
#3534=ORIENTED_EDGE('',*,*,#3533,.T.);
#3536=ORIENTED_EDGE('',*,*,#3535,.T.);
#3538=ORIENTED_EDGE('',*,*,#3537,.T.);
#3540=ORIENTED_EDGE('',*,*,#3539,.T.);
#3542=ORIENTED_EDGE('',*,*,#3541,.T.);
#3543=EDGE_LOOP('',(#3532,#3534,#3536,#3538,#3540,#3542));
#3544=FACE_BOUND('',#3543,.F.);
#3545=ADVANCED_FACE('',(#3530,#3544),#3526,.F.);
#3546=CARTESIAN_POINT('',(1.5E0,0.E0,-8.660254037844E-1));
#3547=DIRECTION('',(5.E-1,0.E0,-8.660254037844E-1));
#3548=DIRECTION('',(-8.660254037844E-1,0.E0,-5.E-1));
#3549=AXIS2_PLACEMENT_3D('',#3546,#3547,#3548);
#3550=PLANE('',#3549);
#3551=ORIENTED_EDGE('',*,*,#3531,.F.);
#3553=ORIENTED_EDGE('',*,*,#3552,.T.);
#3555=ORIENTED_EDGE('',*,*,#3554,.T.);
#3557=ORIENTED_EDGE('',*,*,#3556,.F.);
#3558=EDGE_LOOP('',(#3551,#3553,#3555,#3557));
#3559=FACE_OUTER_BOUND('',#3558,.F.);
#3560=ADVANCED_FACE('',(#3559),#3550,.F.);
#3561=CARTESIAN_POINT('',(1.5E0,0.E0,8.660254037844E-1));
#3562=DIRECTION('',(1.E0,0.E0,0.E0));
#3563=DIRECTION('',(0.E0,0.E0,-1.E0));
#3564=AXIS2_PLACEMENT_3D('',#3561,#3562,#3563);
#3565=PLANE('',#3564);
#3566=ORIENTED_EDGE('',*,*,#3541,.F.);
#3568=ORIENTED_EDGE('',*,*,#3567,.T.);
#3570=ORIENTED_EDGE('',*,*,#3569,.T.);
#3571=ORIENTED_EDGE('',*,*,#3552,.F.);
#3572=EDGE_LOOP('',(#3566,#3568,#3570,#3571));
#3573=FACE_OUTER_BOUND('',#3572,.F.);
#3574=ADVANCED_FACE('',(#3573),#3565,.F.);
#3575=CARTESIAN_POINT('',(0.E0,0.E0,1.732050807569E0));
#3576=DIRECTION('',(5.E-1,0.E0,8.660254037844E-1));
#3577=DIRECTION('',(8.660254037844E-1,0.E0,-5.E-1));
#3578=AXIS2_PLACEMENT_3D('',#3575,#3576,#3577);
#3579=PLANE('',#3578);
#3580=ORIENTED_EDGE('',*,*,#3539,.F.);
#3582=ORIENTED_EDGE('',*,*,#3581,.T.);
#3584=ORIENTED_EDGE('',*,*,#3583,.T.);
#3585=ORIENTED_EDGE('',*,*,#3567,.F.);
#3586=EDGE_LOOP('',(#3580,#3582,#3584,#3585));
#3587=FACE_OUTER_BOUND('',#3586,.F.);
#3588=ADVANCED_FACE('',(#3587),#3579,.F.);
#3589=CARTESIAN_POINT('',(-1.5E0,0.E0,8.660254037844E-1));
#3590=DIRECTION('',(-5.E-1,0.E0,8.660254037844E-1));
#3591=DIRECTION('',(8.660254037844E-1,0.E0,5.E-1));
#3592=AXIS2_PLACEMENT_3D('',#3589,#3590,#3591);
#3593=PLANE('',#3592);
#3594=ORIENTED_EDGE('',*,*,#3537,.F.);
#3596=ORIENTED_EDGE('',*,*,#3595,.T.);
#3598=ORIENTED_EDGE('',*,*,#3597,.T.);
#3599=ORIENTED_EDGE('',*,*,#3581,.F.);
#3600=EDGE_LOOP('',(#3594,#3596,#3598,#3599));
#3601=FACE_OUTER_BOUND('',#3600,.F.);
#3602=ADVANCED_FACE('',(#3601),#3593,.F.);
#3603=CARTESIAN_POINT('',(-1.5E0,0.E0,-8.660254037844E-1));
#3604=DIRECTION('',(-1.E0,0.E0,0.E0));
#3605=DIRECTION('',(0.E0,0.E0,1.E0));
#3606=AXIS2_PLACEMENT_3D('',#3603,#3604,#3605);
#3607=PLANE('',#3606);
#3608=ORIENTED_EDGE('',*,*,#3535,.F.);
#3610=ORIENTED_EDGE('',*,*,#3609,.T.);
#3612=ORIENTED_EDGE('',*,*,#3611,.T.);
#3613=ORIENTED_EDGE('',*,*,#3595,.F.);
#3614=EDGE_LOOP('',(#3608,#3610,#3612,#3613));
#3615=FACE_OUTER_BOUND('',#3614,.F.);
#3616=ADVANCED_FACE('',(#3615),#3607,.F.);
#3617=CARTESIAN_POINT('',(0.E0,0.E0,-1.732050807569E0));
#3618=DIRECTION('',(-5.E-1,0.E0,-8.660254037844E-1));
#3619=DIRECTION('',(-8.660254037844E-1,0.E0,5.E-1));
#3620=AXIS2_PLACEMENT_3D('',#3617,#3618,#3619);
#3621=PLANE('',#3620);
#3622=ORIENTED_EDGE('',*,*,#3533,.F.);
#3623=ORIENTED_EDGE('',*,*,#3556,.T.);
#3625=ORIENTED_EDGE('',*,*,#3624,.T.);
#3626=ORIENTED_EDGE('',*,*,#3609,.F.);
#3627=EDGE_LOOP('',(#3622,#3623,#3625,#3626));
#3628=FACE_OUTER_BOUND('',#3627,.F.);
#3629=ADVANCED_FACE('',(#3628),#3621,.F.);
#3630=CARTESIAN_POINT('',(0.E0,-3.E0,0.E0));
#3631=DIRECTION('',(0.E0,1.E0,0.E0));
#3632=DIRECTION('',(1.E0,0.E0,0.E0));
#3633=AXIS2_PLACEMENT_3D('',#3630,#3631,#3632);
#3634=PLANE('',#3633);
#3635=ORIENTED_EDGE('',*,*,#3554,.F.);
#3636=ORIENTED_EDGE('',*,*,#3569,.F.);
#3637=ORIENTED_EDGE('',*,*,#3583,.F.);
#3638=ORIENTED_EDGE('',*,*,#3597,.F.);
#3639=ORIENTED_EDGE('',*,*,#3611,.F.);
#3640=ORIENTED_EDGE('',*,*,#3624,.F.);
#3641=EDGE_LOOP('',(#3635,#3636,#3637,#3638,#3639,#3640));
#3642=FACE_OUTER_BOUND('',#3641,.F.);
#3643=ADVANCED_FACE('',(#3642),#3634,.T.);
#3644=CLOSED_SHELL('',(#3437,#3452,#3467,#3481,#3493,#3508,#3521,#3545,#3560,
#3574,#3588,#3602,#3616,#3629,#3643));
#3645=MANIFOLD_SOLID_BREP('',#3644);
#3646=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#3647=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#3648=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#3649=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#3648);
#3650=(CONVERSION_BASED_UNIT('DEGREE',#3649)NAMED_UNIT(#3647)PLANE_ANGLE_UNIT(
));
#3651=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#3652=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(1.610625809410E-3),#3646,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#3653=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#3652))GLOBAL_UNIT_ASSIGNED_CONTEXT((#3646,#3650,#3651))REPRESENTATION_CONTEXT(
'ID4','3'));
#3654=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#3655=DIRECTION('',(0.E0,0.E0,1.E0));
#3656=DIRECTION('',(1.E0,0.E0,0.E0));
#3659=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#3660=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#3659);
#3661=DESIGN_CONTEXT('',#3659,'design');
#3662=MECHANICAL_CONTEXT('',#3659,'mechanical');
#3663=PRODUCT('11123_ZGLOB_AL_30X30_D','11123_ZGLOB_AL_30X30_D','NOT SPECIFIED',
(#3662));
#3664=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('2','LAST_VERSION',
#3663,.MADE.);
#3670=CARTESIAN_POINT('',(-1.51E1,2.25E1,0.E0));
#3671=DIRECTION('',(0.E0,0.E0,1.E0));
#3672=DIRECTION('',(0.E0,1.E0,0.E0));
#3673=AXIS2_PLACEMENT_3D('',#3670,#3671,#3672);
#3674=ITEM_DEFINED_TRANSFORMATION('','',#3657,#3673);
#3675=(REPRESENTATION_RELATIONSHIP('','',#3658,#2295)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3674)SHAPE_REPRESENTATION_RELATIONSHIP());
#3676=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3675,#3669);
#3679=CARTESIAN_POINT('',(1.51E1,2.25E1,0.E0));
#3680=DIRECTION('',(0.E0,0.E0,1.E0));
#3681=DIRECTION('',(0.E0,-1.E0,0.E0));
#3682=AXIS2_PLACEMENT_3D('',#3679,#3680,#3681);
#3683=ITEM_DEFINED_TRANSFORMATION('','',#3657,#3682);
#3684=(REPRESENTATION_RELATIONSHIP('','',#3658,#2295)REPRESENTATION_RELATIONSHIP_WITH_TRANSFORMATION(#3683)SHAPE_REPRESENTATION_RELATIONSHIP());
#3685=CONTEXT_DEPENDENT_SHAPE_REPRESENTATION(#3684,#3678);
#3686=(LENGTH_UNIT()NAMED_UNIT(*)SI_UNIT(.MILLI.,.METRE.));
#3687=DIMENSIONAL_EXPONENTS(0.E0,0.E0,0.E0,0.E0,0.E0,0.E0,0.E0);
#3688=(NAMED_UNIT(*)PLANE_ANGLE_UNIT()SI_UNIT($,.RADIAN.));
#3689=PLANE_ANGLE_MEASURE_WITH_UNIT(PLANE_ANGLE_MEASURE(1.745329251994E-2),
#3688);
#3690=(CONVERSION_BASED_UNIT('DEGREE',#3689)NAMED_UNIT(#3687)PLANE_ANGLE_UNIT(
));
#3691=(NAMED_UNIT(*)SI_UNIT($,.STERADIAN.)SOLID_ANGLE_UNIT());
#3692=UNCERTAINTY_MEASURE_WITH_UNIT(LENGTH_MEASURE(6.581590690619E-3),#3686,
'closure',
'Maximum model space distance between geometric entities at asserted connectivities');
#3693=(GEOMETRIC_REPRESENTATION_CONTEXT(3)GLOBAL_UNCERTAINTY_ASSIGNED_CONTEXT((
#3692))GLOBAL_UNIT_ASSIGNED_CONTEXT((#3686,#3690,#3691))REPRESENTATION_CONTEXT(
'ID5','3'));
#3694=CARTESIAN_POINT('',(0.E0,0.E0,0.E0));
#3695=DIRECTION('',(0.E0,0.E0,1.E0));
#3696=DIRECTION('',(1.E0,0.E0,0.E0));
#3698=APPLICATION_CONTEXT(
'CONFIGURATION CONTROLLED 3D DESIGNS OF MECHANICAL PARTS AND ASSEMBLIES');
#3699=APPLICATION_PROTOCOL_DEFINITION('international standard',
'config_control_design',1994,#3698);
#3700=DESIGN_CONTEXT('',#3698,'design');
#3701=MECHANICAL_CONTEXT('',#3698,'mechanical');
#3702=PRODUCT('11123_ZGLOB_AL_30X30_ASM','11123_ZGLOB_AL_30X30_ASM',
'NOT SPECIFIED',(#3701));
#3703=PRODUCT_DEFINITION_FORMATION_WITH_SPECIFIED_SOURCE('4','LAST_VERSION',
#3702,.MADE.);
#3705=PRODUCT_CATEGORY('part','');
#3706=PRODUCT_RELATED_PRODUCT_CATEGORY('assembly','',(#3702));
#3707=PRODUCT_CATEGORY_RELATIONSHIP('','',#3705,#3706);
#3708=PRODUCT_CATEGORY('part','');
#3709=PRODUCT_RELATED_PRODUCT_CATEGORY('detail','',(#2288,#2653,#3227,#3663));
#3710=PRODUCT_CATEGORY_RELATIONSHIP('','',#3708,#3709);
#3711=SECURITY_CLASSIFICATION_LEVEL('unclassified');
#3712=SECURITY_CLASSIFICATION('','',#3711);
#3713=CC_DESIGN_SECURITY_CLASSIFICATION(#3712,(#2289,#2654,#3228,#3664,#3703,
#2296,#2305,#2658,#2667,#3232,#3241,#3668,#3677));
#3714=APPROVAL_STATUS('approved');
#3715=APPROVAL(#3714,'');
#3716=CC_DESIGN_APPROVAL(#3715,(#3712,#2289,#2654,#3228,#3664,#3703,#2290,#2655,
#3229,#3665,#3704));
#3717=CALENDAR_DATE(106,28,5);
#3718=COORDINATED_UNIVERSAL_TIME_OFFSET(3,0,.AHEAD.);
#3719=LOCAL_TIME(9,19,3.8E1,#3718);
#3720=DATE_AND_TIME(#3717,#3719);
#3721=APPROVAL_DATE_TIME(#3720,#3715);
#3722=DATE_TIME_ROLE('creation_date');
#3723=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#3720,#3722,(#2290,#2655,#3229,#3665,
#3704));
#3724=DATE_TIME_ROLE('classification_date');
#3725=CC_DESIGN_DATE_AND_TIME_ASSIGNMENT(#3720,#3724,(#3712));
#3726=PERSON('UNSPECIFIED','UNSPECIFIED',$,$,$,$);
#3727=ORGANIZATION('UNSPECIFIED','UNSPECIFIED','UNSPECIFIED');
#3728=PERSON_AND_ORGANIZATION(#3726,#3727);
#3729=APPROVAL_ROLE('approver');
#3730=APPROVAL_PERSON_ORGANIZATION(#3728,#3715,#3729);
#3731=PERSON_AND_ORGANIZATION_ROLE('creator');
#3732=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#3728,#3731,(#2289,#2654,
#3228,#3664,#3703,#2290,#2655,#3229,#3665,#3704));
#3733=PERSON_AND_ORGANIZATION_ROLE('design_supplier');
#3734=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#3728,#3733,(#2289,#2654,
#3228,#3664,#3703));
#3735=PERSON_AND_ORGANIZATION_ROLE('classification_officer');
#3736=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#3728,#3735,(#3712));
#3737=PERSON_AND_ORGANIZATION_ROLE('design_owner');
#3738=CC_DESIGN_PERSON_AND_ORGANIZATION_ASSIGNMENT(#3728,#3737,(#3702,#2288,
#2653,#3227,#3663));
#5=CIRCLE('',#4,4.15E0);
#10=CIRCLE('',#9,4.15E0);
#15=CIRCLE('',#14,1.5E0);
#40=CIRCLE('',#39,1.5E0);
#65=CIRCLE('',#64,1.5E0);
#90=CIRCLE('',#89,1.5E0);
#123=CIRCLE('',#122,4.15E0);
#128=CIRCLE('',#127,4.15E0);
#133=CIRCLE('',#132,1.5E0);
#142=CIRCLE('',#141,1.5E0);
#151=CIRCLE('',#150,1.5E0);
#160=CIRCLE('',#159,1.5E0);
#373=CIRCLE('',#372,2.E0);
#381=B_SPLINE_CURVE_WITH_KNOTS('',3,(#374,#375,#376,#377,#378,#379,#380),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0.E0,2.5E-1,5.E-1,7.5E-1,1.E0),
.UNSPECIFIED.);
#386=CIRCLE('',#385,2.E0);
#391=CIRCLE('',#390,1.1E1);
#396=CIRCLE('',#395,1.1E1);
#401=CIRCLE('',#400,7.E0);
#406=CIRCLE('',#405,7.E0);
#439=CIRCLE('',#438,1.150665870664E1);
#456=CIRCLE('',#455,1.1E1);
#461=CIRCLE('',#460,1.1E1);
#466=CIRCLE('',#465,7.E0);
#471=CIRCLE('',#470,7.E0);
#476=CIRCLE('',#475,1.2E0);
#481=CIRCLE('',#480,1.2E0);
#486=CIRCLE('',#485,1.2E0);
#491=CIRCLE('',#490,1.2E0);
#512=CIRCLE('',#511,1.2E0);
#517=CIRCLE('',#516,1.2E0);
#522=CIRCLE('',#521,1.2E0);
#527=CIRCLE('',#526,1.2E0);
#580=CIRCLE('',#579,2.1E0);
#585=CIRCLE('',#584,2.1E0);
#590=CIRCLE('',#589,3.7E0);
#599=CIRCLE('',#598,3.7E0);
#608=CIRCLE('',#607,3.7E0);
#617=CIRCLE('',#616,3.7E0);
#630=CIRCLE('',#629,2.1E0);
#635=CIRCLE('',#634,2.1E0);
#640=CIRCLE('',#639,1.350665874122E1);
#649=CIRCLE('',#648,1.350665874122E1);
#654=CIRCLE('',#653,1.350665874122E1);
#659=CIRCLE('',#658,1.350665874122E1);
#695=B_SPLINE_CURVE_WITH_KNOTS('',3,(#688,#689,#690,#691,#692,#693,#694),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0.E0,2.5E-1,5.E-1,7.5E-1,1.E0),
.UNSPECIFIED.);
#700=CIRCLE('',#699,2.E0);
#708=B_SPLINE_CURVE_WITH_KNOTS('',3,(#701,#702,#703,#704,#705,#706,#707),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0.E0,2.5E-1,5.E-1,7.5E-1,1.E0),
.UNSPECIFIED.);
#713=CIRCLE('',#712,2.E0);
#718=CIRCLE('',#717,8.E0);
#723=CIRCLE('',#722,8.E0);
#732=CIRCLE('',#731,1.150665870663E1);
#749=CIRCLE('',#748,8.E0);
#754=CIRCLE('',#753,8.E0);
#759=CIRCLE('',#758,5.6E0);
#768=CIRCLE('',#767,5.6E0);
#777=CIRCLE('',#776,5.6E0);
#782=CIRCLE('',#781,5.6E0);
#790=B_SPLINE_CURVE_WITH_KNOTS('',3,(#783,#784,#785,#786,#787,#788,#789),
.UNSPECIFIED.,.F.,.F.,(4,1,1,1,4),(0.E0,2.5E-1,5.E-1,7.5E-1,1.E0),
.UNSPECIFIED.);
#1044=EDGE_CURVE('',#977,#978,#15,.T.);
#1046=EDGE_CURVE('',#977,#865,#19,.T.);
#1048=EDGE_CURVE('',#865,#866,#23,.T.);
#1050=EDGE_CURVE('',#866,#868,#27,.T.);
#1052=EDGE_CURVE('',#870,#868,#31,.T.);
#1054=EDGE_CURVE('',#870,#986,#35,.T.);
#1056=EDGE_CURVE('',#985,#986,#40,.T.);
#1058=EDGE_CURVE('',#985,#873,#44,.T.);
#1060=EDGE_CURVE('',#873,#874,#48,.T.);
#1062=EDGE_CURVE('',#874,#876,#52,.T.);
#1064=EDGE_CURVE('',#878,#876,#56,.T.);
#1066=EDGE_CURVE('',#878,#1002,#60,.T.);
#1068=EDGE_CURVE('',#1001,#1002,#65,.T.);
#1070=EDGE_CURVE('',#1001,#857,#69,.T.);
#1072=EDGE_CURVE('',#857,#858,#73,.T.);
#1074=EDGE_CURVE('',#858,#860,#77,.T.);
#1076=EDGE_CURVE('',#862,#860,#81,.T.);
#1078=EDGE_CURVE('',#862,#994,#85,.T.);
#1080=EDGE_CURVE('',#993,#994,#90,.T.);
#1082=EDGE_CURVE('',#993,#849,#94,.T.);
#1084=EDGE_CURVE('',#849,#850,#98,.T.);
#1086=EDGE_CURVE('',#850,#852,#102,.T.);
#1088=EDGE_CURVE('',#854,#852,#106,.T.);
#1090=EDGE_CURVE('',#854,#978,#110,.T.);
#1094=EDGE_CURVE('',#881,#882,#5,.T.);
#1096=EDGE_CURVE('',#882,#881,#10,.T.);
#1107=EDGE_CURVE('',#886,#882,#118,.T.);
#1109=EDGE_CURVE('',#885,#886,#123,.T.);
#1111=EDGE_CURVE('',#885,#881,#114,.T.);
#1123=EDGE_CURVE('',#886,#885,#128,.T.);
#1134=EDGE_CURVE('',#980,#982,#133,.T.);
#1136=EDGE_CURVE('',#998,#980,#137,.T.);
#1138=EDGE_CURVE('',#996,#998,#142,.T.);
#1140=EDGE_CURVE('',#1006,#996,#146,.T.);
#1142=EDGE_CURVE('',#1004,#1006,#151,.T.);
#1144=EDGE_CURVE('',#990,#1004,#155,.T.);
#1146=EDGE_CURVE('',#988,#990,#160,.T.);
#1148=EDGE_CURVE('',#982,#988,#164,.T.);
#1156=EDGE_CURVE('',#1010,#812,#168,.T.);
#1158=EDGE_CURVE('',#1014,#1010,#381,.T.);
#1160=EDGE_CURVE('',#1020,#1014,#172,.T.);
#1162=EDGE_CURVE('',#1022,#1020,#695,.T.);
#1164=EDGE_CURVE('',#1022,#808,#176,.T.);
#1166=EDGE_CURVE('',#812,#808,#625,.T.);
#1170=EDGE_CURVE('',#1030,#1036,#180,.T.);
#1172=EDGE_CURVE('',#1038,#1036,#790,.T.);
#1174=EDGE_CURVE('',#814,#1038,#184,.T.);
#1176=EDGE_CURVE('',#814,#810,#188,.T.);
#1178=EDGE_CURVE('',#810,#1026,#192,.T.);
#1180=EDGE_CURVE('',#1030,#1026,#708,.T.);
#1191=EDGE_CURVE('',#980,#978,#196,.T.);
#1194=EDGE_CURVE('',#982,#977,#320,.T.);
#1206=EDGE_CURVE('',#854,#817,#200,.T.);
#1208=EDGE_CURVE('',#817,#818,#220,.T.);
#1210=EDGE_CURVE('',#849,#818,#216,.T.);
#1213=EDGE_CURVE('',#998,#993,#204,.T.);
#1225=EDGE_CURVE('',#852,#822,#208,.T.);
#1227=EDGE_CURVE('',#822,#817,#224,.T.);
#1239=EDGE_CURVE('',#850,#820,#212,.T.);
#1241=EDGE_CURVE('',#820,#822,#228,.T.);
#1254=EDGE_CURVE('',#818,#820,#232,.T.);
#1277=EDGE_CURVE('',#825,#826,#236,.T.);
#1279=EDGE_CURVE('',#830,#825,#240,.T.);
#1281=EDGE_CURVE('',#828,#830,#244,.T.);
#1283=EDGE_CURVE('',#826,#828,#248,.T.);
#1293=EDGE_CURVE('',#833,#834,#252,.T.);
#1295=EDGE_CURVE('',#838,#833,#256,.T.);
#1297=EDGE_CURVE('',#836,#838,#260,.T.);
#1299=EDGE_CURVE('',#834,#836,#264,.T.);
#1309=EDGE_CURVE('',#841,#842,#268,.T.);
#1311=EDGE_CURVE('',#846,#841,#272,.T.);
#1313=EDGE_CURVE('',#844,#846,#276,.T.);
#1315=EDGE_CURVE('',#842,#844,#280,.T.);
#1325=EDGE_CURVE('',#996,#994,#284,.T.);
#1328=EDGE_CURVE('',#862,#825,#288,.T.);
#1331=EDGE_CURVE('',#857,#826,#304,.T.);
#1334=EDGE_CURVE('',#1006,#1001,#292,.T.);
#1358=EDGE_CURVE('',#860,#830,#296,.T.);
#1371=EDGE_CURVE('',#858,#828,#300,.T.);
#1396=EDGE_CURVE('',#1004,#1002,#312,.T.);
#1408=EDGE_CURVE('',#990,#985,#308,.T.);
#1413=EDGE_CURVE('',#878,#846,#316,.T.);
#1416=EDGE_CURVE('',#873,#841,#352,.T.);
#1428=EDGE_CURVE('',#988,#986,#324,.T.);
#1444=EDGE_CURVE('',#870,#838,#328,.T.);
#1447=EDGE_CURVE('',#865,#833,#340,.T.);
#1459=EDGE_CURVE('',#868,#836,#332,.T.);
#1472=EDGE_CURVE('',#866,#834,#336,.T.);
#1497=EDGE_CURVE('',#876,#844,#344,.T.);
#1510=EDGE_CURVE('',#874,#842,#348,.T.);
#1534=EDGE_CURVE('',#1009,#1010,#356,.T.);
#1537=EDGE_CURVE('',#812,#801,#360,.T.);
#1539=EDGE_CURVE('',#1009,#801,#644,.T.);
#1549=EDGE_CURVE('',#1038,#1034,#364,.T.);
#1551=EDGE_CURVE('',#806,#1034,#663,.T.);
#1553=EDGE_CURVE('',#814,#806,#368,.T.);
#1565=EDGE_CURVE('',#1013,#1009,#373,.T.);
#1567=EDGE_CURVE('',#1013,#1014,#434,.T.);
#1578=EDGE_CURVE('',#1016,#1013,#439,.T.);
#1581=EDGE_CURVE('',#1018,#1009,#640,.T.);
#1583=EDGE_CURVE('',#1016,#1018,#386,.T.);
#1593=EDGE_CURVE('',#917,#918,#401,.T.);
#1595=EDGE_CURVE('',#918,#917,#406,.T.);
#1599=EDGE_CURVE('',#929,#930,#410,.T.);
#1601=EDGE_CURVE('',#933,#930,#599,.T.);
#1603=EDGE_CURVE('',#933,#934,#414,.T.);
#1605=EDGE_CURVE('',#934,#936,#418,.T.);
#1607=EDGE_CURVE('',#936,#938,#422,.T.);
#1609=EDGE_CURVE('',#941,#938,#608,.T.);
#1611=EDGE_CURVE('',#941,#942,#426,.T.);
#1613=EDGE_CURVE('',#942,#929,#430,.T.);
#1625=EDGE_CURVE('',#1020,#1016,#443,.T.);
#1630=EDGE_CURVE('',#913,#914,#391,.T.);
#1632=EDGE_CURVE('',#914,#913,#396,.T.);
#1643=EDGE_CURVE('',#913,#905,#447,.T.);
#1645=EDGE_CURVE('',#905,#906,#456,.T.);
#1647=EDGE_CURVE('',#914,#906,#451,.T.);
#1659=EDGE_CURVE('',#906,#905,#461,.T.);
#1674=EDGE_CURVE('',#909,#910,#466,.T.);
#1676=EDGE_CURVE('',#910,#909,#471,.T.);
#1680=EDGE_CURVE('',#961,#962,#476,.T.);
#1682=EDGE_CURVE('',#962,#961,#481,.T.);
#1686=EDGE_CURVE('',#965,#966,#486,.T.);
#1688=EDGE_CURVE('',#966,#965,#491,.T.);
#1699=EDGE_CURVE('',#918,#909,#495,.T.);
#1702=EDGE_CURVE('',#917,#910,#499,.T.);
#1725=EDGE_CURVE('',#961,#953,#503,.T.);
#1727=EDGE_CURVE('',#953,#954,#512,.T.);
#1729=EDGE_CURVE('',#962,#954,#507,.T.);
#1741=EDGE_CURVE('',#954,#953,#517,.T.);
#1762=EDGE_CURVE('',#957,#958,#522,.T.);
#1764=EDGE_CURVE('',#958,#957,#527,.T.);
#1775=EDGE_CURVE('',#965,#957,#531,.T.);
#1778=EDGE_CURVE('',#966,#958,#535,.T.);
#1801=EDGE_CURVE('',#929,#926,#539,.T.);
#1803=EDGE_CURVE('',#926,#944,#567,.T.);
#1805=EDGE_CURVE('',#930,#944,#603,.T.);
#1816=EDGE_CURVE('',#933,#948,#594,.T.);
#1818=EDGE_CURVE('',#948,#921,#563,.T.);
#1820=EDGE_CURVE('',#934,#921,#551,.T.);
#1831=EDGE_CURVE('',#942,#925,#543,.T.);
#1833=EDGE_CURVE('',#925,#926,#571,.T.);
#1845=EDGE_CURVE('',#936,#922,#547,.T.);
#1847=EDGE_CURVE('',#922,#950,#555,.T.);
#1849=EDGE_CURVE('',#938,#950,#612,.T.);
#1860=EDGE_CURVE('',#941,#946,#621,.T.);
#1862=EDGE_CURVE('',#946,#925,#575,.T.);
#1875=EDGE_CURVE('',#921,#922,#559,.T.);
#1886=EDGE_CURVE('',#950,#946,#617,.T.);
#1891=EDGE_CURVE('',#944,#948,#590,.T.);
#1898=EDGE_CURVE('',#973,#974,#580,.T.);
#1900=EDGE_CURVE('',#974,#973,#585,.T.);
#1934=EDGE_CURVE('',#969,#970,#630,.T.);
#1936=EDGE_CURVE('',#973,#969,#798,.T.);
#1939=EDGE_CURVE('',#974,#970,#794,.T.);
#1949=EDGE_CURVE('',#801,#802,#649,.T.);
#1953=EDGE_CURVE('',#802,#808,#675,.T.);
#1958=EDGE_CURVE('',#970,#969,#635,.T.);
#1971=EDGE_CURVE('',#1018,#802,#671,.T.);
#1981=EDGE_CURVE('',#1034,#1025,#654,.T.);
#1983=EDGE_CURVE('',#805,#1025,#687,.T.);
#1985=EDGE_CURVE('',#805,#806,#659,.T.);
#1996=EDGE_CURVE('',#1022,#1018,#667,.T.);
#2009=EDGE_CURVE('',#1025,#1026,#679,.T.);
#2012=EDGE_CURVE('',#805,#810,#683,.T.);
#2036=EDGE_CURVE('',#1029,#1025,#700,.T.);
#2038=EDGE_CURVE('',#1029,#1030,#727,.T.);
#2049=EDGE_CURVE('',#1032,#1029,#732,.T.);
#2053=EDGE_CURVE('',#1032,#1034,#713,.T.);
#2065=EDGE_CURVE('',#1036,#1032,#736,.T.);
#2070=EDGE_CURVE('',#897,#898,#718,.T.);
#2072=EDGE_CURVE('',#898,#897,#723,.T.);
#2083=EDGE_CURVE('',#897,#893,#740,.T.);
#2085=EDGE_CURVE('',#893,#894,#749,.T.);
#2087=EDGE_CURVE('',#898,#894,#744,.T.);
#2099=EDGE_CURVE('',#894,#893,#754,.T.);
#2114=EDGE_CURVE('',#901,#902,#759,.T.);
#2116=EDGE_CURVE('',#902,#901,#768,.T.);
#2127=EDGE_CURVE('',#901,#889,#763,.T.);
#2129=EDGE_CURVE('',#889,#890,#777,.T.);
#2131=EDGE_CURVE('',#902,#890,#772,.T.);
#2143=EDGE_CURVE('',#890,#889,#782,.T.);
#2194=CIRCLE('',#2193,2.5E0);
#2199=CIRCLE('',#2198,2.5E0);
#2204=CIRCLE('',#2203,2.5E0);
#2213=CIRCLE('',#2212,2.5E0);
#2231=EDGE_CURVE('',#2221,#2220,#2194,.T.);
#2233=EDGE_CURVE('',#2220,#2224,#2217,.T.);
#2235=EDGE_CURVE('',#2224,#2225,#2199,.T.);
#2237=EDGE_CURVE('',#2221,#2225,#2208,.T.);
#2247=EDGE_CURVE('',#2220,#2221,#2204,.T.);
#2250=EDGE_CURVE('',#2225,#2224,#2213,.T.);
#2270=AXIS2_PLACEMENT_3D('',#2267,#2268,#2269);
#2271=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#2270,#2257),#2266);
#2275=AXIS2_PLACEMENT_3D('',#2272,#2273,#2274);
#2276=MANIFOLD_SURFACE_SHAPE_REPRESENTATION('',(#2275,#2258),#2266);
#2280=AXIS2_PLACEMENT_3D('',#2277,#2278,#2279);
#2281=SHAPE_REPRESENTATION('',(#2280),#2266);
#2290=PRODUCT_DEFINITION('design','',#2289,#2286);
#2291=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 11123_ZGLOB_AL_30X30_A.',#2290);
#2292=SHAPE_DEFINITION_REPRESENTATION(#2291,#2281);
#2293=SHAPE_DEFINITION_REPRESENTATION(#2294,#2295);
#2294=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 11123_ZGLOB_AL_30X30_ASM.',#3704);
#2295=SHAPE_REPRESENTATION('',(#2301,#2310,#2663,#2672,#3237,#3246,#3673,#3682,
#3697),#3693);
#2296=NEXT_ASSEMBLY_USAGE_OCCURRENCE('40','Next assembly relationship',
'11123_ZGLOB_AL_30X30_A',#3704,#2290,$);
#2297=PRODUCT_DEFINITION_SHAPE('Placement #40',
'Placement of 11123_ZGLOB_AL_30X30_A with respect to 11123_ZGLOB_AL_30X30_ASM',
#2296);
#2305=NEXT_ASSEMBLY_USAGE_OCCURRENCE('41','Next assembly relationship',
'11123_ZGLOB_AL_30X30_A',#3704,#2290,$);
#2306=PRODUCT_DEFINITION_SHAPE('Placement #41',
'Placement of 11123_ZGLOB_AL_30X30_A with respect to 11123_ZGLOB_AL_30X30_ASM',
#2305);
#2318=CIRCLE('',#2317,7.15E0);
#2323=CIRCLE('',#2322,7.15E0);
#2328=CIRCLE('',#2327,1.09E1);
#2333=CIRCLE('',#2332,1.09E1);
#2346=CIRCLE('',#2345,7.15E0);
#2351=CIRCLE('',#2350,7.15E0);
#2356=CIRCLE('',#2355,1.09E1);
#2361=CIRCLE('',#2360,1.09E1);
#2366=CIRCLE('',#2365,1.15E0);
#2371=CIRCLE('',#2370,1.15E0);
#2376=CIRCLE('',#2375,1.15E0);
#2381=CIRCLE('',#2380,1.15E0);
#2402=CIRCLE('',#2401,1.15E0);
#2407=CIRCLE('',#2406,1.15E0);
#2412=CIRCLE('',#2411,1.15E0);
#2417=CIRCLE('',#2416,1.15E0);
#2463=EDGE_CURVE('',#2432,#2433,#2328,.T.);
#2465=EDGE_CURVE('',#2433,#2432,#2333,.T.);
#2469=EDGE_CURVE('',#2428,#2429,#2318,.T.);
#2471=EDGE_CURVE('',#2429,#2428,#2323,.T.);
#2482=EDGE_CURVE('',#2428,#2436,#2337,.T.);
#2484=EDGE_CURVE('',#2436,#2437,#2346,.T.);
#2486=EDGE_CURVE('',#2429,#2437,#2341,.T.);
#2498=EDGE_CURVE('',#2437,#2436,#2351,.T.);
#2509=EDGE_CURVE('',#2440,#2441,#2356,.T.);
#2511=EDGE_CURVE('',#2441,#2440,#2361,.T.);
#2519=EDGE_CURVE('',#2452,#2453,#2366,.T.);
#2521=EDGE_CURVE('',#2453,#2452,#2371,.T.);
#2525=EDGE_CURVE('',#2456,#2457,#2376,.T.);
#2527=EDGE_CURVE('',#2457,#2456,#2381,.T.);
#2538=EDGE_CURVE('',#2432,#2440,#2385,.T.);
#2541=EDGE_CURVE('',#2433,#2441,#2389,.T.);
#2564=EDGE_CURVE('',#2452,#2444,#2393,.T.);
#2566=EDGE_CURVE('',#2444,#2445,#2402,.T.);
#2568=EDGE_CURVE('',#2453,#2445,#2397,.T.);
#2580=EDGE_CURVE('',#2445,#2444,#2407,.T.);
#2601=EDGE_CURVE('',#2448,#2449,#2412,.T.);
#2603=EDGE_CURVE('',#2449,#2448,#2417,.T.);
#2614=EDGE_CURVE('',#2456,#2448,#2421,.T.);
#2617=EDGE_CURVE('',#2457,#2449,#2425,.T.);
#2647=AXIS2_PLACEMENT_3D('',#2644,#2645,#2646);
#2648=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#2647,#2635),#2643);
#2655=PRODUCT_DEFINITION('design','',#2654,#2651);
#2656=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 11123_ZGLOB_AL_30X30_B.',#2655);
#2657=SHAPE_DEFINITION_REPRESENTATION(#2656,#2648);
#2658=NEXT_ASSEMBLY_USAGE_OCCURRENCE('42','Next assembly relationship',
'11123_ZGLOB_AL_30X30_B',#3704,#2655,$);
#2659=PRODUCT_DEFINITION_SHAPE('Placement #42',
'Placement of 11123_ZGLOB_AL_30X30_B with respect to 11123_ZGLOB_AL_30X30_ASM',
#2658);
#2667=NEXT_ASSEMBLY_USAGE_OCCURRENCE('43','Next assembly relationship',
'11123_ZGLOB_AL_30X30_B',#3704,#2655,$);
#2668=PRODUCT_DEFINITION_SHAPE('Placement #43',
'Placement of 11123_ZGLOB_AL_30X30_B with respect to 11123_ZGLOB_AL_30X30_ASM',
#2667);
#2688=CIRCLE('',#2687,3.8E0);
#2697=CIRCLE('',#2696,3.8E0);
#2706=CIRCLE('',#2705,3.8E0);
#2719=CIRCLE('',#2718,3.8E0);
#2724=CIRCLE('',#2723,3.8E0);
#2733=CIRCLE('',#2732,7.7E0);
#2738=CIRCLE('',#2737,7.7E0);
#2759=CIRCLE('',#2758,7.7E0);
#2772=CIRCLE('',#2771,5.300000673887E0);
#2777=CIRCLE('',#2776,5.300000673887E0);
#2782=CIRCLE('',#2781,5.699999692705E0);
#2787=CIRCLE('',#2786,5.699999692705E0);
#2800=CIRCLE('',#2799,3.8E0);
#2813=CIRCLE('',#2812,3.8E0);
#2818=CIRCLE('',#2817,3.8E0);
#2827=CIRCLE('',#2826,5.575E0);
#2836=CIRCLE('',#2835,5.575E0);
#2845=CIRCLE('',#2844,5.575E0);
#2854=CIRCLE('',#2853,5.575E0);
#2867=CIRCLE('',#2866,7.7E0);
#2933=EDGE_CURVE('',#2894,#2895,#2679,.T.);
#2935=EDGE_CURVE('',#2899,#2894,#2827,.T.);
#2937=EDGE_CURVE('',#2898,#2899,#2683,.T.);
#2939=EDGE_CURVE('',#2895,#2898,#2688,.T.);
#2949=EDGE_CURVE('',#2902,#2903,#2692,.T.);
#2951=EDGE_CURVE('',#2906,#2903,#2697,.T.);
#2953=EDGE_CURVE('',#2906,#2907,#2701,.T.);
#2955=EDGE_CURVE('',#2902,#2907,#2854,.T.);
#2966=EDGE_CURVE('',#2895,#2919,#2710,.T.);
#2968=EDGE_CURVE('',#2919,#2913,#2742,.T.);
#2970=EDGE_CURVE('',#2913,#2894,#2831,.T.);
#2981=EDGE_CURVE('',#2909,#2899,#2840,.T.);
#2983=EDGE_CURVE('',#2909,#2922,#2754,.T.);
#2985=EDGE_CURVE('',#2898,#2922,#2714,.T.);
#2995=EDGE_CURVE('',#2918,#2919,#2706,.T.);
#3000=EDGE_CURVE('',#2922,#2923,#2719,.T.);
#3002=EDGE_CURVE('',#2883,#2923,#2822,.T.);
#3004=EDGE_CURVE('',#2883,#2882,#2724,.T.);
#3006=EDGE_CURVE('',#2882,#2918,#2728,.T.);
#3016=EDGE_CURVE('',#2874,#2875,#2733,.T.);
#3018=EDGE_CURVE('',#2875,#2874,#2738,.T.);
#3022=EDGE_CURVE('',#2913,#2909,#2836,.T.);
#3026=EDGE_CURVE('',#2927,#2918,#2813,.T.);
#3028=EDGE_CURVE('',#2915,#2927,#2746,.T.);
#3030=EDGE_CURVE('',#2911,#2915,#2845,.T.);
#3032=EDGE_CURVE('',#2925,#2911,#2750,.T.);
#3034=EDGE_CURVE('',#2923,#2925,#2800,.T.);
#3046=EDGE_CURVE('',#2890,#2891,#2759,.T.);
#3048=EDGE_CURVE('',#2875,#2891,#2871,.T.);
#3051=EDGE_CURVE('',#2874,#2890,#2763,.T.);
#3061=EDGE_CURVE('',#2886,#2887,#2782,.T.);
#3063=EDGE_CURVE('',#2887,#2891,#2862,.T.);
#3066=EDGE_CURVE('',#2886,#2890,#2767,.T.);
#3077=EDGE_CURVE('',#2887,#2886,#2787,.T.);
#3081=EDGE_CURVE('',#2878,#2879,#2772,.T.);
#3083=EDGE_CURVE('',#2879,#2878,#2777,.T.);
#3094=EDGE_CURVE('',#2879,#2883,#2795,.T.);
#3096=EDGE_CURVE('',#2882,#2883,#2818,.T.);
#3098=EDGE_CURVE('',#2878,#2882,#2791,.T.);
#3121=EDGE_CURVE('',#2906,#2925,#2804,.T.);
#3124=EDGE_CURVE('',#2903,#2927,#2808,.T.);
#3139=EDGE_CURVE('',#2915,#2902,#2849,.T.);
#3154=EDGE_CURVE('',#2911,#2907,#2858,.T.);
#3190=EDGE_CURVE('',#2891,#2890,#2867,.T.);
#3221=AXIS2_PLACEMENT_3D('',#3218,#3219,#3220);
#3222=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#3221,#3209),#3217);
#3229=PRODUCT_DEFINITION('design','',#3228,#3225);
#3230=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 11123_ZGLOB_AL_30X30_C.',#3229);
#3231=SHAPE_DEFINITION_REPRESENTATION(#3230,#3222);
#3232=NEXT_ASSEMBLY_USAGE_OCCURRENCE('44','Next assembly relationship',
'11123_ZGLOB_AL_30X30_C',#3704,#3229,$);
#3233=PRODUCT_DEFINITION_SHAPE('Placement #44',
'Placement of 11123_ZGLOB_AL_30X30_C with respect to 11123_ZGLOB_AL_30X30_ASM',
#3232);
#3241=NEXT_ASSEMBLY_USAGE_OCCURRENCE('45','Next assembly relationship',
'11123_ZGLOB_AL_30X30_C',#3704,#3229,$);
#3242=PRODUCT_DEFINITION_SHAPE('Placement #45',
'Placement of 11123_ZGLOB_AL_30X30_C with respect to 11123_ZGLOB_AL_30X30_ASM',
#3241);
#3254=CIRCLE('',#3253,1.999999324502E0);
#3259=CIRCLE('',#3258,1.999999324502E0);
#3268=CIRCLE('',#3267,2.5E0);
#3281=CIRCLE('',#3280,2.5E0);
#3290=CIRCLE('',#3289,2.5E0);
#3303=CIRCLE('',#3302,2.5E0);
#3308=CIRCLE('',#3307,4.9E0);
#3313=CIRCLE('',#3312,4.9E0);
#3431=EDGE_CURVE('',#3400,#3401,#3254,.T.);
#3433=EDGE_CURVE('',#3401,#3400,#3259,.T.);
#3443=EDGE_CURVE('',#3396,#3397,#3268,.T.);
#3445=EDGE_CURVE('',#3397,#3401,#3285,.T.);
#3448=EDGE_CURVE('',#3396,#3400,#3263,.T.);
#3459=EDGE_CURVE('',#3396,#3388,#3272,.T.);
#3461=EDGE_CURVE('',#3388,#3392,#3303,.T.);
#3463=EDGE_CURVE('',#3397,#3392,#3276,.T.);
#3473=EDGE_CURVE('',#3397,#3396,#3281,.T.);
#3476=EDGE_CURVE('',#3388,#3392,#3290,.T.);
#3499=EDGE_CURVE('',#3388,#3389,#3294,.T.);
#3502=EDGE_CURVE('',#3392,#3393,#3298,.T.);
#3504=EDGE_CURVE('',#3389,#3393,#3313,.T.);
#3515=EDGE_CURVE('',#3389,#3393,#3308,.T.);
#3531=EDGE_CURVE('',#3416,#3417,#3317,.T.);
#3533=EDGE_CURVE('',#3417,#3419,#3321,.T.);
#3535=EDGE_CURVE('',#3419,#3421,#3325,.T.);
#3537=EDGE_CURVE('',#3421,#3423,#3329,.T.);
#3539=EDGE_CURVE('',#3423,#3425,#3333,.T.);
#3541=EDGE_CURVE('',#3425,#3416,#3337,.T.);
#3552=EDGE_CURVE('',#3416,#3404,#3341,.T.);
#3554=EDGE_CURVE('',#3404,#3405,#3365,.T.);
#3556=EDGE_CURVE('',#3417,#3405,#3361,.T.);
#3567=EDGE_CURVE('',#3425,#3413,#3345,.T.);
#3569=EDGE_CURVE('',#3413,#3404,#3369,.T.);
#3581=EDGE_CURVE('',#3423,#3411,#3349,.T.);
#3583=EDGE_CURVE('',#3411,#3413,#3373,.T.);
#3595=EDGE_CURVE('',#3421,#3409,#3353,.T.);
#3597=EDGE_CURVE('',#3409,#3411,#3377,.T.);
#3609=EDGE_CURVE('',#3419,#3407,#3357,.T.);
#3611=EDGE_CURVE('',#3407,#3409,#3381,.T.);
#3624=EDGE_CURVE('',#3405,#3407,#3385,.T.);
#3657=AXIS2_PLACEMENT_3D('',#3654,#3655,#3656);
#3658=ADVANCED_BREP_SHAPE_REPRESENTATION('',(#3657,#3645),#3653);
#3665=PRODUCT_DEFINITION('design','',#3664,#3661);
#3666=PRODUCT_DEFINITION_SHAPE('','SHAPE FOR 11123_ZGLOB_AL_30X30_D.',#3665);
#3667=SHAPE_DEFINITION_REPRESENTATION(#3666,#3658);
#3668=NEXT_ASSEMBLY_USAGE_OCCURRENCE('46','Next assembly relationship',
'11123_ZGLOB_AL_30X30_D',#3704,#3665,$);
#3669=PRODUCT_DEFINITION_SHAPE('Placement #46',
'Placement of 11123_ZGLOB_AL_30X30_D with respect to 11123_ZGLOB_AL_30X30_ASM',
#3668);
#3677=NEXT_ASSEMBLY_USAGE_OCCURRENCE('47','Next assembly relationship',
'11123_ZGLOB_AL_30X30_D',#3704,#3665,$);
#3678=PRODUCT_DEFINITION_SHAPE('Placement #47',
'Placement of 11123_ZGLOB_AL_30X30_D with respect to 11123_ZGLOB_AL_30X30_ASM',
#3677);
#3697=AXIS2_PLACEMENT_3D('',#3694,#3695,#3696);
#3704=PRODUCT_DEFINITION('design','',#3703,#3700);
ENDSEC;
END-ISO-10303-21;